Collection: Satellite Dish Mounting

The bracket you need depends on your dish diameter and wall or roof material. Most standard 60–80 cm dishes suit a medium-duty wall bracket rated for that diameter. Larger dishes (90–120 cm) need heavy-duty steel brackets with wider fixing centres for stability in wind. Check the bracket's maximum dish diameter in the product specs before ordering — and if you're also adding a motor, pair it with a compatible mast from our Satellite Dish Actuators & Motors range.

Yes — flat-roof tripod or ballast stands let you install a dish without penetrating the roof membrane. These stands are weighted down (usually with paving slabs or ballast bags) and are ideal for rental properties or where waterproofing must remain intact. Ensure the combined weight of the stand and ballast is sufficient for your local wind load requirements. Browse our Satellite Dish Mounting range for available tripod options.

After securely fixing the bracket, use a satellite finder app or a dedicated signal meter to locate the correct satellite. Adjust the dish azimuth (left/right) and elevation (up/down) while monitoring signal strength, then lock the bolts once you reach peak signal. For multi-satellite setups with a motorised mount, see our Satellite Dish Actuators & Motors. Your DVB-S2 Receiver will typically display a signal bar to guide fine-tuning.

Most mounting hardware in our range uses hot-dip galvanising, electro-galvanising, or powder-coat finishes specifically chosen to resist salt air and humidity. Look for products marked as corrosion-resistant or marine-grade in the product description. If you're in a high-salinity coastal environment, we recommend hot-dip galvanised steel or marine aluminium options from our Satellite Dish Mounting collection for the best long-term performance.

A typical wall bracket installation requires a rotary hammer drill with masonry bits (for concrete or brick walls), a spirit level, a torque wrench or socket set, and appropriate wall plugs and bolts rated for outdoor use. For tile or sheet-metal roofs you may also need roofing screws and sealant. Once the bracket is fixed, run your coaxial cable neatly to your receiver — cable clips and weatherproof connectors are available in our Power & Cables section.

We deliver fast across Greece. Orders over €80 qualify for free shipping. For orders below that threshold a standard shipping fee applies at checkout. Full details on delivery times, courier partners, and options for remote areas are available on our Shipping page. Most in-stock orders are dispatched the same or next business day.

All mounting hardware sold through Lynk.gr is covered by the statutory warranty provided under Greek and EU consumer law. Our Warranty page explains the process for raising a warranty claim. Additionally, every purchase is backed by our Lynk Buyer Protection policy, which gives you extra peace of mind on every order.

Many pole and mast brackets are compatible with both satellite dishes and terrestrial Yagi or log-periodic antennas, as long as the pole diameter matches the clamp size of each antenna. Check the clamp diameter spec on both the antenna and the mounting hardware before combining. For a complete TV setup — satellite plus terrestrial — pair your mounting solution with a DVB-S2 Receiver and explore the wider Satellite & Terrestrial Receivers category for compatible dual-tuner devices.