{"title":"TV \u0026 Audio","description":"\u003cp\u003eBrowse our complete range of TV mounts, antennas, satellite receivers and audio equipment at Lynk.gr. Choose from TV wall mounts, satellite dishes, soundbars, Bluetooth speakers, headphones and amplifiers sourced from leading brands, with fast delivery and certified quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFree shipping across Greece on orders over €80.\u003c\/strong\u003e\u003c\/p\u003e","products":[{"product_id":"sab-satellite-of100-slp","title":"SAB Satellite OF100 SLP 100 cm Offset Dish – 38.9-39.8 dB Gain, Perforated \u0026 Steel","description":"\u003cp\u003eThe SAB Satellite OF100 SLP is a 100 cm offset satellite dish designed for demanding outdoor use. It is available in two colours — Grey and Anthracite — giving installers flexibility to match rooftop or facade aesthetics.\u003c\/p\u003e\u003cp\u003eThe dish features an aluminum arm and a galvanized back with two claws for a strong, secure attachment to mast and base. Its perforated surface reduces wind load and helps maintain signal quality under adverse weather conditions.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e100 cm offset-type dish with a 26° offset angle\u003c\/li\u003e\n\u003cli\u003ePerforated dish surface for wind resistance and optimum signal reception\u003c\/li\u003e\n\u003cli\u003eAluminum LNB support arm with 40 mm LNB holder\u003c\/li\u003e\n\u003cli\u003eGalvanized steel back with two claws for rigid mast and base mounting\u003c\/li\u003e\n\u003cli\u003eAvailable in Light Grey and Anthracite finishes\u003c\/li\u003e\n\u003cli\u003eAdjustable elevation range: 18° – 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe perforated surface minimises wind load, keeping the dish aligned in high-wind conditions up to 90 km\/h operational and 150 km\/h survival\u003c\/li\u003e\n\u003cli\u003eZinc phosphated steel construction with polyester powder coating resists corrosion over long outdoor service life\u003c\/li\u003e\n\u003cli\u003eThe 38.9–39.8 dB dish gain delivers strong signal capture across the full Ku-band reception range\u003c\/li\u003e\n\u003cli\u003eTwo-colour availability lets installers choose the finish that blends with the building exterior\u003c\/li\u003e\n\u003cli\u003eWide elevation adjustment (18°–70°) accommodates a broad range of geographic latitudes and satellite positions\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset Angle:\u003c\/strong\u003e 26°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReception Frequency:\u003c\/strong\u003e 10.700 – 12.750 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Gain:\u003c\/strong\u003e 38.9–39.8 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc Phosphated Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Coat:\u003c\/strong\u003e Polyester Powder Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Axis Diameter:\u003c\/strong\u003e 87 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Axis Diameter:\u003c\/strong\u003e 97 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Holder:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Feed:\u003c\/strong\u003e 0.618\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Temperature:\u003c\/strong\u003e -40° to +60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Wind:\u003c\/strong\u003e 90 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurvival Wind:\u003c\/strong\u003e 150 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevation:\u003c\/strong\u003e 18° – 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAll mounting hardware is integrated — aluminum arm and galvanized back with claws ship as a complete assembly\u003c\/li\u003e\n\u003cli\u003eThe powder-coated steel surface requires no additional weatherproofing after installation\u003c\/li\u003e\n\u003cli\u003eThe 40 mm LNB holder is a standard size, compatible with the majority of universal and twin LNBs on the market\u003c\/li\u003e\n\u003cli\u003eAnthracite colour option is ideal for dark-facade buildings where a grey dish would stand out\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SAB Satellite","offers":[{"title":"Black","offer_id":56518958350718,"sku":"201106","price":44.64,"currency_code":"EUR","in_stock":false},{"title":"Grey","offer_id":56518958383486,"sku":"201106","price":44.64,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658948755838.webp?v=1779626492"},{"product_id":"sab-satellite-of080-slp","title":"SAB Satellite OF080 SLP 80 cm Offset Dish – 37-38 dB Gain, Perforated \u0026 Dual-Claw Mount","description":"\u003cp\u003eThe SAB Satellite OF080 SLP is an 80 cm offset satellite dish built for permanent outdoor installation. Its perforated reflector design reduces wind load and maintains signal quality under adverse weather conditions.\u003c\/p\u003e\u003cp\u003eThe dish comes with an aluminium arm and a galvanised back panel secured by two claws, providing a firm, corrosion-resistant mount to masts and base structures. Available in Light Grey and Anthracite.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOffset parabolic reflector design with 26° offset angle\u003c\/li\u003e\n\u003cli\u003ePerforated surface for optimum reception under any weather condition\u003c\/li\u003e\n\u003cli\u003eAluminium arm with galvanised back panel and dual-claw mast clamp\u003c\/li\u003e\n\u003cli\u003eAvailable in two colours: Light Grey and Anthracite\u003c\/li\u003e\n\u003cli\u003ePolyester powder coat finish over zinc phosphated steel construction\u003c\/li\u003e\n\u003cli\u003eElevation adjustment range of 18° to 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePerforated dish reduces wind resistance, keeping the dish stable during high winds up to 90 km\/h operational and 150 km\/h survival\u003c\/li\u003e\n\u003cli\u003eGalvanised back with dual claws ensures a secure, rattle-free connection to mast or base\u003c\/li\u003e\n\u003cli\u003e37–38 