The Marmitek MegaView 91 is an HDMI extender that carries high-definition video and audio over a single CAT5e or CAT6 cable, supporting distances of up to 100 m on CAT5e and up to 120 m on CAT6 at 1080p. Unlike simpler extenders, the MegaView 91 can also operate over an existing home network (LAN), including routers and network switches, allowing multiple receivers to be connected simultaneously to the same network.

A built-in HDMI loop-through output on the transmitter lets you watch the same content locally on a primary display while the receiver feeds a secondary screen or projector. The infrared return function allows the source device to be controlled from the receiver location using the original remote control.

Key Features

• HDMI extension over a single CAT5e or CAT6 cable, or through an existing home network (LAN)
• Maximum cable length: 100 m @ 1080p on CAT5e; 120 m @ 1080p on CAT6
• Built-in HDMI loop-through (HDMI OUT) on the transmitter for simultaneous local viewing
• Multiple receivers can connect simultaneously to the same LAN
• Infrared return with 3.5 mm jack IR receiver cable (100 cm), frequency range 30–60 kHz, reception range ±6 metres
• Data transmission via TCP/IP with H.264 compression

Product Benefits

• Works over an existing home network — no dedicated cable run required where LAN infrastructure is already in place
• The HDMI loop-through on the transmitter means the room with the source device continues to receive the signal without any extra splitter
• Multiple receivers on the same network allow distribution to several rooms from a single source
• Infrared passback lets users control the source from the remote viewing location using their own remote
• Wide power supply range (100–240 VAC) suits any European or international mains socket

Technical Specifications

• Signal Extension: HDMI over CAT5e or CAT6, or via existing home LAN (TCP/IP, H.264)
• Maximum Cable Length (CAT5e): 100 m @ 1080p
• Maximum Cable Length (CAT6): 120 m @ 1080p
• Supported HDTV Resolutions: 480p, 576i, 576p, 720p, 1080i, 1080p
• Maximum Pixel Frequency: 225 MHz
• Maximum Bit Rate: 2.25 Gbps
• Audio Format: PCM stereo
• Transmitter Inputs: 1x HDMI in (19-pin female), 1x HDMI out loop-through (19-pin female)
• Transmitter LAN: RJ45, EIA/TIA T568B
• Receiver Output: 1x HDMI (19-pin female)
• Receiver LAN: RJ45, EIA/TIA T568B
• IR Frequency Range: 30–60 kHz
• IR Reception Range: ±6 metres
• IR Connection: 3.5 mm jack plug
• IR Cable Length: 100 cm
• Power Input: 100–240 VAC @ 50–60 Hz
• Power Output: 5 VDC @ 1 A
• In the Box: 1x transmitter, 1x receiver, 1x IR receiver, 1x IR blaster LED, 2x power adaptors, 1x user manual

Why You'll Love It

• Connects through an existing LAN — no dedicated cable run needed in homes already wired for networking
• The HDMI loop-through on the transmitter keeps the local TV or monitor active without any additional equipment
• Multiple simultaneous receivers mean a single source device can feed several rooms at once
• Complete kit includes IR receiver and IR blaster LED for a full remote-control return setup out of the box