{"title":"TV Antenna Amplifiers","description":"\u003cp\u003eBrowse our complete range of tv antenna amplifiers at Lynk.gr. Choose from indoor and mast-mounted TV antenna amplifiers and headend amplifiers sourced from leading brands, with fast delivery and certified quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFree shipping across Greece on orders over €80.\u003c\/strong\u003e\u003c\/p\u003e","products":[{"product_id":"johansson-kit-7316-2430-web-amplifier","title":"Johansson KIT 7316\/2430 UHF Mast-Head Amplifier – 25-40 dB Gain, GSM\/LTE Trap \u0026 24 V PSU","description":"\u003cp\u003eThe Johansson KIT 7316\/2430 is a UHF web amplifier built for mast-head installation. It is housed in a protective box that insulates the amplifier circuit and guards against moisture ingress, extending service life in exposed outdoor positions.\u003c\/p\u003e\u003cp\u003eThe kit includes a 24 V power supply with two outputs and the amplifier itself features a potentiometer for field-adjustable gain between 25 and 40 dB. A built-in GSM\/LTE trap reduces interference from mobile frequencies before the signal enters the distribution network.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 UHF input covering 470–862 MHz\u003c\/li\u003e\n\u003cli\u003eAdjustable gain: 25–40 dB, set via on-board potentiometer\u003c\/li\u003e\n\u003cli\u003eBuilt-in GSM\/LTE trap to reject mobile interference\u003c\/li\u003e\n\u003cli\u003eProtective weatherproof box for moisture insulation\u003c\/li\u003e\n\u003cli\u003e2-output 24 V power supply included in the kit\u003c\/li\u003e\n\u003cli\u003eLow noise figure: 2.5 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eField-adjustable gain (25–40 dB) lets the installer match amplification to the actual signal level at the mast head, avoiding over-amplification distortion\u003c\/li\u003e\n\u003cli\u003eThe GSM\/LTE trap removes interference from adjacent mobile bands before amplification, protecting downstream tuners from overload\u003c\/li\u003e\n\u003cli\u003eThe protective enclosure keeps the amplifier circuit dry and insulated at the mast head — no separate weatherproofing enclosure is needed\u003c\/li\u003e\n\u003cli\u003e2.5 dB noise figure minimises the noise added to the received signal, preserving signal quality for distribution\u003c\/li\u003e\n\u003cli\u003eMaximum output level of 105 dBmV supports multi-outlet distribution without the signal degrading below usable levels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Web\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 470 – 862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 25 – 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 2.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e 105 dBmV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGSM\/LTE Trap:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 65 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 24 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 7316\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 2073160900013\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEverything needed for installation arrives in one kit — amplifier in protective box, 24 V power supply, and manual\u003c\/li\u003e\n\u003cli\u003eThe potentiometer allows gain adjustment without tools beyond a screwdriver, making on-site tuning straightforward\u003c\/li\u003e\n\u003cli\u003eThe 2-output power supply feeds two distribution points from a single unit, reducing wiring complexity\u003c\/li\u003e\n\u003cli\u003e65 mA current consumption keeps running costs low over the amplifier's operational lifetime\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563337068926,"sku":"203103","price":26.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671307043198.webp?v=1779626590"},{"product_id":"johansson-kit-7422-2430-web-amplifier","title":"Johansson KIT 7422\/2430 VHF-UHF Mast-Head Amplifier – 3 Inputs, 40 dB Gain \u0026 24 V PSU","description":"\u003cp\u003eThe Johansson KIT 7422\/2430 is a mast-head web amplifier for VHF and UHF television signals. It accepts 3 VHF-UHF inputs and is enclosed in a protective box that insulates the amplifier electronics and shields against moisture, making it appropriate for outdoor or rooftop antenna installations.\u003c\/p\u003e\u003cp\u003eGain is adjustable via a potentiometer, reaching up to 40 dB on the UHF band. The unit is powered by the included 24 V power supply, which also provides 2 outputs for signal distribution.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3 VHF-UHF inputs\u003c\/li\u003e\n\u003cli\u003eFrequency range: 170–230 MHz (VHF) \/ 470–862 MHz (UHF)\u003c\/li\u003e\n\u003cli\u003eAdjustable gain via potentiometer: 10–30 dB (VHF) \/ 25–40 dB (UHF)\u003c\/li\u003e\n\u003cli\u003eNoise figure: 3.5 dB\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 105 dBmV\u003c\/li\u003e\n\u003cli\u003eNo GSM\/LTE trap\u003c\/li\u003e\n\u003cli\u003eHoused in a protective weatherproof box\u003c\/li\u003e\n\u003cli\u003e24 V power supply with 2 outputs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAdjustable gain allows the amplifier to be tuned to the signal conditions at the installation site rather than applying a fixed gain that may cause overload\u003c\/li\u003e\n\u003cli\u003eWeatherproof protective box keeps moisture away from the amplifier circuits, extending service life in outdoor environments\u003c\/li\u003e\n\u003cli\u003e3 separate inputs allow combining signals from multiple antennas or directional sources before amplification\u003c\/li\u003e\n\u003cli\u003e105 dBmV maximum output level accommodates distribution to several receivers without signal degradation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson KIT 7422\/2430\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e VHF-UHF Web Amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e VHF-UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 170–230 MHz \/ 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 10–30 dB (VHF) \/ 25–40 dB (UHF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 3.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e 105 dBmV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGSM\/LTE Trap:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 75 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 24 V\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePotentiometer-controlled gain means you can fine-tune signal levels without swapping fixed-gain modules\u003c\/li\u003e\n\u003cli\u003eThe weatherproof enclosure removes the need for a separate outdoor housing or cabinet\u003c\/li\u003e\n\u003cli\u003e2 power supply outputs simplify installation where the amplifier and power injector are located at different points\u003c\/li\u003e\n\u003cli\u003e3 dB noise figure is low enough to preserve weak signal quality from distant transmitters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563339985278,"sku":"203112","price":38.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671308288382.webp?v=1779626598"},{"product_id":"johansson-6630-super-profiler","title":"Johansson 6630 Super Profiler SMATV Headend – 4 UHF Inputs, DVB-T \u0026 \u003e120 dBμV Output","description":"\u003cp\u003eThe Johansson 6630 Super Profiler is a professional multi-channel filter-amplifier and frequency converter for SMATV and MATV headend installations. It receives up to four UHF channels plus VHF\/FM\/DAB inputs, applies highly selective SAW filtering, and outputs two independently programmable UHF RF signals at high output level — making it the core processing engine of any Johansson 65xx headend system.\u003c\/p\u003e\n\u003cp\u003eThe 6630 supports both analogue and DVB-T (COFDM) signal standards and is configurable via the Johansson 6565 Control Unit or the 6554 PC-to-Coax module — no additional tools required for commissioning or adjustments in the field.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4 × UHF inputs (470–862 MHz) plus VHF BI\/BIII, FM, and DAB inputs (47–240 MHz)\u003c\/li\u003e\n  \u003cli\u003e2 × fully programmable UHF outputs plus a –30 dB test output\u003c\/li\u003e\n  \u003cli\u003e8 UHF filter clusters — adjustable bandwidth of 1 to 7 channels (8–56 MHz)\u003c\/li\u003e\n  \u003cli\u003eSuper-selective single-channel filters: 30 dB attenuation at 1 MHz offset\u003c\/li\u003e\n  \u003cli\u003eMaximum output level exceeding 120 dBμV\u003c\/li\u003e\n  \u003cli\u003eSupports analogue and DVB-T (COFDM) signal processing\u003c\/li\u003e\n  \u003cli\u003eProgrammable via Johansson 6565 Control Unit or 6554 PC-to-Coax module\u003c\/li\u003e\n  \u003cli\u003eUltra-reliable detachable power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAll-in-one UHF + VHF + FM + DAB processing in a single compact unit\u003c\/li\u003e\n  \u003cli\u003eHigh output level ensures excellent signal margin for large distribution networks\u003c\/li\u003e\n  \u003cli\u003eFine-grained level adjustment (±10 dB per UHF input) for perfect output equalization\u003c\/li\u003e\n  \u003cli\u003eScalable — combine multiple 6630 units or pair with 65xx active combiners\u003c\/li\u003e\n  \u003cli\u003eField-configurable without a PC using the optional 6565 control unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF Inputs:\u003c\/strong\u003e 4 × F-type, 470–862 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVHF\/FM\/DAB Inputs:\u003c\/strong\u003e BI (47–68 MHz), FM (88–108 MHz), BIII\/DAB (174–240 MHz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2 × programmable F-type UHF + 1 × test output (–30 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilter Clusters:\u003c\/strong\u003e 8 UHF clusters, 1–7 channel bandwidth (8–56 MHz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle-Channel Filter Selectivity:\u003c\/strong\u003e 30 dB @ ±1 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e \u0026gt;120 dBμV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLevel Adjustment:\u003c\/strong\u003e ±10 dB per UHF input\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal Standards:\u003c\/strong\u003e Analogue, DVB-T (COFDM)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProgramming:\u003c\/strong\u003e Via Johansson 6565 control unit or 6554 PC-to-coax module\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Detachable (mains)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eSwedish engineering for demanding professional TV distribution installations — high output, superb selectivity, and multi-standard support make the 6630 Super Profiler the go-to headend processor for large SMATV\/MATV networks.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563340837246,"sku":"203406","price":659.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671308681598.webp?v=1779626615"},{"product_id":"fracarro-as20","title":"Fracarro AS20 SAT Line Amplifier – 950-2150 MHz, 20 dB Gain \u0026 120 dB Max Output","description":"\u003cp\u003eThe Fracarro AS20 is a satellite-band line amplifier designed to compensate for cable losses in long coaxial runs between an LNB and a satellite receiver or distribution system. It operates across the full 950–2150 MHz satellite IF band and delivers 20 dB of gain.\u003c\/p\u003e\n\u003cp\u003eIts maximum output level of 120 dB makes it suited to installations where signal headroom is needed before a splitter or multi-room distribution point.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eType: line amplifier (in-line installation)\u003c\/li\u003e\n\u003cli\u003eFrequency range: 950–2150 MHz (satellite IF band)\u003c\/li\u003e\n\u003cli\u003eGain: 20 dB\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 120 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e20 dB gain recovers signal lost over long cable runs, restoring levels to within receiver specification\u003c\/li\u003e\n\u003cli\u003eFull 950–2150 MHz coverage ensures all satellite polarisations and frequency bands are amplified equally\u003c\/li\u003e\n\u003cli\u003eMaximum output level of 120 dB provides sufficient headroom to feed splitters or multiple receivers after amplification\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Fracarro AS20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e SAT line amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum output level:\u003c\/strong\u003e 120 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eIn-line form factor installs directly into any coaxial run without enclosures or additional hardware\u003c\/li\u003e\n\u003cli\u003eDedicated SAT-band amplification avoids the noise and intermodulation products that a broadband amplifier would introduce on unused frequencies\u003c\/li\u003e\n\u003cli\u003eFracarro's build quality ensures consistent gain figures over extended operating periods\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fracarro","offers":[{"title":"Default Title","offer_id":56563637092734,"sku":"284013","price":20.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671356031358.webp?v=1779627201"},{"product_id":"fracarro-as10","title":"Fracarro AS10 SAT Line Amplifier – 950-2150 MHz, 12 dB Gain \u0026 110 dBµV Max Output","description":"\u003cp\u003eThe Fracarro AS10 is a satellite line amplifier designed to boost weak SAT signals along the distribution line between a satellite dish and connected receivers. It operates across the full 950–2150 MHz frequency range used by satellite IF signals, making it suitable for single-cable and standard coaxial satellite installations.\u003c\/p\u003e\u003cp\u003eWith a gain of 12 dB and a maximum output level of 110 dB, the AS10 compensates for cable losses in longer runs, ensuring that each connected receiver receives a sufficient signal level.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLine-type satellite amplifier\u003c\/li\u003e\n\u003cli\u003eFrequency range: 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003eGain: 12 dB\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 110 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e12 dB gain recovers signal lost over long cable runs between dish and receiver\u003c\/li\u003e\n\u003cli\u003eFull 950–2150 MHz coverage spans the entire satellite IF band, supporting all standard LNB outputs\u003c\/li\u003e\n\u003cli\u003eMaximum output level of 110 dB supports distribution to multiple receivers without signal degradation at each point\u003c\/li\u003e\n\u003cli\u003eLine-type format slots directly into the coaxial run — no separate housing or mounting required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Line amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApplication:\u003c\/strong\u003e SAT (satellite)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 12 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e 110 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eStraightforward inline installation — no tools beyond a coaxial connector needed\u003c\/li\u003e\n\u003cli\u003eCovers the complete satellite IF band so there is no need to verify frequency compatibility with your LNB\u003c\/li\u003e\n\u003cli\u003eFracarro is a well-established Italian brand in signal distribution, trusted by professional installers\u003c\/li\u003e\n\u003cli\u003eCompact form factor means it can be placed close to the dish head or at any intermediate point in the cable run\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fracarro","offers":[{"title":"Default Title","offer_id":56563707871614,"sku":"289253","price":18.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671376150910.webp?v=1779627540"},{"product_id":"johansson-6520-4-if-channel-processor","title":"Johansson 6520 4-Channel IF Processor – 470-862 MHz UHF, 40 dB Gain \u0026 SAW Filtering","description":"\u003cp\u003eThe Johansson 6520 is a professional 4-channel IF processor designed for SMATV and MATV headend installations. It receives four terrestrial DVB-T UHF channels and re-transmits each to a selectable output frequency, enabling precise channel allocation across a building or campus distribution network.\u003c\/p\u003e\n\u003cp\u003eThe 6520 operates as a standalone unit or can be combined with other Johansson 65xx series modules — such as the Super Profiler or Profiler Plus — to build a complete, scalable headend system.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4 independent IF input channels with super-selective SAW filters\u003c\/li\u003e\n  \u003cli\u003eFrequency range: 470–862 MHz (full UHF band)\u003c\/li\u003e\n  \u003cli\u003eDVB-T signal standard supported\u003c\/li\u003e\n  \u003cli\u003eAuto-scan: automatically detects all digital channels present\u003c\/li\u003e\n  \u003cli\u003eIndependent gain adjustment per channel via programming unit\u003c\/li\u003e\n  \u003cli\u003eCompact zamak die-cast housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eProfessional-grade channel isolation with 40 dB SAW filter attenuation\u003c\/li\u003e\n  \u003cli\u003eFlexible output frequency assignment across the UHF band\u003c\/li\u003e\n  \u003cli\u003eEasy level equalization — manual or automatic\u003c\/li\u003e\n  \u003cli\u003eStackable and combinable with other Johansson 65xx modules\u003c\/li\u003e\n  \u003cli\u003eEconomical alternative to a full headend for mid-size installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 × UHF (terrestrial DVB-T)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 × combined F-type output\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 470–862 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e up to 40 dB per channel\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e 113 dBμV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal Standards:\u003c\/strong\u003e DVB-T\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilter Type:\u003c\/strong\u003e Super-selective SAW (40 dB attenuation at ±1.25 MHz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProgramming:\u003c\/strong\u003e Via external Johansson control unit over coaxial cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eSwedish engineering for demanding professional TV distribution installations — compact, reliable, and designed to integrate seamlessly into existing Johansson 65xx headend systems.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563768820094,"sku":"203408","price":489.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671404790142.webp?v=1779627599"},{"product_id":"fracarro-map313-mast-amplifier","title":"Fracarro MAP313 Mast Amplifier 3-In – 1×VHF + 2×UHF, 24\/30 dB \u0026 FM Filter","description":"\u003cp\u003eThe Fracarro MAP313 is a three-input mast amplifier with a fully shielded metal chassis and F female connectors. It amplifies and mixes signals from separate VHF and UHF aerials, making it ideal for small and medium-sized terrestrial TV installations where antennas for different bands are mounted on the same mast.\u003c\/p\u003e\n\u003cp\u003eIts innovative plastic housing locks the cover in place and allows the case to be rotated for easy alignment during installation. An adjustable plastic strap enables mast mounting on masts up to 60 mm in diameter. The unit requires an external power supply (PSU412 not included).