The Marmitek MegaView 141 UHD provides a straightforward way to send an HDMI or DVI signal from a source device to a display in another location, using a single CAT5e/6 Ethernet cable instead of a long HDMI run. It reaches up to 40 metres at 4K60Hz and up to 70 metres at 1080p, without compression.

The built-in infrared return channel and CEC support allow you to control the connected source — Blu-ray player, decoder, media PC — from the remote display location using either the original remote control or the Consumer Electronics Control function. Power over Cable technology means only the transmitter requires a power adapter; the receiver draws power through the CAT5e/6 cable. Note: the MegaView 141 UHD must not be connected to an existing home LAN network.

Key Features

• Extends HDMI over a single CAT5e/6 cable: max. 40 m at 4K60Hz, max. 70 m at 1080p
• HDBaseT data transmission technology
• Supports 4K (4096x2160)@60Hz and 1080p@60Hz; 3D at 1080p@24Hz and 720p@60Hz
• HDMI 2.0b with CEC, EDID, DVI, all 3D formats and Deep Color 36-bit
• HDCP 2.2 and HDCP 1.4 for protected 4K Ultra HD content
• Power over Cable (PoC) — receiver needs no separate power socket
• Infrared return channel: IR receiver (30–60 kHz, ±6 m range, 150 cm cable) and IR blaster cable (30–60 kHz, ±1 m range, 100 cm cable)
• RS-232 Euroblock/Phoenix connector for integration with control systems

Product Benefits

• CAT5e/6 cable is far cheaper and easier to route through walls than a long HDMI cable, making installation in a second room practical and cost-effective
• HDBaseT transmission carries video, audio, IR control and power over one cable, eliminating the need for separate IR extension or power runs to the receiver
• 10.2 Gbps video bandwidth and 340 MHz clock frequency support the full 4K resolution without compression artefacts
• HDCP 2.2 compliance ensures protected 4K Ultra HD content from streaming services and Ultra HD Blu-ray plays correctly at the remote display
• The RS-232 port allows the extender to be integrated into professionally installed AV control systems

Technical Specifications

• Data Transmission: HDBaseT
• Video Resolution: 4K (4096x2160)@60Hz and 1080p@60Hz
• 3D Formats: 1080p@24Hz and 720p@60Hz
• HDMI Standard: HDMI 2.0b, CEC, EDID, DVI, all 3D formats and Deep Color 36-bit
• HDCP Standards: HDCP 2.2 and HDCP 1.4
• Colour Formats: RGB and YCbCr 4:2:0
• Colour Depth: 36-bit
• Video Bandwidth: 10.2 Gbps
• Clock Frequency: 340 MHz
• Audio Formats: DTS-HD Master Audio, Dolby TrueHD, Dolby Digital/AC3, DTS 5.1 and PCM stereo
• Transmitter AV Input: 1 x HDMI input
• Receiver AV Output: 1 x HDMI output
• UTP/CATx Connection: RJ45, EIA/TIA T568B (transmitter and receiver)
• CAT5e/6 Cable Length: max. 40 m at 4K60Hz and 70 m at 1080p
• HDMI Cable Length: max. 15 metres
• RS-232: Euroblock/Phoenix connector
• IR Receiver Frequency Range: 30–60 kHz
• IR Reception Range: ±6 metres
• IR Receiver Cable Length: 150 cm (3.5 mm jack)
• IR Blaster Frequency Range: 30–60 kHz
• IR Transmission Range: ±1 metre
• IR Blaster Cable Length: 100 cm (3.5 mm jack)
• Power Supply: 100–240 VAC 50/60Hz, 5 VDC 1 A
• Power Technology: Power over Cable (PoC)
• Box Contents: 1x Ultra HD transmitter, 1x Ultra HD receiver, 1x IR receiver cable, 1x IR extension cable with blaster LED, 1x Power Adapter, 1x mounting material, 1x User Manual

Why You'll Love It

• A single CAT5e/6 cable carries video, audio, IR control and power to the receiver — no separate runs needed for any of these functions
• PoC means the receiver near the remote TV requires no power outlet, simplifying wall-mounting or concealed installation
• The included IR receiver and blaster cables let you operate the source device from the remote room using your existing remote control
• The RJ45/T568B interface is compatible with standard Cat5e/6 patch panels and structured cabling, making it easy to integrate into an existing network cabinet