The Tenda TEG1105PD is a compact Gigabit PoE switch designed for surveillance and networking deployments where an independent mains power supply is impractical. It accepts IEEE 802.3af/at PoE input on port 5 from an upstream PSE switch, then distributes that power to up to four IEEE 802.3af-compliant devices — such as IP cameras and low-power access points — through ports 1–4 at up to 15.4 W per port.

All five ports operate at 10/100/1000 Mbps Gigabit speeds with a non-blocking 10 Gbps switching fabric and a packet forwarding rate of 7.44 Mpps. The switch supports auto MDI/MDIX, store-and-forward mode, a 2K MAC address table, 9K jumbo frames, and 1 Mb of buffer memory. The compact form factor fits inside a standard waterproof outdoor enclosure.

Key Features

• 5-port Gigabit switch: 4 × PoE OUT (ports 1–4, IEEE 802.3af) and 1 × PoE IN (port 5, IEEE 802.3af/at)
• Total PoE output budget: 30 W
• Single port PoE budget: 15.4 W (AF)
• 10 Gbps non-blocking switching capacity
• Packet forwarding rate: 7.44 Mpps
• 2K MAC address table and 1 Mb buffer
• 9K jumbo frame support
• 6 kV lightning protection
• Gigabit performance maintained up to 200 m cable length
• Certifications: FCC, RoHS

Product Benefits

• Powering the switch via PoE IN on port 5 eliminates the need for a separate mains socket at the installation point, enabling deployment in outdoor enclosures or remote cabinets
• The four PoE OUT ports allow a single switch to power and connect up to four IP cameras or low-power APs from one cable run
• Gigabit speeds on all ports prevent bottlenecks when streaming high-resolution camera feeds simultaneously
• 6 kV lightning protection guards the switch and connected devices against surge damage in outdoor installations
• The compact design fits a waterproof outdoor enclosure, making it suitable for road, park, and campus surveillance infrastructure

Technical Specifications

• Ports: 5 × 10/100/1000 Base-T Ethernet
• PoE OUT Ports: 4 (ports 1–4), IEEE 802.3af
• PoE IN Port: 1 (port 5), IEEE 802.3af/at
• Max Total PoE Output: 30 W
• Single Port PoE Budget: 15.4 W (AF)
• Switching Capacity: 10 Gbps
• Packet Forwarding Rate: 7.44 Mpps
• Buffer: 1 Mb
• MAC Address Table: 2K
• Jumbo Frame: 9K
• Cable: CAT5/5e UTP or higher recommended
• Network Standards: IEEE 802.3, 802.3u, 802.3x, 802.3ab, 802.3af, 802.3at
• LED Indicators: 1 × Power, 4 × PoE, 5 × Link/Act
• Operating Temperature: 0–45°C
• Storage Temperature: -40–70°C
• Operating Humidity: 10%–90% non-condensing
• Storage Humidity: 5%–90% non-condensing
• Certifications: FCC, RoHS

Why You'll Love It

• Plug-and-play operation with no software configuration needed — simply connect the PoE IN cable and the switch is ready to power and connect downstream devices
• Auto MDI/MDIX on all ports eliminates the need for crossover cables and simplifies wiring at the installation point
• Full-duplex flow control and half-duplex back-pressure prevent frame loss under traffic bursts, maintaining stable video feeds
• The waterproof-enclosure-compatible form factor reduces total installation cost by removing the need for indoor equipment housing