\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThree inputs: 1 × VHF (47–230 MHz) and 2 × UHF (470–862 MHz)\u003c\/li\u003e\n\u003cli\u003eVHF input gain: 24 dB; UHF input gain: 30 dB (each UHF input)\u003c\/li\u003e\n\u003cli\u003eGain adjustment: 15 dB on all inputs\u003c\/li\u003e\n\u003cli\u003eLow noise figure: 5 dB (VHF), 8 dB (UHF)\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 108 dBμV (IM3 -60 dBc, 3 tones); 115 dBμV (IM3 -35 dBc, 2 tones, DTT only)\u003c\/li\u003e\n\u003cli\u003eFM band on VHF input can be filtered via jumper\u003c\/li\u003e\n\u003cli\u003eFully shielded metal chassis with F female connectors\u003c\/li\u003e\n\u003cli\u003eAdjustable plastic strap for mast mounting up to Ø 60 mm\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 12 V; current consumption: 80 mA\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eCombining VHF and UHF signals at the mast reduces cable runs and avoids signal loss from passive splitters at the distribution point\u003c\/li\u003e\n\u003cli\u003e15 dB gain adjustment on every input allows fine-tuning for installations where signal levels from different aerials are unequal\u003c\/li\u003e\n\u003cli\u003eFM filter jumper prevents FM radio signals from overloading the VHF amplifier stage in high-FM areas\u003c\/li\u003e\n\u003cli\u003eFull shielding minimises interference from nearby mobile or LTE signals\u003c\/li\u003e\n\u003cli\u003eRotating case and strap mounting make single-person installation on a mast straightforward\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 3 (1 × VHF, 2 × UHF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF bandwidth:\u003c\/strong\u003e 47–230 MHz (FM band filterable via jumper)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF gain:\u003c\/strong\u003e 24 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF gain adjustment:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF noise figure:\u003c\/strong\u003e 5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF max output (IM3 -60 dBc, 3 tones):\u003c\/strong\u003e 108 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF max output (IM3 -35 dBc, 2 tones, DTT):\u003c\/strong\u003e 115 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF bandwidth (inputs 2 and 3):\u003c\/strong\u003e 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF gain (each input):\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF gain adjustment:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF noise figure:\u003c\/strong\u003e 8 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF max output (IM3 -60 dBc, 3 tones):\u003c\/strong\u003e 108 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF max output (IM3 -35 dBc, 2 tones, DTT):\u003c\/strong\u003e 115 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage:\u003c\/strong\u003e 12 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e 80 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type:\u003c\/strong\u003e F female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMast diameter:\u003c\/strong\u003e Up to Ø 60 mm (adjustable plastic strap)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 × MAP313, 1 × plastic strap, 1 × instruction manual\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNote:\u003c\/strong\u003e Power supply PSU412 not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMast-mounting the amplifier right at the aerials maximises signal quality before it travels down the cable\u003c\/li\u003e\n\u003cli\u003eThe rotating case and strap mean no special tools or brackets are needed for mast installation\u003c\/li\u003e\n\u003cli\u003e30 dB UHF gain with a low noise figure is well-suited to areas with weak terrestrial digital signals\u003c\/li\u003e\n\u003cli\u003eThe FM jumper filter saves you from having to add a separate FM trap in the signal path\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fracarro","offers":[{"title":"Default Title","offer_id":56563803816318,"sku":"F223152","price":34.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671430021502.webp?v=1779627715"},{"product_id":"johansson-9674l-tv-sat-line-amplifier-lte-4g","title":"Johansson 9674L TV-SAT Line Amplifier – 1 In 4 Out, LTE\/4G Filter \u0026 85-240 V Mains","description":"\u003cp\u003eThe Johansson 9674L is a combined TV and satellite line amplifier designed for residential and small installation use. It accepts a single input carrying both terrestrial TV (47–790 MHz) and satellite IF signals (950–2150 MHz), amplifies both bands, and distributes the amplified signal to four outputs. The built-in LTE\/4G filter blocks interference from 4G mobile signals before they reach connected televisions or satellite receivers.\u003c\/p\u003e\u003cp\u003eTerrestrial gain is adjustable from 0 to 18 dB, while satellite gain is adjustable from 2 to 22 dB, with a fixed 8 dB slope on the satellite band for cable compensation. DC power pass to the LNB is switchable, and the unit accepts universal mains voltage from 85 to 240 V AC.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input \/ 4 outputs for distributing one aerial\/satellite feed to four TV points.\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/4G filter removes interference from 4G mobile networks.\u003c\/li\u003e\n\u003cli\u003eAdjustable gain: 0–18 dB (terrestrial) and 2–22 dB (satellite).\u003c\/li\u003e\n\u003cli\u003eFixed 8 dB slope on the satellite band for cable loss compensation.\u003c\/li\u003e\n\u003cli\u003eSwitchable DC power pass (output to input) for powering an LNB.\u003c\/li\u003e\n\u003cli\u003eUniversal mains input: 85–240 V AC.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne amplifier feeds four TV or satellite points — replaces a passive splitter that reduces signal level.\u003c\/li\u003e\n\u003cli\u003eThe LTE\/4G filter prevents picture breakup caused by local 4G transmitters.\u003c\/li\u003e\n\u003cli\u003eAdjustable gain compensates for different cable lengths or signal conditions at the installation site.\u003c\/li\u003e\n\u003cli\u003eSwitchable DC pass allows the amplifier to power a satellite LNB through the coaxial cable without a separate power supply.\u003c\/li\u003e\n\u003cli\u003eUniversal mains input makes it suitable across European voltage standards without adaptation.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 9674L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs\/Outputs:\u003c\/strong\u003e 1 input \/ 4 outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 47–790 MHz (terrestrial) \/ 950–2150 MHz (satellite)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e Terrestrial: 0–18 dB; Satellite: 2–22 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope:\u003c\/strong\u003e 8 dB, fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e Terrestrial: 4 dB; Satellite: 7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e 103 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Pass (Out to In):\u003c\/strong\u003e Switchable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC Input Power\/Frequency\/Consumption:\u003c\/strong\u003e 85–240 VAC \/ 50–60 Hz \/ 3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox Contents:\u003c\/strong\u003e 1× Johansson 9674L amplifier, 1× safety instructions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePlug-and-play installation in an existing TV\/SAT distribution cabinet — no specialist tools required.\u003c\/li\u003e\n\u003cli\u003eSwitchable DC pass eliminates the need for a separate LNB power supply in many installations.\u003c\/li\u003e\n\u003cli\u003eBuilt-in 4G filter future-proofs the installation against LTE interference without adding a separate filter unit.\u003c\/li\u003e\n\u003cli\u003eUniversal mains input removes the need for voltage adapters when deploying across different supply conditions.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563902480766,"sku":"203216","price":43.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671450206590.webp?v=1779628022"},{"product_id":"johansson-6710-profino-revolution","title":"Johansson 6710 Profino Revolution Programmable Filter-Amplifier – 20 Channels, LTE\/4G\/5G","description":"\u003cp\u003eThe Johansson 6710 Profino Revolution is a professional programmable filter-amplifier designed for medium-sized MATV and SMATV installations. Where the Profiler Revolution 6700 handles four VHF\/UHF inputs and up to 50+ channels, the Profino 6710 is optimised for up to 20 channels across two UHF inputs, one VHF\/DAB input, and one FM input — making it the right-sized, cost-effective solution for smaller hotels, apartment blocks, and residential complexes.\u003c\/p\u003e\n\u003cp\u003eThe 6710 shares the same compact 217 × 165 × 59 mm housing and automatic LTE\/4G\/5G protection as the full Profiler Revolution series, and is equally configurable via the Johansson 6565 Control Unit or 6554 PC-to-Coax module.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e2 × UHF inputs (470–862 MHz) + 1 × DAB\/VHF input (174–240 MHz) + 1 × FM input (88–108 MHz)\u003c\/li\u003e\n  \u003cli\u003e1 × combined main output (FM + DAB\/VHF + UHF) + 1 × test port (–30 dB)\u003c\/li\u003e\n  \u003cli\u003eProcesses up to 20 channels with ultra-selective filters (50 dB on adjacent channels)\u003c\/li\u003e\n  \u003cli\u003eGain: 35 dB (FM), \u0026gt;60 dB (VHF\/UHF)\u003c\/li\u003e\n  \u003cli\u003eMax output level: 115 dBμV (VHF\/UHF, 60 dB IM3)\u003c\/li\u003e\n  \u003cli\u003eOutput MER: 35 dB (VHF\/UHF)\u003c\/li\u003e\n  \u003cli\u003eAutomatic LTE\/4G\/5G filter — selectable at 694 MHz, 790 MHz, or OFF\u003c\/li\u003e\n  \u003cli\u003eNoise figure: 7 dB (VHF\/UHF)\u003c\/li\u003e\n  \u003cli\u003eUniversal 100–240V AC power supply, only 12W consumption\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eRight-sized for medium installations — fewer channels, lower cost, same Profiler technology\u003c\/li\u003e\n  \u003cli\u003eIdentical housing to the 6700\/6701\/6702 — easy to mix and match in a headend rack\u003c\/li\u003e\n  \u003cli\u003eTwo selectable LTE cut-off frequencies (694 or 790 MHz) for maximum flexibility\u003c\/li\u003e\n  \u003cli\u003eLowest power consumption in the Profiler\/Profino family at just 12W\u003c\/li\u003e\n  \u003cli\u003eRemote antenna preamplifier power included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 × UHF (470–862 MHz) + 1 × DAB\/VHF (174–240 MHz) + 1 × FM (88–108 MHz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 1 × FM+DAB\/VHF+UHF F-type + 1 × test port (–30 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 35 dB (FM), \u0026gt;60 dB (VHF\/UHF)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e 115 dBμV (60 dB IM3, VHF\/UHF) \/ 113 dBμV (FM)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput MER:\u003c\/strong\u003e 35 dB\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilter Selectivity:\u003c\/strong\u003e 50 dB (adjacent channel), 35 dB\/1 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 7 dB (VHF\/UHF)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eChannel Capacity:\u003c\/strong\u003e Up to 20 channels\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLTE Filter:\u003c\/strong\u003e Automatic, 694 MHz or 790 MHz selectable\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 100–240V AC, 12W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 217 × 165 × 59 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 5404041101248\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eSwedish engineering for demanding professional TV distribution installations — the 6710 Profino Revolution brings Profiler-class filtering technology to medium installations where the full 6700 would be oversized, offering the perfect balance of performance, capacity, and cost.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563959300478,"sku":"203411","price":195.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671462986110.webp?v=1779628212"},{"product_id":"johansson-9671l-tv-sat-line-amplifier-lte-4g","title":"Johansson 9671L TV-SAT Line Amplifier 1-In\/1-Out – LTE\/4G Filter, 7-27 dB \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 9671L is a combined TV-SAT line amplifier designed to boost both terrestrial (UHF\/VHF) and satellite IF signals on a single device. It has one input and one output, and includes a built-in LTE\/4G filter that suppresses interference from mobile networks in the 790 MHz and above band, protecting the terrestrial reception path without requiring a separate filter.\u003c\/p\u003e\u003cp\u003eGain is adjustable on the terrestrial path (7–27 dB) while the satellite path features a fixed 8 dB slope. A switchable DC power pass function allows the unit to supply voltage to upstream LNBs or other devices via the coaxial input. Power is supplied from the mains via a universal 85–240 V AC input.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input \/ 1 output configuration\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/4G filter for terrestrial path interference rejection\u003c\/li\u003e\n\u003cli\u003eAdjustable terrestrial gain: 7–27 dB\u003c\/li\u003e\n\u003cli\u003eAdjustable satellite gain: 12–32 dB\u003c\/li\u003e\n\u003cli\u003eFixed satellite slope: 8 dB\u003c\/li\u003e\n\u003cli\u003eSwitchable DC power pass (output to input)\u003c\/li\u003e\n\u003cli\u003eUniversal mains input: 85–240 V AC, 50–60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCombined TV+SAT amplification in a single unit reduces the number of devices in the installation\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/4G filter eliminates the need for a separate 4G interference filter in the signal chain\u003c\/li\u003e\n\u003cli\u003eAdjustable gain on the terrestrial path allows the amplification to be tuned to the actual received signal level\u003c\/li\u003e\n\u003cli\u003eSwitchable DC pass lets the amplifier power a connected LNB through the coaxial cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 9671L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 1 input \/ 1 output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 47–790 MHz (terrestrial) \/ 950–2400 MHz (satellite)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (terrestrial):\u003c\/strong\u003e 7–27 dB (adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (satellite):\u003c\/strong\u003e 12–32 dB (adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope:\u003c\/strong\u003e 8 dB, fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure (terrestrial):\u003c\/strong\u003e 4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure (satellite):\u003c\/strong\u003e 6 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax output level (terrestrial):\u003c\/strong\u003e 109 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax output level (satellite):\u003c\/strong\u003e 112 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input power:\u003c\/strong\u003e 85–240 VAC \/ 50–60 Hz \/ 3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC power pass (Out to In):\u003c\/strong\u003e Switchable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle-box TV+SAT solution keeps the installation tidy and the component count low\u003c\/li\u003e\n\u003cli\u003eUniversal 85–240 V input works anywhere in Europe without an adapter\u003c\/li\u003e\n\u003cli\u003eThe LTE\/4G filter is built in, so there is one less component to source and install\u003c\/li\u003e\n\u003cli\u003eAdjustable gain means the amplifier can be set correctly for the signal level at the installation point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56564146667902,"sku":"203222","price":37.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671517479294.webp?v=1779628987"},{"product_id":"johansson-9672l-tv-sat-line-amplifier-lte-4g","title":"Johansson 9672L TV-SAT Line Amplifier 1-In\/2-Out – LTE\/4G Filter, 4-24 dB \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 9672L is a combined TV-SAT line amplifier that amplifies and splits both terrestrial and satellite IF signals across one input and two outputs. A built-in LTE\/4G filter rejects mobile-network interference on the terrestrial path in the 790 MHz and above band, removing the need for a separate filter component in the installation.\u003c\/p\u003e\u003cp\u003eTerrestrial gain is adjustable over a 20 dB range (4–24 dB) and satellite gain is adjustable from 8 to 28 dB, with a fixed 8 dB slope on the satellite path. The DC power pass function is switchable, allowing upstream LNBs or other coaxial-powered devices to receive voltage via the input port. The unit operates from a universal 85–240 V AC mains supply.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input \/ 2 output configuration\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/4G filter on the terrestrial signal path\u003c\/li\u003e\n\u003cli\u003eAdjustable terrestrial gain: 4–24 dB\u003c\/li\u003e\n\u003cli\u003eAdjustable satellite gain: 8–28 dB\u003c\/li\u003e\n\u003cli\u003eFixed satellite slope: 8 dB\u003c\/li\u003e\n\u003cli\u003eSwitchable DC power pass (output to input)\u003c\/li\u003e\n\u003cli\u003eUniversal mains input: 85–240 V AC, 50–60 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDistributes the amplified TV-SAT signal to two separate outlets or receivers from one input connection\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/4G filter eliminates a separate filter component, simplifying the signal chain\u003c\/li\u003e\n\u003cli\u003eWide adjustable gain range on both paths allows fine-tuning to match the actual signal level at the tap point\u003c\/li\u003e\n\u003cli\u003eSwitchable DC pass provides coaxial power to a connected LNB when needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 9672L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 1 input \/ 2 outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 47–790 MHz (terrestrial) \/ 950–2150 MHz (satellite)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (terrestrial):\u003c\/strong\u003e 4–24 dB (adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (satellite):\u003c\/strong\u003e 8–28 dB (adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope:\u003c\/strong\u003e 8 dB, fixed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure (terrestrial):\u003c\/strong\u003e 4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure (satellite):\u003c\/strong\u003e 7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax output level:\u003c\/strong\u003e 108 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC input power:\u003c\/strong\u003e 85–240 VAC \/ 50–60 Hz \/ 3 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC power pass (Out to In):\u003c\/strong\u003e Switchable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo outputs let you serve two TV points or receivers from a single amplified connection\u003c\/li\u003e\n\u003cli\u003eNo separate 4G filter to buy or install — it is built into the amplifier\u003c\/li\u003e\n\u003cli\u003eUniversal 85–240 V AC input covers all European mains voltages\u003c\/li\u003e\n\u003cli\u003eAdjustable gain on both terrestrial and satellite paths means the amplifier suits a wide range of signal environments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56564147552638,"sku":"203223","price":39.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671517643134.webp?v=1779628992"},{"product_id":"johansson-7784-multiband-amplifier-4-inputs","title":"Johansson 7784 Multiband Amplifier – 4 Inputs FM\/DAB\/UHF, LTE Filter \u0026 23 W Output","description":"\u003cp\u003eThe Johansson 7784 is a split-band distribution amplifier designed for professional antenna systems. It accepts four distinct frequency bands simultaneously — BI\/FM, BIII\/DAB, and two independently switchable UHF inputs — each with its own gain adjustment ranging 10–35 dB. A detachable external power supply is included.\u003c\/p\u003e\u003cp\u003eThe amplifier is RED compliant and fully LTE-ready, with switchable UHF band limiting at 694 MHz or 862 MHz. A dedicated –30 dB test output allows signal monitoring without interrupting the main distribution chain. VDC remote power is selectable at OFF, 12 V or 24 V for powering downstream LNBs or masthead amplifiers.