Collection: Glass & Cartridge Fuses

Measure the glass body or read the markings on the old fuse. The most common sizes are 5x20mm and 6x30mm. Match both the dimensions and the printed current/voltage rating exactly. See related protection in Fuses & Electrical Protection.

Fast-blow (F) fuses react almost instantly and protect sensitive electronics. Slow-blow (T) fuses tolerate brief startup surges from motors and transformers before tripping. Use the type your device specifies. For motor circuits an MCB may be a better fit.

No. A higher-rated fuse lets through more current than the circuit is designed for, which can cause overheating or fire. Always use the exact rating. Browse the full Fuses & Electrical Protection range to find the correct value.

Repeated blowing usually means a real fault: a short circuit, an overloaded device, or the wrong fuse type. Investigate the device before replacing again. For frequent nuisance trips on motor loads consider a slow-blow fuse or an MCB.

Yes, glass and cartridge fuses are standard in power supplies for televisions, amplifiers and receivers. If you are repairing such gear, check the chassis or service label for the exact rating. See related products in TV & Audio.

Look for a broken or burnt filament inside the glass, or use a multimeter on continuity mode: a good fuse shows near-zero resistance, a blown one shows no continuity. A ceramic cartridge fuse can't be inspected visually, so always test with a meter.

Yes. Orders over €80 ship free, with fast delivery across Greece. Smaller orders carry a standard charge shown at checkout. See full details on our shipping page.

Fuses are sacrificial components, but every order is covered by Lynk Buyer Protection against items that arrive faulty or not as described. See our warranty page for how to raise a claim.