This A60 LED bulb combines a 12 W LED light source with a built-in microwave motion sensor in a standard E27 fitting. Unlike passive infrared sensors, the microwave detector operates through walls and non-metallic obstacles, providing 360° detection day and night without requiring line-of-sight to the movement source. It is designed for installation heights of 2–3.5 m.

The bulb has an aluminum body with a plastic coating and delivers 1200 lumens of warm white light at 3000 K with a 220° beam angle. Once motion is detected, the bulb stays on for approximately 100 seconds. The timer does not reset if movement continues within the detection zone — it runs to completion before restarting on the next detection event.

Key Features

• Integrated microwave motion sensor, 360° detection angle, day and night operation
• Detection range: up to 5 m
• Recommended installation height: 2 m – 3.5 m
• Time delay: approximately 100 seconds (timer does not reset on continued motion)
• Warm white light: 3000 K, 1200 lumens
• 220° beam angle
• Aluminum body with plastic coating
• E27 base, 230 V supply
• Dimensions: L 118 mm × D 60 mm
• Ra >80, Df >0.5

Product Benefits

• Microwave technology detects motion through non-metallic partitions, making it effective in spaces where PIR sensors would miss movement around corners or behind thin walls
• 360° day-and-night detection eliminates the directional blind spots common with PIR-based bulbs
• The standard E27 socket means no rewiring — the bulb replaces an existing E27 lamp directly
• The fixed 100-second timer prevents the light from cycling rapidly on and off in active areas, extending LED lifetime
• 1200 lm output at 12 W delivers adequate illumination for staircases, corridors, and outdoor porches without a separate fixture upgrade

Technical Specifications

• Base: E27
• Power: 12 W
• Supply Voltage: 230 V
• Luminous Flux: 1200 lm
• Colour Temperature: 3000 K (Warm White)
• Beam Angle: 220°
• CRI (Ra): >80
• Df: >0.5
• Sensor Type: Microwave motion detector
• Detection Angle: 360°
• Detection Range: Up to 5 m
• Installation Height: 2 m – 3.5 m
• Time Delay: Approximately 100 seconds
• Body Material: Aluminum with plastic coating
• Dimensions: L 118 mm × D 60 mm

Why You'll Love It

• The all-in-one sensor-and-bulb design requires no separate sensor unit, junction box, or control wiring — just screw in and use
• Suitable for both indoor and outdoor installations where a covered E27 fitting is used, extending automatic lighting to more locations
• The 100-second off-delay is long enough to avoid the light cutting out mid-task, yet short enough to avoid wasted energy when the area is empty
• Warm white 3000 K output is comfortable for residential corridors, stairwells, and entrance areas