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4 inputs: BI\/FM (47–108 MHz), BIII\/DAB (174–240 MHz), UHF1 and UHF2 (470–694 or 862 MHz, switchable)\u003c\/li\u003e\n\u003cli\u003eSplit-band design with interstage attenuators and 20 dB dynamic range per band\u003c\/li\u003e\n\u003cli\u003eSeparate gain adjustment per input: 10–30 dB for BI\/FM and BIII\/DAB; 15–35 dB for UHF1\/UHF2\u003c\/li\u003e\n\u003cli\u003eSwitchable LTE filter (694 or 862 MHz cut-off)\u003c\/li\u003e\n\u003cli\u003e–30 dB monitoring test port\u003c\/li\u003e\n\u003cli\u003eVDC remote power: OFF \/ 12 V \/ 24 V switchable\u003c\/li\u003e\n\u003cli\u003eRED compliant (selectivity classes 0 and 1)\u003c\/li\u003e\n\u003cli\u003eDetachable power supply included\u003c\/li\u003e\n\u003cli\u003eCompact housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIndependent gain controls per band prevent strong signals on one input from degrading others\u003c\/li\u003e\n\u003cli\u003eHigh input power threshold makes input overload virtually impossible in demanding installations\u003c\/li\u003e\n\u003cli\u003eLTE filter switching lets the installer adapt to local spectrum allocation without hardware changes\u003c\/li\u003e\n\u003cli\u003eRemote power output eliminates the need for a separate power supply at a masthead unit\u003c\/li\u003e\n\u003cli\u003eThe test port enables level checking during commissioning without disconnecting any cables\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 7784\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 (BI\/FM, BIII\/DAB, UHF1, UHF2)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 main + 1 test port (–30 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e BI\/FM: 47–108 MHz; BIII\/DAB: 174–240 MHz; UHF1: 470–694 or 862 MHz (switchable); UHF2: 470–694 or 862 MHz (switchable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (dB):\u003c\/strong\u003e BI\/FM: 10–30; BIII\/DAB: 10–30; UHF1: 15–35; UHF2: 15–35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. input power (dBµV, –60 dBc):\u003c\/strong\u003e BI\/FM: 94; BIII\/DAB: 92; UHF1: 96; UHF2: 96\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. output power (dBµV, –60 dBc):\u003c\/strong\u003e BI\/FM: 118; BIII\/DAB: 119; UHF1: 118; UHF2: 118\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure (dB):\u003c\/strong\u003e BI\/FM: 4.5; BIII\/DAB: 4; UHF1: 5.5; UHF2: 5.5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss (dB):\u003c\/strong\u003e \u0026gt;10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest port (dB):\u003c\/strong\u003e –30\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote power (V):\u003c\/strong\u003e OFF – 12 V – 24 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC mode (mA):\u003c\/strong\u003e BIII\/DAB: 100; UHF1: 100; UHF2: 100\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRED selectivity classification:\u003c\/strong\u003e 0 and 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply voltage (VAC):\u003c\/strong\u003e 100–240\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption (W):\u003c\/strong\u003e 23\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 x Johansson 7784 amplifier, 1 x power adapter cord, 1 x instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMore efficient than its predecessor — same rack space, better performance\u003c\/li\u003e\n\u003cli\u003eCompact housing fits neatly into an existing head-end cabinet\u003c\/li\u003e\n\u003cli\u003eAll signal levels are independently tunable, so the output is balanced for every outlet in the building\u003c\/li\u003e\n\u003cli\u003eFull LTE readiness future-proofs the installation against spectrum refarming\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56564268728702,"sku":"203320","price":136.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671552049534.webp?v=1779614900"},{"product_id":"johansson-6702-profiler-revolution-sat","title":"Johansson 6702 Profiler Revolution SAT Headend – 50+ Channels, LTE\/5G Filter \u0026 1×SAT Input","description":"\u003cp\u003eThe Johansson 6702 Profiler Revolution SAT is the satellite-capable variant of the Profiler Revolution series. It adds a dedicated SAT input (950–2400 MHz) to the proven 6700\/6701 platform, enabling a single compact unit to process satellite, terrestrial, VHF, and FM signals simultaneously — and distribute them all on a single coaxial cable. The result is a true all-in-one headend for installations where both satellite and terrestrial sources need to be combined.\u003c\/p\u003e\n\u003cp\u003eLike all Profiler Revolution units, the 6702 includes built-in LTE\/4G\/5G protection, processes over 50 channels, and is fully configurable via the Johansson 6565 Control Unit or the 6554 PC-to-Coax module.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e1 × SAT input (950–2400 MHz) + 4 × VHF\/UHF inputs (470–862 MHz) + 1 × FM input (88–108 MHz)\u003c\/li\u003e\n  \u003cli\u003e1 × combined main output (SAT + FM + VHF + UHF) + 1 × test port (–30 dB)\u003c\/li\u003e\n  \u003cli\u003eProcesses over 50 channels simultaneously\u003c\/li\u003e\n  \u003cli\u003eGain: 40 dB (SAT), 35 dB (FM), \u0026gt;75 dB (VHF\/UHF)\u003c\/li\u003e\n  \u003cli\u003eMax output level: 131 dBμV (VHF\/UHF), 119 dBμV (SAT)\u003c\/li\u003e\n  \u003cli\u003eAutomatic LTE\/4G\/5G filter (694 MHz, selectable)\u003c\/li\u003e\n  \u003cli\u003eNoise figure: 8 dB (SAT), 7 dB (VHF\/UHF)\u003c\/li\u003e\n  \u003cli\u003eRemote antenna preamplifier power: 12V or 24V DC\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eSatellite + terrestrial + FM all distributed on a single coaxial cable\u003c\/li\u003e\n  \u003cli\u003eSame compact 217 × 165 × 59 mm housing as the 6700\/6701 — no extra space needed\u003c\/li\u003e\n  \u003cli\u003eEliminates need for separate SAT and terrestrial headend units\u003c\/li\u003e\n  \u003cli\u003eFlexible channel frequency conversion and remapping\u003c\/li\u003e\n  \u003cli\u003eBuilt-in LTE filter protects all inputs from 4G\/5G interference\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × SAT (950–2400 MHz) + 4 × VHF\/UHF (470–862 MHz) + 1 × FM (88–108 MHz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e 1 × SAT+FM+VHF+UHF F-type + 1 × test port (–30 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 40 dB (SAT), 35 dB (FM), \u0026gt;75 dB (VHF\/UHF)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Output Level (SAT):\u003c\/strong\u003e 119 dBμV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Output Level (VHF\/UHF):\u003c\/strong\u003e 131 dBμV (35 dB IM3) \/ 120 dBμV (60 dB IM3)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 8 dB (SAT), 7 dB (VHF\/UHF)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLTE Filter:\u003c\/strong\u003e Automatic, 694 MHz cut-off (selectable)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 100–240V AC, 15W\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 217 × 165 × 59 mm\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.8 kg\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 5404041101231\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eSwedish engineering for demanding professional TV distribution installations — the 6702 Profiler Revolution SAT is the ideal single-unit solution when satellite and terrestrial signals must be combined and distributed on one coaxial network.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56564296843646,"sku":"203412","price":287.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671563288958.webp?v=1779629515"},{"product_id":"johansson-6712-profino-revolution-sat","title":"Johansson 6712 Profino Revolution SAT Filter Amplifier – 5 Inputs, 50 dB Selectivity","description":"\u003cp\u003eThe Johansson 6712 Profino Revolution SAT is a light-version digital programmable filter amplifier and signal combiner for antenna head-end installations. It accepts five signal inputs simultaneously — one satellite (950–2400 MHz), one FM (88–108 MHz), one DAB\/VHF (174–240 MHz) and two UHF (470–862 MHz) — and processes up to 20 terrestrial and satellite channels. Adjacent-channel selectivity is 50 dB, among the sharpest filters available, ensuring neighbouring channels do not cause interference. Channel conversion is not possible in this model.\u003c\/p\u003e\u003cp\u003eEach individual multiplex receives real-time AGC, so output levels are automatically stabilised regardless of input variations. The Flex matrix allows filters from any input to be assigned freely across the output, giving complete flexibility in channel planning. The unit is made in Europe and features automatic LTE protection with selectable cut-off at 694 MHz, 790 MHz or OFF. A –30 dB test output is provided for level monitoring. Remote powering at 12 V or 24 V is available on the VHF\/UHF inputs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5 inputs: 1 SAT + 1 FM + 1 DAB\/VHF + 2 UHF\u003c\/li\u003e\n\u003cli\u003eProcesses up to 20 channels (terrestrial and satellite)\u003c\/li\u003e\n\u003cli\u003eAdjacent-channel selectivity: 50 dB — sharpest filters on the market\u003c\/li\u003e\n\u003cli\u003eChannel conversion: not available in this model\u003c\/li\u003e\n\u003cli\u003eReal-time AGC on all individual multiplexes\u003c\/li\u003e\n\u003cli\u003eFlex matrix: complete flexibility in assigning filters from any input to the output\u003c\/li\u003e\n\u003cli\u003eAutomatic LTE protection: selectable at 694 MHz, 790 MHz or OFF\u003c\/li\u003e\n\u003cli\u003e1 main output (SAT-FM-DAB-VHF-UHF) + 1 test port (–30 dB)\u003c\/li\u003e\n\u003cli\u003eRemote power on VHF\/UHF inputs: 12 V or 24 V (100 mA total for 3 inputs)\u003c\/li\u003e\n\u003cli\u003eESD protection on all inputs\u003c\/li\u003e\n\u003cli\u003eMade in Europe\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e50 dB adjacent-channel selectivity suppresses interference from neighbouring channels, enabling use of adjacent frequencies that weaker filters cannot separate\u003c\/li\u003e\n\u003cli\u003eReal-time AGC keeps output levels stable automatically, eliminating the need to readjust after seasonal signal-level changes\u003c\/li\u003e\n\u003cli\u003eThe Flex matrix makes it straightforward to remap channel assignments from any input to the combined output without rewiring\u003c\/li\u003e\n\u003cli\u003eLTE protection at three selectable points (694\/790 MHz or OFF) adapts to local spectrum refarming without hardware changes\u003c\/li\u003e\n\u003cli\u003eThe –30 dB test port allows level monitoring during commissioning without disturbing the main output\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 6712 Profino Revolution SAT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 SAT + 1 FM + 1 DAB\/VHF + 2 UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 main (SAT-FM-DAB-VHF-UHF) + 1 test port (–30 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range (MHz):\u003c\/strong\u003e SAT: 950–2400; FM: 88–108; VHF: 174–240; UHF: 470–862\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLTE protection (MHz):\u003c\/strong\u003e Automatic selection: 694, 790 or OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput level (dBµV):\u003c\/strong\u003e SAT: 40–95; FM: 37–77; VHF: 45–109; UHF: 45–109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT output power (–35 dBc\/IM3, 2 carriers) (dBµV):\u003c\/strong\u003e 119\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFM output power (60 dB\/IM3) (dBµV):\u003c\/strong\u003e 113\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF\/UHF output power (60 dB\/IM3) (dBµV):\u003c\/strong\u003e 115\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF\/UHF output power with 1 MUX (dBµV):\u003c\/strong\u003e 105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF\/UHF output power with 6 MUX (dBµV):\u003c\/strong\u003e 105\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel conversion:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain (dB):\u003c\/strong\u003e SAT: 40; FM: 35; VHF: \u0026gt;60; UHF: \u0026gt;60\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain adjustment:\u003c\/strong\u003e SAT: 20 dB; FM: 20 dB; VHF\/UHF: Channel AGC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure (dB):\u003c\/strong\u003e SAT: 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral attenuator (dB):\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope adjustment (dB):\u003c\/strong\u003e SAT: 12; VHF\/UHF: 9\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectivity (dB\/1 MHz):\u003c\/strong\u003e SAT: 40 (@862 MHz); VHF\/UHF: 35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss (dB):\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput MER (dB):\u003c\/strong\u003e VHF: 35; UHF: 35\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD protection:\u003c\/strong\u003e All inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC remote power (VHF\/UHF inputs):\u003c\/strong\u003e 12 V or 24 V, 100 mA total for 3 inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC at SAT input:\u003c\/strong\u003e 13 V\/18 V\/Bypass; 0\/22 kHz selectable by SWb 300\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSD port:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature (°C):\u003c\/strong\u003e –5 to +50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply (V):\u003c\/strong\u003e 100–240\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption (W):\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (mm):\u003c\/strong\u003e 217 × 165 × 59\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (kg):\u003c\/strong\u003e 0.8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1 x Johansson 6712 Profino Revolution SAT, 1 x power adaptor cord, 1 x instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe on-screen input level readout eliminates the need for a separate field strength meter during installation\u003c\/li\u003e\n\u003cli\u003eA single unit handles satellite, FM, DAB, VHF and UHF — reducing the number of components in the head-end cabinet\u003c\/li\u003e\n\u003cli\u003eMade in Europe, Profino Revolution is designed for worldwide application and comes with full installation documentation\u003c\/li\u003e\n\u003cli\u003eAutomatic LTE filtering means the amplifier is ready for spectrum changes without field modification\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56564298219902,"sku":"203413","price":227.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671563583870.webp?v=1779629519"},{"product_id":"johansson-7781-multiband-distribution-amplifier-1-cable-inpu","title":"Johansson 7781 Multiband Distribution Amplifier – 47-862 MHz, 15-35 dB Gain \u0026 LTE Filter","description":"\u003cp\u003eThe Johansson 7781 is a multiband split-band distribution amplifier with one cable input covering the 47–862 MHz frequency range. It delivers high output power with separate gain adjustments, making it suitable for distributing antenna signals to multiple outlets throughout a building.\u003c\/p\u003e\u003cp\u003eThe amplifier is fully LTE-ready and includes a high-input-power design that makes input overload virtually impossible. A detachable power supply is included, and a -30 dB test output allows signal measurement without disconnecting the main distribution.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 cable input covering 47–862 MHz\u003c\/li\u003e\n\u003cli\u003eSplit-band design with interstage attenuators and 20 dB dynamic range\u003c\/li\u003e\n\u003cli\u003eGain adjustable from 15 to 35 dB\u003c\/li\u003e\n\u003cli\u003eMaximum output power of 116 dBµV\u003c\/li\u003e\n\u003cli\u003e-30 dB test output for signal monitoring\u003c\/li\u003e\n\u003cli\u003eDetachable power supply included\u003c\/li\u003e\n\u003cli\u003eCompact housing\u003c\/li\u003e\n\u003cli\u003eFully LTE-ready with built-in LTE filter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSeparate gain adjustment allows fine-tuning to compensate for different cable lengths and building layouts\u003c\/li\u003e\n\u003cli\u003eHigh maximum input power (100 dBµV) prevents overload even in areas with strong broadcast signals\u003c\/li\u003e\n\u003cli\u003eLTE readiness blocks interference from 4G\/LTE mobile frequencies without additional filters\u003c\/li\u003e\n\u003cli\u003eThe test port lets an installer verify signal levels at any time without disrupting connected outlets\u003c\/li\u003e\n\u003cli\u003eDetachable power supply simplifies installation and replacement\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 main + 1 test port (-30 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 47–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 15–35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope:\u003c\/strong\u003e 5–15 dB (at 15 dB gain), 25–35 dB (at 35 dB gain)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Input Power:\u003c\/strong\u003e 100 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Power:\u003c\/strong\u003e 116 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss:\u003c\/strong\u003e \u0026gt;10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Port:\u003c\/strong\u003e -30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 100–240 VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 8 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUniversal 100–240 VAC supply works across all European and international mains voltages\u003c\/li\u003e\n\u003cli\u003eCompact housing makes it straightforward to install in a head-end cabinet or equipment rack\u003c\/li\u003e\n\u003cli\u003eIncludes a power adapter cord and instruction manual for a complete installation out of the box\u003c\/li\u003e\n\u003cli\u003eFar more efficient than its predecessor, reducing running costs in long-term installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56564304675198,"sku":"203322","price":113.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671564992894.webp?v=1779614935"},{"product_id":"anttron-a181-wideband-catv-amplifier","title":"Anttron A181 Wideband CATV Amplifier – 21 dB Forward, 10 dB Return \u0026 GaAs-MMIC 230 VAC","description":"\u003cp\u003eThe Anttron A181 is a wideband CATV amplifier specifically designed for CATV installations handling both digital and analogue channels. Its die-cast aluminium chassis and GaAs-MMIC transistor technology combine to produce a compact unit with high linearity and efficiency, suitable for trunk and distribution applications.\u003c\/p\u003e\u003cp\u003eThe amplifier includes separate forward-path gain adjustment (0–18 dB range), slope adjustment, and return-path gain adjustment, allowing the installer to compensate for cable loss characteristics across the full frequency range. A noise figure below 7 dB maintains signal quality even at the end of a long cable run.