The GBC 14.1700.55 is a 5-metre professional audio cable terminated with a 6.3mm mono plug at each end. It is built for signal routing between professional audio equipment — mixers, amplifiers, and microphones — wherever a mono jack connection is needed at both ends of the run.

The cable features a double shielding construction with a 32×0.10 mm² CCS braided layer and an aluminium foil shield. Gold-plated black metal connectors at both ends ensure low contact resistance and corrosion resistance for consistent signal quality across the 5-metre length.

Key Features

• 6.3mm mono plug to 6.3mm mono plug configuration
• 5-metre cable length
• Double shielding: 32×0.10 mm² CCS braid plus aluminium foil
• Gold-plated black metal connectors at both ends
• Conductor section: 20×0.10 mm²
• External diameter: 5.5 mm

Product Benefits

• The CCS braid and aluminium foil double shielding minimises electromagnetic and radio-frequency interference between connected audio devices over the 5-metre run
• Gold-plated connectors on both plugs resist oxidation and maintain consistent, low-resistance contact after many connection cycles
• The 5-metre length bridges typical mixer-to-amplifier or microphone-to-device distances in live and studio setups without excess cable
• The 5.5 mm external diameter keeps the cable flexible and easy to route between equipment racks or desk positions

Technical Specifications

• Model: GBC 14.1700.55
• Cable Type: Professional microphone audio cable
• Connector A: 6.3mm mono plug
• Connector B: 6.3mm mono plug
• Cable Length: 5 m
• External Diameter: 5.5 mm
• Shielding: Double — 32×0.10 mm² CCS + aluminium foil
• Conductor Section: 20×0.10 mm²
• Connector Finish: Black metal, gold plated

Why You'll Love It

• The same connector at both ends makes this cable interchangeable — either plug can go into either device, simplifying setup in live and studio environments
• Double shielding keeps audio clean between mixers, amplifiers, and microphones even in electrically noisy venues
• Gold-plated contacts on both plugs mean no separate adapters are needed and oxidation does not degrade connection quality over time