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input, 1 output — no test output\u003c\/li\u003e\n\u003cli\u003eForward gain (85–862 MHz): 21 dB\u003c\/li\u003e\n\u003cli\u003eReturn path gain (5–65 MHz): 10 dB\u003c\/li\u003e\n\u003cli\u003eAttenuation range (forward and return path): 0–18 dB\u003c\/li\u003e\n\u003cli\u003eSlope attenuation range (forward path): 0–15 dB\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC transistor for high linearity and efficiency\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium chassis for compact, robust construction\u003c\/li\u003e\n\u003cli\u003eMains powered at 230 VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSeparate forward and return path gain adjustments allow precise optimisation of both downstream and upstream signal levels in two-way CATV networks\u003c\/li\u003e\n\u003cli\u003eSlope adjustment compensates for frequency-dependent cable attenuation, ensuring flat signal response across the full forward band\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC technology delivers high maximum output level (118 dBµV) with low noise for reliable reception at the subscriber end\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium housing provides mechanical robustness and effective heat dissipation in continuous-operation installations\u003c\/li\u003e\n\u003cli\u003eLow 6 W power consumption reduces operating costs in always-on CATV head-end installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Outputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Output:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForward Gain (85–862 MHz):\u003c\/strong\u003e 21 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Path Gain (5–65 MHz):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation Range (forward\/return path):\u003c\/strong\u003e 0–18 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope Attenuation Range (forward path):\u003c\/strong\u003e 0–15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e \u0026lt;7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\/Output Return Loss:\u003c\/strong\u003e \u0026gt;10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Level (IM3: -52 dB, 3 equal carriers):\u003c\/strong\u003e 118 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230 VAC (-10%, +15%)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 6 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIncludes an Allen key and instruction manual for complete installation out of the box\u003c\/li\u003e\n\u003cli\u003eCompact aluminium chassis installs easily in a standard CATV head-end rack or enclosure\u003c\/li\u003e\n\u003cli\u003eThe 0–18 dB attenuation range and 0–15 dB slope adjustment provide the flexibility needed for diverse cable plant configurations\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for CATV applications — not a generic amplifier — so all specifications are optimised for this use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56564315652478,"sku":"203324","price":86.45,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671571022206.webp?v=1779629625"},{"product_id":"anttron-am124-wideband-catv-amplifier","title":"Anttron AM124 Wideband CATV Amplifier – 40 dB Forward Gain, -30 dB Test Port \u0026 GaAs-MMIC","description":"\u003cp\u003eThe Anttron AM124 is a wideband CATV amplifier designed for CATV installations carrying both digital and analogue channels. Its die-cast aluminium chassis and GaAs-MMIC transistor produce a compact unit with high linearity and efficiency. The AM124 differs from the A181 model with its higher 40 dB forward gain and the addition of a -30 dB test input\/output port.\u003c\/p\u003e\u003cp\u003eThe amplifier provides separate forward-path gain adjustment, slope adjustment, and return-path gain adjustment. The attenuation range covers 0–18 dB for both paths, while the slope attenuation range on the forward path is 0–15 dB. Noise figure remains below 7 dB throughout the operating range.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input, 1 output\u003c\/li\u003e\n\u003cli\u003eTest input\/output: yes, -30 dB\u003c\/li\u003e\n\u003cli\u003eForward gain (85–862 MHz): 40 dB\u003c\/li\u003e\n\u003cli\u003eReturn path gain (5–65 MHz): 10 dB\u003c\/li\u003e\n\u003cli\u003eAttenuation range (forward and return path): 0–18 dB\u003c\/li\u003e\n\u003cli\u003eSlope attenuation range (forward path): 0–15 dB\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC transistor for high linearity and efficiency\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium chassis for compact, robust construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e40 dB forward gain covers longer cable runs and larger distribution networks compared to lower-gain CATV amplifiers\u003c\/li\u003e\n\u003cli\u003eThe -30 dB test port allows signal level monitoring during installation and maintenance without interrupting service\u003c\/li\u003e\n\u003cli\u003eSeparate forward and return path gain controls enable optimisation of both downstream video and upstream data paths in two-way networks\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC technology delivers a maximum output of 118 dBµV with a noise figure below 7 dB, preserving signal quality to the subscriber\u003c\/li\u003e\n\u003cli\u003e6 W power consumption allows always-on operation with minimal energy cost\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Outputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Input\/Output:\u003c\/strong\u003e Yes, -30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForward Gain (85–862 MHz):\u003c\/strong\u003e 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Path Gain (5–65 MHz):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation Range (forward\/return path):\u003c\/strong\u003e 0–18 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope Attenuation Range (forward path):\u003c\/strong\u003e 0–15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e \u0026lt;7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\/Output Return Loss:\u003c\/strong\u003e \u0026gt;10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Level (IM3: -52 dB, 3 equal carriers):\u003c\/strong\u003e 118 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230 VAC (-10%, +15%)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 6 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIncludes an Allen key and instruction manual for a complete installation immediately out of the box\u003c\/li\u003e\n\u003cli\u003eThe compact die-cast aluminium housing installs neatly in any standard CATV rack or enclosure\u003c\/li\u003e\n\u003cli\u003eEAN: 5420037631247 — easily verified for procurement and inventory management\u003c\/li\u003e\n\u003cli\u003eConsistent 6 W consumption across all gain settings keeps energy costs predictable in long-term installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56564316373374,"sku":"203323","price":83.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671571743102.webp?v=1779629630"},{"product_id":"johansson-7785-multiband-amplifier-5-inputs","title":"Johansson 7785 Multiband Head-End Amplifier – 5 Inputs FM\/DAB\/UHF1\/UHF2\/SAT \u0026 LTE-Ready","description":"\u003cp\u003eThe Johansson 7785 is a multiband split-band distribution amplifier with five individual inputs covering BI\/FM, BIII\/DAB, UHF1, UHF2, and SAT frequency bands. Each input has independent gain adjustment, allowing precise optimisation of each signal path in a single head-end unit.\u003c\/p\u003e\u003cp\u003eThe amplifier is fully LTE-ready and RED compliant (selectivity classifications 0 and 1). It includes switchable VDC remote power, a detachable power supply, and a -30 dB test output. The UHF1 and UHF2 inputs can be switched between 470–694 MHz and 470–862 MHz to accommodate different regional frequency plans or LTE filter requirements.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5 inputs: BI\/FM (47–108 MHz), BIII\/DAB (174–240 MHz), UHF1 (470–694 or 862 MHz, switchable), UHF2 (470–694 or 862 MHz, switchable), SAT (950–2400 MHz)\u003c\/li\u003e\n\u003cli\u003e1 main output + 1 test port (-30 dB)\u003c\/li\u003e\n\u003cli\u003eSplit-band amplifier with interstage attenuators and 20 dB dynamic range per input\u003c\/li\u003e\n\u003cli\u003eSwitchable VDC remote power: OFF – 12V – 24V\u003c\/li\u003e\n\u003cli\u003eSAT DC mode: OFF – 13V – 18V – 22 kHz (selection: internal, power inserter, or external)\u003c\/li\u003e\n\u003cli\u003eRED compliant — selectivity classifications 0 and 1\u003c\/li\u003e\n\u003cli\u003eDetachable power supply included\u003c\/li\u003e\n\u003cli\u003eCompact housing\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive separate inputs with independent gain control allow each band to be individually optimised within one compact unit, eliminating the need for separate per-band amplifiers\u003c\/li\u003e\n\u003cli\u003eSwitchable UHF frequency range (694 or 862 MHz upper limit) adapts the amplifier to national frequency plans with built-in LTE interference rejection\u003c\/li\u003e\n\u003cli\u003eVDC switchable remote power supplies antenna pre-amplifiers or masthead amplifiers directly through the coaxial cable\u003c\/li\u003e\n\u003cli\u003eSAT DC mode supports LNB powering with 13V\/18V switching and 22 kHz tone for satellite band\/polarity selection\u003c\/li\u003e\n\u003cli\u003eRED compliance ensures the amplifier meets EU radio equipment directive requirements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 5 (BI\/FM, BIII\/DAB, UHF1, UHF2, SAT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 main + 1 test port (-30 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range — BI\/FM:\u003c\/strong\u003e 47–108 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range — BIII\/DAB:\u003c\/strong\u003e 174–240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range — UHF1:\u003c\/strong\u003e 470–694 or 862 MHz (switchable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range — UHF2:\u003c\/strong\u003e 470–694 or 862 MHz (switchable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range — SAT:\u003c\/strong\u003e 950–2400 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain — BI\/FM:\u003c\/strong\u003e 10–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain — BIII\/DAB:\u003c\/strong\u003e 10–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain — UHF1:\u003c\/strong\u003e 15–35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain — UHF2:\u003c\/strong\u003e 15–35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain — SAT:\u003c\/strong\u003e 10–35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope Adjustment — SAT:\u003c\/strong\u003e 0–10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Input Power — BI\/FM (-60 dBc):\u003c\/strong\u003e 94 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Input Power — BIII\/DAB (-60 dBc):\u003c\/strong\u003e 92 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Input Power — UHF1 (-60 dBc):\u003c\/strong\u003e 96 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Input Power — UHF2 (-60 dBc):\u003c\/strong\u003e 96 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Input Power — SAT (-35 dBc):\u003c\/strong\u003e 97 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Power — BI\/FM (-60 dBc):\u003c\/strong\u003e 118 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Power — BIII\/DAB (-60 dBc):\u003c\/strong\u003e 119 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Power — UHF1 (-60 dBc):\u003c\/strong\u003e 118 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Power — UHF2 (-60 dBc):\u003c\/strong\u003e 118 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Power — SAT (-35 dBc):\u003c\/strong\u003e 115 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure — BI\/FM:\u003c\/strong\u003e 4.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure — BIII\/DAB:\u003c\/strong\u003e 4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure — UHF1:\u003c\/strong\u003e 5.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure — UHF2:\u003c\/strong\u003e 5.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure — SAT:\u003c\/strong\u003e 7.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss:\u003c\/strong\u003e \u0026gt;10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Port:\u003c\/strong\u003e -30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power (V):\u003c\/strong\u003e OFF – 12V – 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Mode (mA) — BIII\/DAB, UHF1, UHF2:\u003c\/strong\u003e 100 mA each\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Mode SAT (mA):\u003c\/strong\u003e OFF – 13V – 18V – 22 kHz (selection: internal, power inserter, or external)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT Remote Power:\u003c\/strong\u003e 350 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRED Selectivity Classification:\u003c\/strong\u003e 0 and 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupply Voltage:\u003c\/strong\u003e 100–240 VAC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 29 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUniversal 100–240 VAC supply works across all European mains voltages\u003c\/li\u003e\n\u003cli\u003eKit includes power adapter cord and instruction manual for a complete installation out of the box\u003c\/li\u003e\n\u003cli\u003eAll five bands handled in one compact housing, simplifying head-end wiring compared to using multiple single-band amplifiers\u003c\/li\u003e\n\u003cli\u003eFar more efficient than its predecessor, reducing long-term operating costs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56564332691838,"sku":"203325","price":169.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671585505662.webp?v=1779614955"},{"product_id":"johansson-9604-sat-line-amplifier","title":"Johansson 9604 SAT Line Amplifier – 950-2150 MHz, 13-18 dB Gain \u0026 DC Pass 500 mA","description":"\u003cp\u003eThe Johansson 9604 is a SAT line amplifier built for satellite signal distribution. It amplifies the intermediate frequency output from an LNB throughout a coaxial distribution network, maintaining signal integrity across the full satellite band.\u003c\/p\u003e\u003cp\u003eWith a noise figure of 4 dB and a maximum output level of 110 dBµV, it is suited for residential and small commercial satellite installations where signal strength needs to be maintained over longer cable runs or across multiple splitters.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFull SAT band coverage: 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003eVariable gain: 13 dB at 950 MHz, 18 dB at 2150 MHz\u003c\/li\u003e\n\u003cli\u003eMaximum output level of 110 dBµV\u003c\/li\u003e\n\u003cli\u003eDC power pass up to 500 mA for LNB powering\u003c\/li\u003e\n\u003cli\u003ePowered via coaxial cable: 13–18 V \/ 30 mA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompensates for signal loss on long cable runs or after splitters in SAT distribution\u003c\/li\u003e\n\u003cli\u003eHigher gain at the upper end of the band offsets the greater cable attenuation at higher frequencies\u003c\/li\u003e\n\u003cli\u003eDC pass capability allows the LNB to be powered through the same coaxial cable without a separate power feed\u003c\/li\u003e\n\u003cli\u003eLow current draw (30 mA) makes it easy to integrate into existing system power budgets\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 13 dB (at 950 MHz) \/ 18 dB (at 2150 MHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Level:\u003c\/strong\u003e 110 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 13–18 V \/ 30 mA (via coaxial)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Pass:\u003c\/strong\u003e 500 mA max\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompact inline design fits easily into existing coaxial runs without additional hardware\u003c\/li\u003e\n\u003cli\u003ePassive DC pass eliminates the need for a separate power injector for the LNB\u003c\/li\u003e\n\u003cli\u003eJohansson's professional-grade build ensures consistent performance over time\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56564430111102,"sku":"205101","price":7.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671622238590.webp?v=1779615046"},{"product_id":"anttron-am340lte-multiband-amplifier-5g","title":"Anttron AM340LTE 3-Input Multiband TV Amplifier – 40 dB UHF, 5G LTE Filter \u0026 GaAs-MMIC","description":"\u003cp\u003eThe Anttron AM340LTE is a central-installation multiband amplifier designed for the distribution of digital and analogue television signals in apartment blocks and commercial buildings. It accepts three separate inputs — BI+FM, Band III (DAB), and UHF — and combines them into a single output with independently adjustable attenuation (0–18 dB) per input, allowing installers to balance signal levels from different sources.\u003c\/p\u003e\u003cp\u003eThe amplifier is built around GaAs-MMIC transistor technology, which delivers high linearity and efficiency from a compact aluminium die-cast chassis. A built-in 5G LTE filter on the UHF input suppresses mobile interference without requiring an external filter. A test output (−30 dB) and front-mounted attenuators simplify commissioning and fine-tuning. The UHF input also carries a 12V\/200mA remote power supply for a mast-head preamplifier.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3 inputs: BI+FM, Band III (DAB), UHF\u003c\/li\u003e\n\u003cli\u003e1 output with test output at −30 dB\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5G LTE filter on UHF input\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC transistor technology for high linearity\u003c\/li\u003e\n\u003cli\u003eAluminium die-cast chassis\u003c\/li\u003e\n\u003cli\u003eAttenuation range per input: 0–18 dB\u003c\/li\u003e\n\u003cli\u003eRemote power supply for preamplifier: 12V \/ 200mA (UHF input only, selectable)\u003c\/li\u003e\n\u003cli\u003eMains voltage: 230Vac (−10%, +15%)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThree independent inputs let installers combine aerial, DAB, and FM sources into a single cable run\u003c\/li\u003e\n\u003cli\u003ePer-input attenuation (0–18 dB) balances unequal signal levels without external pads\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC technology gives high output levels and low noise in a small enclosure\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE filter eliminates 5G interference on the UHF path without an additional accessory\u003c\/li\u003e\n\u003cli\u003eTest output at −30 dB allows signal-level monitoring without interrupting the main distribution\u003c\/li\u003e\n\u003cli\u003eRemote 12V power on the UHF input drives a mast-head preamplifier from the same coaxial cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inputs:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Outputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Output:\u003c\/strong\u003e −30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain BI+FM Input:\u003c\/strong\u003e 24 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain Band III (DAB) Input:\u003c\/strong\u003e 33 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain UHF Input:\u003c\/strong\u003e 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation Range (each input):\u003c\/strong\u003e 0–18 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e \u0026lt; 7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Level (DIN45004B):\u003c\/strong\u003e 120 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power Supply for Preamplifier:\u003c\/strong\u003e 12V \/ 200mA selectable (UHF input only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMains Voltage:\u003c\/strong\u003e 230Vac (−10%, +15%)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 6 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e Aluminium die-cast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransistor Technology:\u003c\/strong\u003e GaAs-MMIC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the Box:\u003c\/strong\u003e AM340LTE amplifier, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAll three signal bands — aerial UHF, DAB, and FM — are combined in one box, reducing installation hardware\u003c\/li\u003e\n\u003cli\u003eThe built-in LTE filter means one less component to source and install for 5G-compliant distributions\u003c\/li\u003e\n\u003cli\u003eFront-panel attenuators make level adjustment quick without opening the enclosure\u003c\/li\u003e\n\u003cli\u003eLow 6W power consumption keeps running costs minimal in always-on central distribution systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56577289355646,"sku":"203326","price":89.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674564411774.webp?v=1779631188"},{"product_id":"johansson-7724l2-vhf-uhf-line-amplifier-lte-5g","title":"Johansson 7724L2 VHF\/UHF Line Amplifier – LTE\/5G Filter \u0026 4 Outputs","description":"\u003cp\u003eThe Johansson 7724L2 is a distribution line amplifier for terrestrial and VHF television signals. It accepts a single combined VHF\/UHF antenna input across two sub-bands (40–320 MHz and 470–694 MHz) and splits the amplified signal to four outputs. A built-in LTE\/5G filter suppresses interference from mobile networks operating above the UHF television band without requiring an external filter module.\u003c\/p\u003e\u003cp\u003eVHF and UHF gain are each adjustable independently, giving precise control over the output level for each frequency range. A 24 VDC switchable remote power output allows a mast-head amplifier to be powered through the coaxial cable from the same unit. The amplifier can be mounted on a wall or on a standard DIN rail, and a power LED indicates operational status.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input: 40–320 + 470–694 MHz (combined VHF\/UHF)\u003c\/li\u003e\n\u003cli\u003e4 outputs\u003c\/li\u003e\n\u003cli\u003eAdjustable VHF gain: 13–28 dB\u003c\/li\u003e\n\u003cli\u003eAdjustable UHF gain: 15–25 dB\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/5G filter\u003c\/li\u003e\n\u003cli\u003e24 VDC switchable remote power output (55 mA)\u003c\/li\u003e\n\u003cli\u003ePower LED indicator\u003c\/li\u003e\n\u003cli\u003eWall and DIN rail mountable\u003c\/li\u003e\n\u003cli\u003eMains supply: 230 V ~ \/ 6.9 VA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIndependent VHF and UHF gain adjustment allows the signal level on each band to be optimised separately for the receiving installation\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/5G filter eliminates the need for a separate external filter, reducing component count and installation cost\u003c\/li\u003e\n\u003cli\u003eFour outputs distribute the amplified signal to four separate TV points from a single amplifier unit\u003c\/li\u003e\n\u003cli\u003eSwitchable 24 VDC remote power through the coax eliminates the need for a separate power supply at the mast head\u003c\/li\u003e\n\u003cli\u003eWall or DIN rail mounting flexibility suits both open wall installations and distribution cabinet integration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 7724L2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 40–320 + 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of inputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of outputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable VHF gain:\u003c\/strong\u003e 13–28 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable UHF gain:\u003c\/strong\u003e 15–25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure:\u003c\/strong\u003e 3.0 dB (typ.)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum output level:\u003c\/strong\u003e 102 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss (input\/output):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation between outputs:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote power:\u003c\/strong\u003e 24V \/ 55mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower:\u003c\/strong\u003e 230V~ \/ 6.9VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Wall or DIN rail\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne unit covers VHF and UHF in a single box — no separate VHF or UHF amplifiers needed in the same installation\u003c\/li\u003e\n\u003cli\u003eIndependent gain trimmers for each band mean you can balance the output level across your whole antenna system in one place\u003c\/li\u003e\n\u003cli\u003eThe integrated LTE\/5G filter keeps the distribution clean as mobile networks expand into television spectrum\u003c\/li\u003e\n\u003cli\u003eDIN rail mounting option lets the amplifier sit neatly inside a communications cabinet alongside other head-end equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56577675592062,"sku":"203226","price":29.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674714194302.webp?v=1779631895"},{"product_id":"johansson-7722l2-vhf-uhf-line-amplifier-lte-5g","title":"Johansson 7722L2 VHF\/UHF Line Amplifier – LTE\/5G Filter \u0026 2 Outputs","description":"\u003cp\u003eThe Johansson 7722L2 is a line amplifier for terrestrial TV signal distribution, covering VHF (40–320 MHz) and UHF (470–694 MHz) frequency bands. Its built-in LTE\/5G filter blocks interference from mobile networks, protecting signal quality on both bands.\u003c\/p\u003e\u003cp\u003eWith independently adjustable gain on VHF and UHF, the 7722L2 is suited for installations where the two bands need separate level optimisation. Remote powering capability and flexible mounting options make it straightforward to deploy in both new builds and retrofit installations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input covering 40–320 MHz (VHF) and 470–694 MHz (UHF) in a single unit\u003c\/li\u003e\n\u003cli\u003e2 outputs for splitting the amplified signal\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/5G filter to suppress interference from mobile networks\u003c\/li\u003e\n\u003cli\u003eIndependently adjustable VHF gain: 15–30 dB\u003c\/li\u003e\n\u003cli\u003eIndependently adjustable UHF gain: 18–28 dB\u003c\/li\u003e\n\u003cli\u003eSwitchable remote power (24 V \/ 55 mA) for powering remote devices\u003c\/li\u003e\n\u003cli\u003ePower LED indicator for quick status confirmation\u003c\/li\u003e\n\u003cli\u003eCompatible with wall mounting and DIN rail mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIndependent gain control on VHF and UHF allows precise level balancing without additional equalisation hardware\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/5G rejection prevents co-channel interference as 5G networks expand into former TV spectrum\u003c\/li\u003e\n\u003cli\u003eSwitchable remote power eliminates the need for a separate power supply at the mast head\u003c\/li\u003e\n\u003cli\u003eTwo outputs allow the amplified signal to feed two distribution lines from a single unit\u003c\/li\u003e\n\u003cli\u003eDual mounting compatibility — wall or DIN rail — suits a wide range of enclosure types\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 7722L2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 40–320 MHz (VHF) + 470–694 MHz (UHF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Outputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable VHF Gain:\u003c\/strong\u003e 15–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable UHF Gain:\u003c\/strong\u003e 18–28 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 3.0 dB (typical)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Level:\u003c\/strong\u003e 107 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (input\/output):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Between Outputs:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power:\u003c\/strong\u003e 24 V \/ 55 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMains Power:\u003c\/strong\u003e 230 V~ \/ 6.9 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Wall or DIN rail\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReady to install in a standard DIN rail cabinet or on any wall surface without extra adapters\u003c\/li\u003e\n\u003cli\u003eThe LED power indicator gives instant confirmation that the unit is running, simplifying troubleshooting\u003c\/li\u003e\n\u003cli\u003eCompact design keeps the installation tidy inside headend enclosures\u003c\/li\u003e\n\u003cli\u003eManufactured by Johansson, a specialist in professional antenna signal processing equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56577676050814,"sku":"203225","price":25.45,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674714587518.webp?v=1779631900"},{"product_id":"johansson-7720l2-vhf-uhf-line-amplifier-lte-5g","title":"Johansson 7720L2 VHF\/UHF Line Amplifier – LTE\/5G Filter \u0026 Single Output","description":"\u003cp\u003eThe Johansson 7720L2 VHF-UHF - Line Amplifier LTE\/5G is a audio amplifier from Johansson, suitable for audio amplifiers applications. Built to deliver reliable everyday performance, it ships ready-to-use with the standard fittings and connectors expected for its category.\u003c\/p\u003e\u003cp\u003eWhether you're upgrading existing equipment or building a new setup, this product offers the build quality and standards-compliance required for both home and commercial environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAudio Amplifier from Johansson\u003c\/li\u003e\n\u003cli\u003eDesigned for audio amplifiers use\u003c\/li\u003e\n\u003cli\u003eReady-to-use with standard fittings and connectors\u003c\/li\u003e\n\u003cli\u003eBuilt to recognised quality and safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDrop-in replacement or upgrade — no specialist installation required\u003c\/li\u003e\n\u003cli\u003eReliable performance for both residential and commercial applications\u003c\/li\u003e\n\u003cli\u003eCompatible with standard equipment in this category\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBrand: Johansson\u003c\/li\u003e\n\u003cli\u003eType: Audio Amplifier\u003c\/li\u003e\n\u003cli\u003eCategory: TV \u0026amp; Audio\u003c\/li\u003e\n\u003cli\u003eSubcategory: Audio Amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTrusted Johansson build quality\u003c\/li\u003e\n\u003cli\u003eStandards-compliant fitment with existing equipment\u003c\/li\u003e\n\u003cli\u003eSuitable for everyday domestic use and demanding commercial environments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56577677984126,"sku":"5404041101583","price":19.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674715275646.webp?v=1779631905"},{"product_id":"johansson-kit-7329-2436-mast-amplifier-lte-5g","title":"Johansson KIT 7329\/2436 UHF Mast Amplifier – LTE\/5G, 32 dB Gain \u0026 2-Output PSU","description":"\u003cp\u003eThe Johansson KIT 7329\/2436 bundles the 7329 mast-head amplifier and a 24 V power supply into a ready-to-install UHF reception system. The 7329 amplifier is housed in a protective weatherproof enclosure that insulates it from moisture at the antenna mast, while the indoor power supply distributes the amplified signal to two receivers.\u003c\/p\u003e\u003cp\u003eWith built-in LTE\/5G rejection, the kit is designed for installations in areas where 5G services occupy frequencies adjacent to the UHF TV band (Ch. 21–48 \/ 470–694 MHz). The power supply includes short-circuit protection and mounts on a wall or DIN rail.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e7329 mast amplifier with 1 input and 1 output, covering 470–694 MHz (Ch. 21–48)\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE\/5G rejection on the mast-head amplifier\u003c\/li\u003e\n\u003cli\u003eFixed gain of 32 dB with a noise figure of 2.5 dB\u003c\/li\u003e\n\u003cli\u003eProtective weatherproof enclosure for the mast-head unit, guarding against moisture\u003c\/li\u003e\n\u003cli\u003ePower supply with 2 outputs and DC output of 24 V \/ 150 mA\u003c\/li\u003e\n\u003cli\u003ePower supply insertion loss 4–5 dB; output isolation 10 dB\u003c\/li\u003e\n\u003cli\u003ePower supply accepts 230 V~ \/ 50 Hz mains input (4.6 W consumption)\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection on the power supply\u003c\/li\u003e\n\u003cli\u003ePower LED indicators on both amplifier and power supply\u003c\/li\u003e\n\u003cli\u003ePower supply mounts on wall or DIN rail\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLTE\/5G rejection at the mast head prevents interference before it enters the cable run, maintaining clean signal throughout the system\u003c\/li\u003e\n\u003cli\u003eThe weatherproof enclosure protects the amplifier electronics from condensation and rain, extending service life in outdoor installations\u003c\/li\u003e\n\u003cli\u003eTwo power supply outputs allow simultaneous feed of two independent receivers or distribution points from a single indoor unit\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection on the power supply prevents damage if a downstream device develops a fault\u003c\/li\u003e\n\u003cli\u003eKit format means the amplifier and power supply are matched and ready to install together, reducing installation time\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson KIT 7329\/2436\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier (7329) — Frequency Range:\u003c\/strong\u003e 470–694 MHz (Ch. 21–48)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier (7329) — Inputs \/ Outputs:\u003c\/strong\u003e 1 \/ 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier (7329) — Gain:\u003c\/strong\u003e 32 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier (7329) — Noise Figure:\u003c\/strong\u003e 2.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier (7329) — Max. Input Level:\u003c\/strong\u003e 82 dBmV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier (7329) — Max. Output Level:\u003c\/strong\u003e 108 dBmV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier (7329) — Power Supply Voltage:\u003c\/strong\u003e 24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier (7329) — Current Consumption:\u003c\/strong\u003e 65 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply — Outputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply — Insertion Loss:\u003c\/strong\u003e 4–5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply — Output Isolation:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply — AC Input:\u003c\/strong\u003e 230 V~ \/ 50 Hz \/ 4.6 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply — DC Output Voltage:\u003c\/strong\u003e 24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply — Output Current:\u003c\/strong\u003e 150 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply — Mounting:\u003c\/strong\u003e Wall or DIN rail\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEverything needed for a mast-head amplified installation arrives in one box — amplifier, protective housing, and power supply\u003c\/li\u003e\n\u003cli\u003eDIN rail or wall mounting on the power supply keeps the indoor headend tidy\u003c\/li\u003e\n\u003cli\u003eLED indicators on both units make fault-finding straightforward without opening enclosures\u003c\/li\u003e\n\u003cli\u003eJohansson's specialist antenna equipment heritage ensures reliable performance in demanding RF environments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56577679360382,"sku":"203162","price":29.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674716389758.webp?v=1779631909"},{"product_id":"johansson-kit-7474l2-2437-auto-programming-web-amplifier-5g","title":"Johansson 7474L2\/2437 SMART AMP – 4-Input VHF\/UHF, Auto-Programming \u0026 5G\/LTE Filter","description":"\u003cp\u003eThe Johansson KIT 7474L2\/2437 is an auto-programming web amplifier intended for combining 2, 3, or 4 terrestrial TV antennas for full HDTV reception. Unlike a passive splitter — which causes a minimum 4dB signal loss when combining two antennas and cannot resolve channels sharing the same frequency — this amplifier uses SMART AMP technology to scan all channels automatically, boost the weakest signals, and deliver uniform output power across all channels at 90dBµV.\u003c\/p\u003e\u003cp\u003eThe kit consists of the 7474L2 amplifier and the 2437 dual-output power supply. The amplifier supports LTE band re-use (L2: CH49–69, 694MHz–862MHz, switchable), so channels that share the same frequency can be relocated to the LTE band. SAW filters on all four inputs provide built-in anti-5G and LTE protection. The 2437 power supply is wall or DIN-rail mountable and delivers 12V DC over coax with short-circuit protection.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4 VHF\/UHF inputs, 1 output\u003c\/li\u003e\n\u003cli\u003eSMART AMP automatic channel scanning and equalisation\u003c\/li\u003e\n\u003cli\u003eUniform output power: 90dBµV on all channels\u003c\/li\u003e\n\u003cli\u003eLTE rejection: \u0026gt;40dB (5G, above CH48)\u003c\/li\u003e\n\u003cli\u003eAdjacent channel isolation: \u0026gt;35dB\u003c\/li\u003e\n\u003cli\u003eFrequency range: 174–862MHz (VHF Band III + UHF)\u003c\/li\u003e\n\u003cli\u003eLTE band re-use: L2 = CH49–69 (694MHz–862MHz), switchable ON\/OFF\u003c\/li\u003e\n\u003cli\u003eSAW filters on all inputs for 5G\/LTE protection\u003c\/li\u003e\n\u003cli\u003eInput sensitivity: minimum 40dBµV\u003c\/li\u003e\n\u003cli\u003eAmplifier power: 12V \/ 350mA (DC over coax)\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -20 to +50°C\u003c\/li\u003e\n\u003cli\u003eDC power over coax — no separate cable to the amplifier needed\u003c\/li\u003e\n\u003cli\u003eAll ports ESD protected\u003c\/li\u003e\n\u003cli\u003e2437 power supply: 2 outputs, 12VDC \/ 400mA, AC input 110–240VAC \/ 50–60Hz \/ 6.5W\u003c\/li\u003e\n\u003cli\u003e2437 insertion loss: 4–5dB; isolation between outputs: 10dB\u003c\/li\u003e\n\u003cli\u003eShort-circuit protection and power LED on 2437 power supply\u003c\/li\u003e\n\u003cli\u003eWall or DIN-rail mountable power supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEliminates the minimum 4dB loss that a passive combiner causes when joining two antennas, preserving signal strength\u003c\/li\u003e\n\u003cli\u003eResolves same-frequency channel conflicts automatically — channels that would otherwise cancel each other out are relocated to the LTE re-use band\u003c\/li\u003e\n\u003cli\u003eFully automatic channel scan on double power start-up means no manual frequency programming is required after installation\u003c\/li\u003e\n\u003cli\u003eAutomatic country channel plan recognition adapts to the local frequency plan without manual configuration\u003c\/li\u003e\n\u003cli\u003eAdjacent channel isolation above 35dB handles the most difficult near-frequency interference situations\u003c\/li\u003e\n\u003cli\u003eBuilt-in SAW filters on all four inputs protect against 5G interference without needing external filters\u003c\/li\u003e\n\u003cli\u003eDC power over coax simplifies cable routing: only one coax run is needed between the power supply and the amplifier head\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e7474L2 — Inputs \/ Output:\u003c\/strong\u003e 4 inputs \/ 1 output\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 174–862MHz (VHF Band III + UHF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power:\u003c\/strong\u003e 90dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLTE rejection:\u003c\/strong\u003e \u0026gt;40dB (5G, above CH48)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjacent channel isolation:\u003c\/strong\u003e \u0026gt;35dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput sensitivity:\u003c\/strong\u003e minimum 40dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLTE band re-use:\u003c\/strong\u003e L2 = CH49–69 (694MHz–862MHz), switch ON\/OFF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier power:\u003c\/strong\u003e 12V \/ 350mA (DC over coax)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -20 to +50°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLTE protection:\u003c\/strong\u003e SAW filters on all inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2437 — Outputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2437 — Insertion loss:\u003c\/strong\u003e 4–5dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2437 — Isolation between outputs:\u003c\/strong\u003e 10dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2437 — AC input:\u003c\/strong\u003e 110–240VAC \/ 50–60Hz \/ 6.5W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2437 — DC output:\u003c\/strong\u003e 12VDC \/ 400mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2437 — Mounting:\u003c\/strong\u003e Wall or DIN-rail\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePlug-and-play setup: double power start-up triggers the full automatic channel scan — no laptop or app required\u003c\/li\u003e\n\u003cli\u003eCombining up to 4 antennas in one pass removes the need to choose between coverage areas\u003c\/li\u003e\n\u003cli\u003eThe 2437 power supply includes short-circuit protection and a status LED, making fault-finding straightforward\u003c\/li\u003e\n\u003cli\u003eKit includes: 1x Johansson 7474L2\/2437 amplifier kit, 1x manual, 1x wall clamp\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56577772683646,"sku":"203164","price":125.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674764919166.webp?v=1779615513"},{"product_id":"gbs-elettronica-jolly-line-45166-ams2-rf-4u-line-amplifier-5","title":"GBS Jolly Line 45166 AMS2\/RF 4U Line Amplifier – 1-In\/4-Out, 5G Filter \u0026 VHF\/UHF Gain","description":"\u003cp\u003eThe Jolly Line 45166 AMS2\/RF 4U is a mains-powered VHF–UHF line amplifier designed for antenna distribution in residential and light-commercial installations. It accepts one antenna input and delivers four amplified F-connector outputs, making it suitable for distributing a rooftop aerial signal to multiple TV points.\u003c\/p\u003e\n\u003cp\u003eAn integrated 5G filter blocks the 694–862 MHz band used by LTE networks, protecting reception quality in areas with strong mobile signal. Both VHF and UHF gain are independently adjustable, allowing the installer to balance the system for local signal conditions.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 antenna input, 4 amplified outputs\u003c\/li\u003e\n\u003cli\u003eAdjustable VHF gain: 0–15 dB\u003c\/li\u003e\n\u003cli\u003eAdjustable UHF gain: 10–25 dB\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5G filter: blocks 694–862 MHz\u003c\/li\u003e\n\u003cli\u003eF-type connectors\u003c\/li\u003e\n\u003cli\u003ePower LED indicator\u003c\/li\u003e\n\u003cli\u003eMains powered: 220–230 Vac \/ 50 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eFour outputs distribute one aerial to four TV points without extra splitters\u003c\/li\u003e\n\u003cli\u003eIndependent VHF and UHF gain trim lets the installer optimise for local signal levels\u003c\/li\u003e\n\u003cli\u003e5G filter eliminates LTE interference without removing any usable TV channels\u003c\/li\u003e\n\u003cli\u003ePower LED provides instant confirmation of active operation\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance matches standard coaxial distribution systems\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Jolly Line 45166 AMS2\/RF 4U\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4 (F-type connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF frequency range:\u003c\/strong\u003e 47 ÷ 230 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF frequency range:\u003c\/strong\u003e 470 ÷ 790 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G filter:\u003c\/strong\u003e 694 ÷ 862 MHz (blocked)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G insertion loss:\u003c\/strong\u003e \u0026lt;20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF gain:\u003c\/strong\u003e 0 ÷ 15 dB (adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF gain:\u003c\/strong\u003e 10 ÷ 25 dB (adjustable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum output level:\u003c\/strong\u003e 108 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure:\u003c\/strong\u003e 4 ÷ 5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 45 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 220–230 Vac \/ 50 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e 1× Jolly Line 45166 AMS2\/RF 4U Line Amplifier 5G\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-unit solution: one amplifier replaces a separate splitter and booster\u003c\/li\u003e\n\u003cli\u003eAdjustable gain means the same unit works in both strong- and weak-signal areas\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5G filter future-proofs the installation against ongoing LTE rollout\u003c\/li\u003e\n\u003cli\u003eStandard F-connectors accept all common coaxial cable assemblies\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56577925972350,"sku":"203227","price":25.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674836124030.webp?v=1779633513"},{"product_id":"gbs-elettronica-jolly-line-45973-eu-multiband-amplifier-5g","title":"GBS Jolly Line 45973-EU Multiband TV Amplifier – 3-In\/1-Out, Integrated 5G LTE Filter","description":"\u003cp\u003eThe Jolly line 45973-EU is a multiband amplifier engineered for central antenna distribution facilities handling digital and analogue terrestrial channels. Its aluminium die-cast chassis and GaAs-MMIC transistor technology deliver high linearity and efficiency in a compact form with low power consumption.\u003c\/p\u003e\u003cp\u003eThe amplifier features an integrated 5G filter (694–862 MHz) to prevent 5G mobile signals from interfering with UHF reception, a test output at -30dB, and front-panel attenuators for level adjustment. It carries European certification.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3 inputs, 1 output\u003c\/li\u003e\n\u003cli\u003eIntegrated 5G filter covering 694–862 MHz\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC transistor technology for high linearity\u003c\/li\u003e\n\u003cli\u003eAluminium die-cast chassis\u003c\/li\u003e\n\u003cli\u003eFront-panel attenuators on UHF, UHF 2 and VHF bands\u003c\/li\u003e\n\u003cli\u003eTest output: -30dB\u003c\/li\u003e\n\u003cli\u003eTele-power supply: automatic, 12Vdc \/ 80mA\u003c\/li\u003e\n\u003cli\u003eEuropean certification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5G filter suppresses interference from 694–862 MHz 5G signals, protecting UHF reception quality\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC design minimises noise while maintaining high output levels for large distribution networks\u003c\/li\u003e\n\u003cli\u003eDie-cast chassis provides mechanical protection and effective heat dissipation\u003c\/li\u003e\n\u003cli\u003eFront-panel attenuators let installers set correct signal levels without external equipment\u003c\/li\u003e\n\u003cli\u003eAutomatic tele-power supply simplifies powering remote LNBs or masthead amplifiers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Jolly line 45973-EU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of inputs:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of outputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain VHF:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain UHF:\u003c\/strong\u003e 35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency VHF:\u003c\/strong\u003e 47–230 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency UHF:\u003c\/strong\u003e 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G filter:\u003c\/strong\u003e 694–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF band attenuation range:\u003c\/strong\u003e 15–35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF band 2 attenuation range:\u003c\/strong\u003e 15–35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF band attenuation range:\u003c\/strong\u003e 10–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest output:\u003c\/strong\u003e -30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G attenuation:\u003c\/strong\u003e \u0026lt;20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax output:\u003c\/strong\u003e 118 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure:\u003c\/strong\u003e 6.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTele-power supply:\u003c\/strong\u003e Automatic, 12Vdc \/ 80mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 90–250Vac, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 13W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e35 dB UHF gain with a low 6.5 dB noise figure ensures strong, clean signal distribution across multi-outlet installations\u003c\/li\u003e\n\u003cli\u003e118 dBµV maximum output supports large residential or commercial antenna networks\u003c\/li\u003e\n\u003cli\u003e13W power draw keeps operating costs low for permanently installed equipment\u003c\/li\u003e\n\u003cli\u003eCompact die-cast body fits into standard head-end racks or enclosures without wasted space\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56578154463614,"sku":"203328","price":84.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674944487806.webp?v=1779615947"},{"product_id":"johansson-9653-wideband-sat-line-amplifier","title":"Johansson 9653 Wideband SAT Line Amplifier – 40-2400 MHz, 20 dB Gain \u0026 DC Pass-Through","description":"\u003cp\u003eThe Johansson 9653 is a wideband line amplifier designed for satellite signal distribution systems. It compensates for coaxial cable attenuation across the full SAT frequency range, from terrestrial frequencies up to 2400 MHz.\u003c\/p\u003e\n\u003cp\u003eWith gain figures rising from 5 dB at 40 MHz to 20 dB at 2150–2340 MHz, the 9653 is well suited to longer cable runs where high-frequency signals suffer the most loss. DC power pass allows it to be inserted inline without interrupting LNB powering.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWideband frequency coverage from 40 to 2400 MHz\u003c\/li\u003e\n\u003cli\u003eVariable gain profile: higher amplification at higher frequencies to counteract cable roll-off\u003c\/li\u003e\n\u003cli\u003eDC power pass up to 500 mA for transparent LNB supply\u003c\/li\u003e\n\u003cli\u003ePowered via the coaxial line at 13–18 V \/ 60 mA\u003c\/li\u003e\n\u003cli\u003eCompact inline form factor\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eRestores signal levels lost over long coaxial cable runs\u003c\/li\u003e\n\u003cli\u003eFrequency-dependent gain matches the loss profile of coaxial cable, delivering a flat signal at the receiver\u003c\/li\u003e\n\u003cli\u003eDC pass-through keeps the LNB powered without adding extra cabling\u003c\/li\u003e\n\u003cli\u003eLow current draw (60 mA) allows powering directly from the satellite receiver\u003c\/li\u003e\n\u003cli\u003eSmall dimensions make it easy to install in confined spaces or wall boxes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 9653\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 40–2400 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 5 dB @ 40 MHz \/ 6 dB @ 290 MHz \/ 10 dB @ 950 MHz \/ 20 dB @ 2150 MHz \/ 20 dB @ 2340 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Level:\u003c\/strong\u003e 110 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 13–18 V \/ 60 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Pass:\u003c\/strong\u003e 500 mA max.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 68 x 26 x 16 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne device solves coaxial cable loss for the full wideband satellite range without needing multiple amplifiers\u003c\/li\u003e\n\u003cli\u003eThe pass-through DC supply means no disruption to existing LNB or multiswitch power feeds\u003c\/li\u003e\n\u003cli\u003eJohansson build quality ensures stable performance in permanent installations\u003c\/li\u003e\n\u003cli\u003ePlug-in installation requires no tools beyond a coaxial F-connector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56578535457150,"sku":"205120","price":9.45,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675093385598.webp?v=1779634847"},{"product_id":"gbs-elettronica-jolly-line-45163-ams2-rf-2u-line-amplifier-5","title":"GBS Elettronica Jolly Line 45163 AMS2\/RF 2-Out TV Amplifier – 5G Filter, VHF\/UHF \u0026 F-Type","description":"\u003cp\u003eThe Jolly Line 45163 AMS2\/RF 2U is a two-output line amplifier covering both VHF and UHF bands with independently adjustable gain for each band. Its integrated 5G rejection filter blocks frequencies from 694 to 862 MHz, preventing interference from 5G mobile networks on terrestrial TV reception.\u003c\/p\u003e\u003cp\u003eDesigned for indoor antenna distribution installations, the amplifier uses F-type connectors and operates on standard 220–230 V mains power, making it straightforward to integrate into existing coaxial signal networks.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input \/ 2 outputs configuration for splitting the signal to two outlets\u003c\/li\u003e\n\u003cli\u003eAdjustable VHF gain: 10–25 dB\u003c\/li\u003e\n\u003cli\u003eAdjustable UHF gain: 15–30 dB\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5G filter rejecting 694–862 MHz with insertion loss below 20 dB\u003c\/li\u003e\n\u003cli\u003eF-type connectors on all ports\u003c\/li\u003e\n\u003cli\u003ePower LED indicator for at-a-glance operational status\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIndependent VHF and UHF gain controls let you fine-tune signal level to suit local conditions\u003c\/li\u003e\n\u003cli\u003eThe 5G filter prevents picture breakup caused by adjacent 5G network interference\u003c\/li\u003e\n\u003cli\u003eTwo outputs allow distribution to two separate TV points from a single antenna feed\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance matches standard coaxial antenna systems directly\u003c\/li\u003e\n\u003cli\u003eLow noise figure (4–5 dB) preserves signal quality after amplification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e AMS2\/RF 2U — Jolly Line 45163\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs \/ Outputs:\u003c\/strong\u003e 1 input \/ 2 outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF frequency range:\u003c\/strong\u003e 40–240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF frequency range:\u003c\/strong\u003e 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G filter range:\u003c\/strong\u003e 694–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF gain (adjustable):\u003c\/strong\u003e 10–25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF gain (adjustable):\u003c\/strong\u003e 15–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G insertion loss:\u003c\/strong\u003e \u0026lt;20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum output level:\u003c\/strong\u003e 108 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure:\u003c\/strong\u003e 4–5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent consumption:\u003c\/strong\u003e 45 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 220–230 V AC \/ 50 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAdjustable gain means you can compensate for long cable runs without over-driving the signal\u003c\/li\u003e\n\u003cli\u003eThe integrated 5G filter removes a potential source of interference without adding an external component\u003c\/li\u003e\n\u003cli\u003eStandard F connectors and mains power make installation and replacement quick\u003c\/li\u003e\n\u003cli\u003eCompact design fits neatly into a distribution cabinet or behind a TV rack\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56578548924798,"sku":"203228","price":18.85,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675098235262.webp?v=1779634942"},{"product_id":"johansson-kit-6714-profiler-revolution","title":"Johansson 6714 Profiler Revolution Filter Amplifier – 32 Filters, 5G LTE \u0026 Flex Matrix","description":"\u003cp\u003eThe Johansson KIT 6714 Profiler Revolution is a programmable filter amplifier and channel convertor for terrestrial signals. It takes VHF and UHF signals from up to 3 wideband inputs, filters them individually using up to 32 programmable filters with AGC, and outputs a combined signal on one main VHF-S-UHF output. The unit can also shift any input channel to any output channel in the VHF or UHF band via its Flex Matrix conversion, removing the need for separate conversion equipment.\u003c\/p\u003e\u003cp\u003eThe Profiler Revolution includes 5G LTE protection at 694MHz and can be locked with a security code to prevent unauthorised configuration changes. It is manufactured in Europe and the kit includes a power supply and instruction manual.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3 VHF\/UHF wideband inputs with 32 programmable filters and real-time AGC per multiplex\u003c\/li\u003e\n\u003cli\u003eFlex Matrix channel conversion — any VHF\/UHF input channel can be shifted to any VHF-S-UHF output channel\u003c\/li\u003e\n\u003cli\u003eProcesses and converts more than 50 channels (32 filters)\u003c\/li\u003e\n\u003cli\u003e5G LTE protection at 694MHz\u003c\/li\u003e\n\u003cli\u003eS-Band output channel processing capability\u003c\/li\u003e\n\u003cli\u003eSecurity code lock to prevent unauthorised setting changes\u003c\/li\u003e\n\u003cli\u003eRead-out of input signal levels — no field strength meter required\u003c\/li\u003e\n\u003cli\u003eRemote power for pre-amplifier: 12V or 24V, 50mA total across 3 inputs\u003c\/li\u003e\n\u003cli\u003eMade in Europe\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e50 dB selectivity on adjacent channels eliminates interference from nearby frequencies without external filters\u003c\/li\u003e\n\u003cli\u003eReal-time AGC on each multiplex independently maintains stable output levels even as input signal strength varies\u003c\/li\u003e\n\u003cli\u003eFlex Matrix conversion allows the installer to reassign channel frequencies at the output, enabling full compatibility with existing TV distributions\u003c\/li\u003e\n\u003cli\u003eBuilt-in input level read-out saves the cost and time of a separate field strength meter during installation and troubleshooting\u003c\/li\u003e\n\u003cli\u003eSecurity code lock protects the configuration in shared or public installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson KIT 6714 Profiler Revolution\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 3 VHF\/UHF (wideband)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 main (VHF-S-UHF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput frequency range:\u003c\/strong\u003e VHF: 174–240MHz, UHF: 470–694MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput frequency range:\u003c\/strong\u003e 174–862MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLTE protection:\u003c\/strong\u003e 694MHz (5G)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput level:\u003c\/strong\u003e VHF: 37*–109 dBµV, UHF: 37*–109 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power (60dB\/IM3):\u003c\/strong\u003e 114 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power (36dB\/IM3):\u003c\/strong\u003e 125 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power with 1 MUX:\u003c\/strong\u003e 108 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power with 6 MUX:\u003c\/strong\u003e 108 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power with 15 MUX:\u003c\/strong\u003e 105 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput power with 32 MUX:\u003c\/strong\u003e 102 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdd channels:\u003c\/strong\u003e Per 1, 2, 3, 4, 5 or 6 MUXes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of channels:\u003c\/strong\u003e More than 50 (32 filters)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConversion:\u003c\/strong\u003e Yes — any VHF\/UHF channel to any VHF-S-UHF channel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e VHF: \u0026gt;65 dB, UHF: \u0026gt;65 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain adjustment:\u003c\/strong\u003e Channel AGC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGeneral attenuator:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF attenuator:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise figure:\u003c\/strong\u003e 7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSelectivity:\u003c\/strong\u003e 50 dB\/1MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput MER:\u003c\/strong\u003e VHF: 35 dB, UHF: 35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eESD protection:\u003c\/strong\u003e All inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote voltage for pre-amp:\u003c\/strong\u003e 12V or 24V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote current:\u003c\/strong\u003e 50mA total for 3 inputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e -5 to +50°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 9W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 12V (included)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAll-in-one programmable filtering, amplification, and conversion removes the need for multiple separate components in complex installations\u003c\/li\u003e\n\u003cli\u003eNo field strength meter required during setup — the unit displays input levels directly\u003c\/li\u003e\n\u003cli\u003eSecurity lock keeps settings intact after commissioning in multi-user buildings\u003c\/li\u003e\n\u003cli\u003eKit includes power supply and instruction manual so the unit is ready to install out of the box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56579000893822,"sku":"203415","price":207.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675194507646.webp?v=1779636662"},{"product_id":"gbs-elettronica-jolly-line-45980-5g-eu-κεντρικός-ενισχυτής-5","title":"GBS Jolly Line 45980\/5G-EU UHF Head-End Amplifier – 2-In\/1-Out, 40 dB Gain \u0026 5G Filter","description":"\u003cp\u003eThe Jolly Line 45980\/5G-EU is a compact UHF multiband amplifier built for central antenna installations. It accepts two independent UHF inputs and combines them into a single output, providing 40 dB of gain per channel across the 470–694 MHz terrestrial broadcast band. The integrated 5G filter attenuates signals from 694 to 862 MHz, protecting the TV distribution network from mobile network interference.\u003c\/p\u003e\u003cp\u003eThe amplifier operates from a wide-range AC supply (90–250 Vac) and includes automatic 12 Vdc tele-power feed for remote powering of upstream components. Power consumption is 2.5 W. European certification is included.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo independent UHF inputs, one combined output\u003c\/li\u003e\n\u003cli\u003e40 dB gain per UHF channel (UHF 1 and UHF 2)\u003c\/li\u003e\n\u003cli\u003eUHF operating frequency: 470–694 MHz\u003c\/li\u003e\n\u003cli\u003eIntegrated 5G filter: attenuation \u0026gt;20 dB from 694–862 MHz\u003c\/li\u003e\n\u003cli\u003eIntegrated 4G filter coverage: 694–790 MHz\u003c\/li\u003e\n\u003cli\u003eAdjustable gain per UHF band: 20–40 dB\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 115 dBµV\u003c\/li\u003e\n\u003cli\u003eAutomatic tele-power supply: 12 Vdc \/ 90 mA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 40 dB per-channel gain compensates for long cable runs and high split-loss in large distribution networks\u003c\/li\u003e\n\u003cli\u003eThe built-in 5G filter prevents LTE 700 band interference from degrading UHF channel reception without requiring a separate external filter\u003c\/li\u003e\n\u003cli\u003eTwo independent UHF inputs allow combining signals from two separate antenna positions or frequency groups at a single head-end point\u003c\/li\u003e\n\u003cli\u003eAutomatic tele-power feed eliminates the need for a separate power injector for remotely powered antennas or LNBs upstream\u003c\/li\u003e\n\u003cli\u003eWide-range AC supply (90–250 Vac) ensures compatibility across different mains voltages without modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e UHF 1: 40 dB, UHF 2: 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Frequency:\u003c\/strong\u003e 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Filter:\u003c\/strong\u003e 694–862 MHz, attenuation \u0026gt;20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4G Filter:\u003c\/strong\u003e 694–790 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain Adjustment per UHF Band:\u003c\/strong\u003e 20–40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Output:\u003c\/strong\u003e 115 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 8.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTele-Power Supply:\u003c\/strong\u003e Automatic, 12 Vdc \/ 90 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC Power Supply:\u003c\/strong\u003e 90–250 Vac, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 2.5 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompact dimensions allow the unit to fit in standard head-end enclosures without requiring additional space\u003c\/li\u003e\n\u003cli\u003eThe combined 5G and 4G filter coverage addresses both current and legacy interference bands in a single device\u003c\/li\u003e\n\u003cli\u003ePer-band gain adjustment lets the installer balance the two input levels to achieve a flat combined output spectrum\u003c\/li\u003e\n\u003cli\u003eEuropean certification confirms compliance with EU electromagnetic compatibility and safety directives\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56579160113534,"sku":"203330","price":58.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675232747902.webp?v=1779637644"},{"product_id":"gbs-elettronica-jolly-line-45979-5g-eu-multiband-amplifier-5","title":"GBS Jolly Line 45979\/5G-EU UHF Multiband Amplifier – 30 dB, 5G Filter \u0026 12 V Tele-Power","description":"\u003cp\u003eThe Jolly Line 45979\/5G-EU is a compact UHF multiband amplifier built for central antenna head-end installations. It accepts two independent UHF inputs and combines them into a single output, providing 30 dB of gain per channel across the 470–694 MHz terrestrial broadcast band. The integrated 5G filter attenuates signals from 694 to 862 MHz, protecting the TV distribution network from mobile network interference.\u003c\/p\u003e\u003cp\u003eThe amplifier operates from a wide-range AC supply (90–250 Vac) and includes automatic 12 Vdc tele-power feed for remote powering of upstream components. Power consumption is 2 W. European certification is included.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo independent UHF inputs, one combined output\u003c\/li\u003e\n\u003cli\u003e30 dB gain per UHF channel (UHF 1 and UHF 2)\u003c\/li\u003e\n\u003cli\u003eUHF operating frequency: 470–694 MHz\u003c\/li\u003e\n\u003cli\u003eIntegrated 5G filter: attenuation \u0026gt;20 dB from 694–862 MHz\u003c\/li\u003e\n\u003cli\u003eIntegrated 4G filter coverage: 694–790 MHz\u003c\/li\u003e\n\u003cli\u003eAdjustable gain per UHF band: 10–30 dB\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 115 dBµV\u003c\/li\u003e\n\u003cli\u003eAutomatic tele-power supply: 12 Vdc \/ 90 mA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 30 dB per-channel gain compensates for cable losses and signal splitting in medium-scale distribution networks\u003c\/li\u003e\n\u003cli\u003eThe built-in 5G filter prevents LTE 700 band interference from degrading UHF channel reception without requiring a separate external filter\u003c\/li\u003e\n\u003cli\u003eTwo independent UHF inputs allow combining signals from two separate antenna positions or frequency groups at a single head-end point\u003c\/li\u003e\n\u003cli\u003eAutomatic tele-power feed eliminates the need for a separate power injector for remotely powered antennas upstream\u003c\/li\u003e\n\u003cli\u003eWide-range AC supply (90–250 Vac) ensures compatibility across different mains voltages without modification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e UHF 1: 30 dB, UHF 2: 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Frequency:\u003c\/strong\u003e 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Filter:\u003c\/strong\u003e 694–862 MHz, attenuation \u0026gt;20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4G Filter:\u003c\/strong\u003e 694–790 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain Adjustment per UHF Band:\u003c\/strong\u003e 10–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Output:\u003c\/strong\u003e 115 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 8.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTele-Power Supply:\u003c\/strong\u003e Automatic, 12 Vdc \/ 90 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAC Power Supply:\u003c\/strong\u003e 90–250 Vac, 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 2 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompact dimensions allow the unit to fit in standard head-end enclosures without requiring additional space\u003c\/li\u003e\n\u003cli\u003eThe combined 5G and 4G filter coverage addresses both current and legacy interference bands in a single device\u003c\/li\u003e\n\u003cli\u003ePer-band gain adjustment lets the installer balance the two input levels to achieve a flat combined output spectrum\u003c\/li\u003e\n\u003cli\u003eEuropean certification confirms compliance with EU electromagnetic compatibility and safety directives\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56579173613950,"sku":"203329","price":56.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675236942206.webp?v=1779637801"},{"product_id":"jolly-line-41050-al-450-2u-power-supply-html","title":"GBS Jolly Line 41050 AL\/450 2U Mast Amp PSU – 12 V 450 mA, 2× F-Type \u0026 4 dB Loss","description":"\u003cp\u003eThe Jolly Line 41050 AL\/450 2U is a 230V mains-powered insertion power supply with two Type F outputs for feeding DC power to a mast-mounted antenna amplifier over the coaxial cable. It outputs 12V at a maximum current of 450mA and introduces 4 dB of signal attenuation in the coaxial path. An LED indicator confirms that the unit is powered and operating.\u003c\/p\u003e\u003cp\u003eIt is designed to work with the Jolly Line 45129 CST\/VU2 2OUT Mast Amplifier LTE\/4G, providing a complete mast amplifier system for terrestrial antenna installations. The compact 7×14×4cm housing fits easily in a distribution cabinet or beside the TV point.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e2 Type F output connectors for dual-feed coaxial distribution\u003c\/li\u003e\n\u003cli\u003eOutput voltage: 12V DC\u003c\/li\u003e\n\u003cli\u003eMaximum output current: 450mA\u003c\/li\u003e\n\u003cli\u003eSignal attenuation: 4 dB\u003c\/li\u003e\n\u003cli\u003eLED power indicator\u003c\/li\u003e\n\u003cli\u003eNetwork (mains) voltage: 230V\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDual Type F outputs allow power to be fed to the mast amplifier while the signal path remains uninterrupted for two coaxial lines\u003c\/li\u003e\n\u003cli\u003e450mA maximum current is sufficient for the Jolly Line 45129 mast amplifier and similar LTE\/4G-filtered units\u003c\/li\u003e\n\u003cli\u003eLED indicator provides instant visual confirmation of power supply status without opening the cabinet\u003c\/li\u003e\n\u003cli\u003e4 dB attenuation is the expected insertion loss for this type of power inserter, preserving signal integrity\u003c\/li\u003e\n\u003cli\u003eCompact 7×14×4cm size fits in standard cable TV distribution points\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Jolly Line 41050 AL\/450 2U\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Type F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Outputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNetwork Voltage:\u003c\/strong\u003e 230V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e 12V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Current:\u003c\/strong\u003e 450mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation:\u003c\/strong\u003e 4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLED Indicator:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage Dimensions:\u003c\/strong\u003e 7×14×4cm (L×W×H)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 0.200kg\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePlug-and-play power inserter for the Jolly Line 45129 mast amplifier — no additional wiring or adapters required\u003c\/li\u003e\n\u003cli\u003eLED status light lets you verify operation at a glance from across the room\u003c\/li\u003e\n\u003cli\u003eTwo outputs serve dual-path antenna distributions in a single, compact unit\u003c\/li\u003e\n\u003cli\u003ePackage includes 1× Jolly Line 41050 AL\/450 2U Power Supply\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56579189539198,"sku":"219098","price":9.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675242643838.webp?v=1779638028"},{"product_id":"gbs-elettronica-jolly-line-jl45497-5g-pole-amplifier","title":"Jolly Line JL45497\/5G UHF Mast Amplifier Kit – 15–30 dB, 2 Outputs \u0026 5G Filter","description":"\u003cp\u003eThe Jolly Line JL45497\/5G is a mast-mounted UHF amplifier supplied as a complete kit. It amplifies signals in the 470–694 MHz band with an adjustable gain of 15 to 30 dB and a maximum output signal level of 107 dBµV. A built-in 5G filter rejects interference from the 694–862 MHz band.\u003c\/p\u003e\u003cp\u003eThe kit includes a separate power supply unit with F-type connection, two distribution outputs, and 4 dB attenuation. The power supply runs from 230 Vac mains and delivers +12 Vdc to the amplifier head via the coaxial cable, with a maximum current of 200 mA.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUHF amplifier head for 470–694 MHz with built-in 5G filter (694–862 MHz)\u003c\/li\u003e\n\u003cli\u003eAdjustable gain: 15–30 dB\u003c\/li\u003e\n\u003cli\u003eMaximum signal output: 107 dBµV\u003c\/li\u003e\n\u003cli\u003e1 antenna input on the amplifier head; 1 coaxial output\u003c\/li\u003e\n\u003cli\u003ePower supply unit with F connection, 2 distribution outputs, 4 dB attenuation\u003c\/li\u003e\n\u003cli\u003eMains voltage: 230 Vac; output voltage: +12 Vdc\u003c\/li\u003e\n\u003cli\u003eMaximum current: 200 mA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe built-in 5G filter prevents overloading from strong 5G mobile signals without needing a separate external filter\u003c\/li\u003e\n\u003cli\u003eA 15–30 dB adjustable gain range allows the installer to tune the amplifier to the local signal level and avoid over-amplification\u003c\/li\u003e\n\u003cli\u003eThe 107 dBµV maximum output level supports multi-outlet distribution without signal degradation at the end points\u003c\/li\u003e\n\u003cli\u003ePower is supplied via the coaxial cable from the power supply unit, so no separate mains feed is required at the mast head\u003c\/li\u003e\n\u003cli\u003eThe two-output power supply unit provides immediate two-way signal distribution without an additional splitter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Frequency (UHF):\u003c\/strong\u003e 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Filter:\u003c\/strong\u003e 694–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Gain (UHF):\u003c\/strong\u003e 15–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Outputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Signal Output:\u003c\/strong\u003e 107 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Connection:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply Connection:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply Outputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply Attenuation:\u003c\/strong\u003e 4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMains Voltage:\u003c\/strong\u003e 230 Vac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e +12 Vdc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Current:\u003c\/strong\u003e 200 mA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe complete kit includes both the amplifier head and power supply unit — all that is needed for a full mast-mount installation\u003c\/li\u003e\n\u003cli\u003eF-type connections on all ports ensure compatibility with standard coaxial infrastructure\u003c\/li\u003e\n\u003cli\u003eThe 5G filter is integrated at the factory, reducing the number of components the installer has to handle on the mast\u003c\/li\u003e\n\u003cli\u003eCoaxial power delivery from the indoor supply unit to the outdoor amplifier keeps the installation clean — no outdoor power point required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56579192521086,"sku":"203126","price":22.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675243168126.webp?v=1779638054"},{"product_id":"gbs-elettronica-jolly-line-jl45498-5g-pole-amplifier","title":"Jolly Line JL45498\/5G Pole TV Amplifier Kit – 3-Input V+U+U, 5G Filter \u0026 F-Type","description":"\u003cp\u003eThe Jolly Line JL45498\/5G is a pole-mount TV signal amplifier accepting three inputs — one VHF and two UHF — and providing two outputs through its integrated power supply. The built-in 5G filter blocks the 694–862 MHz band, preventing interference from 5G mobile networks on UHF reception.\u003c\/p\u003e\u003cp\u003eThe amplifier uses F-type connections throughout and offers independent gain adjustment on each band: up to 30 dB on each UHF input and up to 22 dB on VHF. It is intended for residential or small-building aerial systems where two UHF and one VHF source need combining and amplifying at the mast.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3-input configuration: VHF + UHF1 + UHF2\u003c\/li\u003e\n\u003cli\u003e2 power supply outputs via F-type connection\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5G filter covering 694–862 MHz\u003c\/li\u003e\n\u003cli\u003eUHF frequency range: 470–694 MHz (per input)\u003c\/li\u003e\n\u003cli\u003eVHF frequency range: 47–232 MHz\u003c\/li\u003e\n\u003cli\u003eIndependent gain controls: UHF1 10–30 dB, UHF2 10–30 dB, VHF 2–22 dB\u003c\/li\u003e\n\u003cli\u003eMaximum signal output: 107 dBµV\u003c\/li\u003e\n\u003cli\u003eF-type connectors throughout\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe built-in 5G filter eliminates the need for a separate external filter, reducing installation complexity and cost\u003c\/li\u003e\n\u003cli\u003eIndependent gain controls per band allow precise signal level balancing between the UHF and VHF sources at the mast\u003c\/li\u003e\n\u003cli\u003eThe 4 dB attenuation on the power supply output limits back-feed into the distribution network\u003c\/li\u003e\n\u003cli\u003eMaximum 200 mA current capacity from the 12 Vdc output is sufficient to power a standard LNB or a remote distribution device\u003c\/li\u003e\n\u003cli\u003ePole mounting positions the amplifier close to the aerial, minimising cable loss before amplification\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 3 (VHF + UHF + UHF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Frequency:\u003c\/strong\u003e 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF Frequency:\u003c\/strong\u003e 47–232 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Filter Range:\u003c\/strong\u003e 694–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF1 Gain:\u003c\/strong\u003e 10–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF2 Gain:\u003c\/strong\u003e 10–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF Gain:\u003c\/strong\u003e 2–22 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Signal Output:\u003c\/strong\u003e 107 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation:\u003c\/strong\u003e 4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMains Voltage:\u003c\/strong\u003e 230 Vac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Voltage:\u003c\/strong\u003e +12 Vdc\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Current:\u003c\/strong\u003e 200 mA\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe kit ships as a complete pole amplifier assembly — no additional power injector or filter required\u003c\/li\u003e\n\u003cli\u003eF-type connections are the standard in TV aerial systems, ensuring straightforward cable termination with common tools\u003c\/li\u003e\n\u003cli\u003eThe dual UHF input lets you combine signals from two separate aerials — for example, two differently-oriented UHF aerials — into one distribution network\u003c\/li\u003e\n\u003cli\u003eThe 5G filter is passive and always active, requiring no configuration after installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56579213197694,"sku":"203127","price":23.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675250409854.webp?v=1779638336"},{"product_id":"gbs-elettronica-jolly-line-45982-multiband-amplifier-5g","title":"Jolly Line 45982 Central Multiband TV Amplifier – 4-Input VHF\/IV\/V\/UHF, 5G Filter","description":"\u003cp\u003eThe Jolly Line 45982 is a multiband TV amplifier intended for central antenna system installations. It accepts four independent signal inputs — VHF, Band IV, Band V, and UHF — and delivers two outputs, one of which is a test output for monitoring. A built-in 5G filter covering 694–862 MHz suppresses out-of-band interference from 5G networks.\u003c\/p\u003e\u003cp\u003eThe amplifier offers front-panel gain controls on all four bands, keeping the output level consistent across different signal environments while maintaining low power consumption of 7 W. It supports both digital and analogue terrestrial channels across all supported bands.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4 inputs: VHF, Band IV, Band V, UHF\u003c\/li\u003e\n\u003cli\u003e2 outputs: 1 main + 1 test output\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5G filter: 694–862 MHz, 20 dB attenuation\u003c\/li\u003e\n\u003cli\u003eBuilt-in 4G filter: 694–790 MHz\u003c\/li\u003e\n\u003cli\u003eFront-panel gain controls on all four bands\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 115 dBµV\u003c\/li\u003e\n\u003cli\u003eNoise figure: 5 dB\u003c\/li\u003e\n\u003cli\u003eF-type connectors\u003c\/li\u003e\n\u003cli\u003ePower supply: 90–250Vac, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003eConsumption: 7 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIndependent gain controls per band allow signal level equalisation across VHF, Band IV, Band V, and UHF without external attenuators\u003c\/li\u003e\n\u003cli\u003eThe built-in 5G filter (20 dB) and 4G filter eliminate interference from mobile networks, protecting reception quality after spectrum reallocation\u003c\/li\u003e\n\u003cli\u003eThe test output allows signal level monitoring during commissioning or fault diagnosis without disconnecting the main distribution feed\u003c\/li\u003e\n\u003cli\u003eLow 7 W power consumption reduces operating costs in always-on central antenna systems\u003c\/li\u003e\n\u003cli\u003eThe wide power supply range (90–250Vac) makes the unit compatible with different mains standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 (VHF, Band IV, Band V, UHF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1 + 1 test\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF Frequency:\u003c\/strong\u003e 47–230 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand IV Frequency:\u003c\/strong\u003e 470–590 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand V Frequency:\u003c\/strong\u003e 590–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Frequency:\u003c\/strong\u003e 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Filter:\u003c\/strong\u003e 694–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e4G Filter:\u003c\/strong\u003e 694–790 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF Gain:\u003c\/strong\u003e 25 dB (adjustable 5–25 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand IV Gain:\u003c\/strong\u003e 35 dB (adjustable 15–35 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand V Gain:\u003c\/strong\u003e 35 dB (adjustable 15–35 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Gain:\u003c\/strong\u003e 35 dB (adjustable 15–35 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Attenuation:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Output:\u003c\/strong\u003e 115 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 90–250Vac, 50\/60Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 7 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe test output means you can check signal levels at the amplifier during installation or maintenance without interrupting service to the distribution network\u003c\/li\u003e\n\u003cli\u003eFront-panel controls are accessible without opening the unit or using a laptop, speeding up on-site level adjustment\u003c\/li\u003e\n\u003cli\u003eThe dual 5G and 4G filtering protects installations against interference in markets where both frequency bands have been reallocated to mobile operators\u003c\/li\u003e\n\u003cli\u003eAt only 7 W the amplifier can run continuously without significant contribution to energy costs in a central equipment room\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56579213230462,"sku":"203331","price":59.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675250442622.webp?v=1779638341"},{"product_id":"johansson-kit-7332dc-2436-5g-web-amplifier","title":"Johansson KIT 7332DC\/2436 5G UHF Web Amplifier – 470-694 MHz, 34 dB Gain \u0026 GSM\/LTE Trap","description":"\u003cp\u003eThe Johansson KIT 7332DC\/2436 (5G) is a UHF web amplifier housed in a protective enclosure that insulates the amplifier module and shields it from moisture. It covers the 470–694 MHz UHF band with an integrated GSM\/LTE trap to suppress interference from 4G and 5G mobile signals.\u003c\/p\u003e\u003cp\u003eThe kit includes a 24 V DC power supply with one output. Gain is adjustable using the onboard potentiometer, allowing the installer to fine-tune the amplification level to match the local signal environment. The amplifier delivers a low noise figure of 2 dB and a maximum output level of 108 dBmV.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUHF band web amplifier, 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e1 input, 1 output\u003c\/li\u003e\n\u003cli\u003eAdjustable gain: 10–34 dB via potentiometer (up to 40 dB)\u003c\/li\u003e\n\u003cli\u003eNoise figure: 2 dB\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 108 dBmV\u003c\/li\u003e\n\u003cli\u003eIntegrated GSM\/LTE trap for 5G interference rejection\u003c\/li\u003e\n\u003cli\u003eHoused in a protective weatherproof enclosure\u003c\/li\u003e\n\u003cli\u003eSupplied with 24 V DC power supply\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe protective enclosure shields the amplifier from moisture and physical damage, extending service life in outdoor or semi-outdoor installations\u003c\/li\u003e\n\u003cli\u003eThe built-in GSM\/LTE trap actively rejects mobile network interference across the GSM and LTE bands without requiring a separate filter\u003c\/li\u003e\n\u003cli\u003eAdjustable gain with the potentiometer lets installers optimise signal level for each site rather than accepting a fixed amplification\u003c\/li\u003e\n\u003cli\u003eA noise figure of 2 dB preserves signal quality even when the input signal is weak\u003c\/li\u003e\n\u003cli\u003e108 dBmV maximum output level supports distribution to multiple receivers downstream\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Web\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 10–34 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e 108 dBmV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGSM\/LTE Trap:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 65 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 24 V DC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe complete kit format — amplifier in protective box plus power supply — means no separate sourcing of components before installation\u003c\/li\u003e\n\u003cli\u003eThe 5G-ready GSM\/LTE trap keeps the system future-proof as mobile networks expand in the UHF band\u003c\/li\u003e\n\u003cli\u003ePotentiometer gain adjustment is accessible without dismantling the installation, simplifying on-site optimisation\u003c\/li\u003e\n\u003cli\u003eLow 65 mA consumption keeps running costs minimal across the amplifier's service life\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56579263463806,"sku":"203165","price":33.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675271840126.webp?v=1779639247"},{"product_id":"johansson-7722l-vhf-uhf-line-amplifier-lte-4g","title":"Johansson 7722L VHF-UHF Line Amplifier – LTE\/4G Filter, 2 Outputs \u0026 Adjustable Gain","description":"\u003cp\u003eThe Johansson 7722L is a mains-powered line amplifier designed for terrestrial TV distribution installations. It accepts a single dual-band input covering VHF (40–320 MHz) and UHF (470–790 MHz) simultaneously, and splits the signal to two outputs. LTE\/4G filtering is built in to suppress interference from mobile network frequencies.\u003c\/p\u003e\u003cp\u003eVHF gain is adjustable from 15 to 30 dB and UHF gain from 18 to 28 dB, each independently controlled. Remote power feed (24V \/ 55mA) is switchable, allowing the amplifier to supply passive head-end or mast-mounted components. The unit is mountable on a wall or on a DIN rail.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle dual-band input: 40–320 MHz (VHF) + 470–790 MHz (UHF)\u003c\/li\u003e\n\u003cli\u003e2 outputs\u003c\/li\u003e\n\u003cli\u003eAdjustable VHF gain: 15–30 dB\u003c\/li\u003e\n\u003cli\u003eAdjustable UHF gain: 18–28 dB\u003c\/li\u003e\n\u003cli\u003eLTE\/4G filtering built in\u003c\/li\u003e\n\u003cli\u003eSwitchable remote power: 24V \/ 55mA\u003c\/li\u003e\n\u003cli\u003ePower LED indicator\u003c\/li\u003e\n\u003cli\u003eWall or DIN rail mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIndependent VHF and UHF gain adjustment allows the signal level on each band to be optimised for the specific installation without affecting the other band\u003c\/li\u003e\n\u003cli\u003eA maximum output level of 107 dBµV supports long cable runs and multi-outlet distributions before signal level drops to unusable levels\u003c\/li\u003e\n\u003cli\u003eThe built-in LTE\/4G filter prevents mobile network interference from degrading UHF reception — particularly important in areas with dense 4G coverage\u003c\/li\u003e\n\u003cli\u003eSwitchable remote power enables the amplifier to feed a mast LNB or antenna pre-amplifier directly, eliminating the need for a separate power inserter\u003c\/li\u003e\n\u003cli\u003eA noise figure of 3.0 dB typical ensures minimal signal degradation at the input stage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 7722L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Frequency Range:\u003c\/strong\u003e 40–320 MHz + 470–790 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Outputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable VHF Gain:\u003c\/strong\u003e 15–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustable UHF Gain:\u003c\/strong\u003e 18–28 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 3.0 dB typ.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e 107 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (input\/output):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Between Outputs:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power:\u003c\/strong\u003e 24V \/ 55mA (switchable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMains Power:\u003c\/strong\u003e 230V~ \/ 6.9 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Wall or DIN rail\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWall and DIN rail mounting compatibility means the amplifier fits into existing distribution boards and purpose-built enclosures without extra brackets\u003c\/li\u003e\n\u003cli\u003eThe LED power indicator gives immediate visual confirmation that the unit is energised and the remote power feed is active\u003c\/li\u003e\n\u003cli\u003eBoth VHF and UHF are handled by a single unit, avoiding the need for separate band amplifiers and combiners in mixed-frequency installations\u003c\/li\u003e\n\u003cli\u003eThe package includes safety instructions, covering the documentation requirements for professional installation compliance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56579871900030,"sku":"203214","price":19.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675337671038.webp?v=1779641608"},{"product_id":"gbs-elettronica-jolly-line-45157-5g-ams2-2out-2u-line-amplif","title":"GBS Jolly Line AMS2\/2OUT 5G VHF-UHF Amplifier – 2 Outputs, 5G Filter \u0026 8-23 dB","description":"\u003cp\u003eThe GBS Elettronica Jolly line 45157\/5G AMS2\/2OUT 2U is a mains-powered VHF-UHF distribution amplifier designed for antenna systems that require signal splitting to two output points. Its integrated 5G filter suppresses transmissions in the 694–862 MHz range, ensuring clean terrestrial signal delivery as 5G networks roll out in the UHF spectrum.\u003c\/p\u003e\u003cp\u003eBoth the VHF and UHF gain stages are independently adjustable, allowing installers to balance signal levels between bands to suit each installation. A power LED provides immediate visual confirmation that the unit is energised.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle input, two-output VHF-UHF line amplifier\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5G filter covering 694–862 MHz\u003c\/li\u003e\n\u003cli\u003eIndependently adjustable VHF gain: 8–23 dB\u003c\/li\u003e\n\u003cli\u003eIndependently adjustable UHF gain: 8–23 dB\u003c\/li\u003e\n\u003cli\u003eF-type connectors on all ports\u003c\/li\u003e\n\u003cli\u003ePower LED indicator for operational status confirmation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe built-in 5G filter eliminates interference from 5G transmitters sharing the upper UHF spectrum, with insertion loss below 20 dB in the filtered band\u003c\/li\u003e\n\u003cli\u003eIndependent per-band gain adjustment lets installers compensate for cable loss differences between VHF and UHF without external attenuators\u003c\/li\u003e\n\u003cli\u003eTwo outputs allow a single coaxial feed to serve two receivers or distribution points without additional passive splitters\u003c\/li\u003e\n\u003cli\u003eF-connector standard ensures compatibility with all typical satellite and terrestrial coaxial cabling\u003c\/li\u003e\n\u003cli\u003eMains power supply removes the need for external injectors or in-line power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Jolly line 45157\/5G AMS2\/2OUT 2U\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF Frequency Range:\u003c\/strong\u003e 47–240 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Frequency Range:\u003c\/strong\u003e 470–694 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Filter Range:\u003c\/strong\u003e 694–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF Gain (adjustable):\u003c\/strong\u003e 8–23 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Gain (adjustable):\u003c\/strong\u003e 8–23 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Insertion Loss:\u003c\/strong\u003e \u0026lt;20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e 107 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Consumption:\u003c\/strong\u003e 45 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 220–230 Vac \/ 50 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFuture-proofed for 5G co-existence — the integrated filter works without any configuration or additional components\u003c\/li\u003e\n\u003cli\u003eThe wide adjustable gain range (8–23 dB per band) covers both short cable runs and longer distribution lines from a single unit\u003c\/li\u003e\n\u003cli\u003eStandard F connectors mean no adapters are needed when connecting to existing coaxial infrastructure\u003c\/li\u003e\n\u003cli\u003eCompact 2U format fits in standard equipment enclosures alongside other distribution hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56579874652542,"sku":"203229","price":18.85,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675337965950.webp?v=1779641617"},{"product_id":"gbs-elettronica-jolly-line-jl45159-5g-ams2-4out-line-amplifi","title":"GBS Elettronica JL45159\/5G AMS2\/4OUT VHF-UHF Line Amplifier – 5G Filter, 5-20 dB Gain","description":"\u003cp\u003eThe GBS Elettronica Jolly Line JL45159\/5G is a mains-powered VHF–UHF line amplifier with 1 input and 4 outputs. It covers VHF frequencies from 47 to 230 MHz and UHF from 470 to 790 MHz, and includes an integrated 5G interference filter that suppresses frequencies in the 694–862 MHz 5G band.\u003c\/p\u003e\u003cp\u003eGain on both VHF and UHF bands is independently adjustable between 5 and 20 dB, allowing the installer to compensate for cable losses in each run. A power LED provides clear status indication.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input, 4 outputs\u003c\/li\u003e\n\u003cli\u003eVHF frequency range: 47–230 MHz\u003c\/li\u003e\n\u003cli\u003eUHF frequency range: 470–790 MHz\u003c\/li\u003e\n\u003cli\u003eIntegrated 5G filter: suppresses 694–862 MHz\u003c\/li\u003e\n\u003cli\u003e5G filter insertion loss: less than 20 dB\u003c\/li\u003e\n\u003cli\u003eAdjustable VHF gain: 5–20 dB\u003c\/li\u003e\n\u003cli\u003eAdjustable UHF gain: 5–20 dB\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 107 dBµV\u003c\/li\u003e\n\u003cli\u003ePower LED indicator\u003c\/li\u003e\n\u003cli\u003eF connector type\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe integrated 5G filter removes interference from 5G mobile networks without requiring a separate external filter\u003c\/li\u003e\n\u003cli\u003eIndependent gain adjustment on VHF and UHF allows precise compensation for different cable lengths per output\u003c\/li\u003e\n\u003cli\u003e4 outputs in a single unit eliminates the need for a separate splitter downstream\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance and F connectors are standard for terrestrial antenna systems, ensuring compatibility with existing infrastructure\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e JL45159\/5G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfiguration:\u003c\/strong\u003e 1 input, 4 outputs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF Frequency:\u003c\/strong\u003e 47–230 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Frequency:\u003c\/strong\u003e 470–790 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Filter Range:\u003c\/strong\u003e 694–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e5G Filter Insertion Loss:\u003c\/strong\u003e less than 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVHF Gain (adjustable):\u003c\/strong\u003e 5–20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUHF Gain (adjustable):\u003c\/strong\u003e 5–20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Output Level:\u003c\/strong\u003e 107 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e F\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent Consumption:\u003c\/strong\u003e 45 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 220–230 Vac \/ 50 Hz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA single unit amplifies and distributes the signal to 4 rooms — no additional splitter required\u003c\/li\u003e\n\u003cli\u003eAdjustable gain per band means the amplifier adapts to installations where VHF and UHF cable losses differ\u003c\/li\u003e\n\u003cli\u003eThe built-in 5G filter future-proofs the installation against 5G interference in the 694–862 MHz band\u003c\/li\u003e\n\u003cli\u003eMains-powered operation via 220–230V AC ensures stable amplification without relying on phantom power from a receiver\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBS Elettronica","offers":[{"title":"Default Title","offer_id":56579911385470,"sku":"203230","price":25.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675352023422.webp?v=1779642216"}],"url":"https:\/\/lynk.gr\/en-us\/collections\/tv-antenna-amplifiers.oembed","provider":"Lynk.gr","version":"1.0","type":"link"}