dB dish gain delivers strong signal capture for Ku-band satellites\u003c\/li\u003e\n\u003cli\u003eWide elevation range allows installation across a broad range of geographic latitudes\u003c\/li\u003e\n\u003cli\u003ePowder coat finish protects against corrosion and UV degradation over extended outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset Angle:\u003c\/strong\u003e 26°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReception Frequency:\u003c\/strong\u003e 10.700 – 12.750 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Gain:\u003c\/strong\u003e 37–38 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc Phosphated Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Coat:\u003c\/strong\u003e Polyester Powder Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light Grey (also available in Anthracite)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Axis Diameter:\u003c\/strong\u003e 70 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Axis Diameter:\u003c\/strong\u003e 77 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Holder:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Feed:\u003c\/strong\u003e 0.618\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Temperature:\u003c\/strong\u003e -40° to +60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Wind:\u003c\/strong\u003e 90 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurvival Wind:\u003c\/strong\u003e 150 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevation:\u003c\/strong\u003e 18° – 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo colour options let you choose the finish that best matches your building's exterior\u003c\/li\u003e\n\u003cli\u003eDual-claw galvanised mount makes installation straightforward with standard mast hardware\u003c\/li\u003e\n\u003cli\u003eCompact 70 × 77 cm footprint fits balconies and restricted mounting locations\u003c\/li\u003e\n\u003cli\u003eWide operating temperature range means no seasonal performance degradation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SAB Satellite","offers":[{"title":"Black","offer_id":56518959432062,"sku":"201105","price":38.9,"currency_code":"EUR","in_stock":false},{"title":"Grey","offer_id":56518959464830,"sku":"201105","price":38.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658949280126.webp?v=1779626497"},{"product_id":"other-p240-al","title":"P240 AL 240 cm Aluminium Parabolic Satellite Dish – One-Piece, 47.9 dB Gain \u0026 Ku-Band","description":"\u003cp\u003eThe P240 AL is a 240 cm parabolic satellite dish manufactured as a single aluminium piece with no additional add-on sections. Its one-piece construction improves structural rigidity and ensures the reflector surface holds its precise parabolic shape over years of outdoor exposure.\u003c\/p\u003e\u003cp\u003eThe large 240 cm aperture targets difficult satellite beams where smaller dishes cannot achieve reliable signal levels. It is finished in Light Grey polyester powder coat and is sized identically on both axes, making it a true circular dish.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle-piece aluminium construction — no assembly joints to loosen or corrode\u003c\/li\u003e\n\u003cli\u003e240 cm aperture on both axes (circular dish profile)\u003c\/li\u003e\n\u003cli\u003eParabolic reflector type for maximum signal focus\u003c\/li\u003e\n\u003cli\u003e40 mm LNB holder for standard universal LNBs\u003c\/li\u003e\n\u003cli\u003eLight Grey polyester powder-coat finish\u003c\/li\u003e\n\u003cli\u003eAdjustable elevation: 18° – 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe all-aluminium build keeps weight manageable for a dish of this size while resisting rust without additional treatment\u003c\/li\u003e\n\u003cli\u003e47.9 dB dish gain captures weak transponders and marginal beams that fall outside the footprint of smaller dishes\u003c\/li\u003e\n\u003cli\u003eOne-piece design eliminates alignment errors between panels that can reduce effective gain on multi-piece dishes\u003c\/li\u003e\n\u003cli\u003eLNB Feed ratio of 0.333 is optimised for the large focal length of this reflector, minimising spill-over loss\u003c\/li\u003e\n\u003cli\u003eRated for winds up to 90 km\/h in operation and 150 km\/h for survival, suiting exposed rooftop installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Parabolic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReception Frequency:\u003c\/strong\u003e 10.700 – 12.750 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Gain:\u003c\/strong\u003e 47.9 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Coat:\u003c\/strong\u003e Polyester Powder Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Axis Diameter:\u003c\/strong\u003e 240 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Axis Diameter:\u003c\/strong\u003e 240 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Holder:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Feed:\u003c\/strong\u003e 0.333\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Temperature:\u003c\/strong\u003e -40° to +60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Wind:\u003c\/strong\u003e 90 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurvival Wind:\u003c\/strong\u003e 150 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevation:\u003c\/strong\u003e 18° – 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo panels to align during installation — the single-piece reflector arrives ready to mount\u003c\/li\u003e\n\u003cli\u003eAluminium surface does not require painting or re-coating after installation\u003c\/li\u003e\n\u003cli\u003eThe 40 mm LNB holder is the industry standard size, accepting the widest range of available LNBs\u003c\/li\u003e\n\u003cli\u003eWide elevation adjustment range of 18°–70° makes the dish usable from equatorial to high-latitude installation sites\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Grey","offer_id":56518960480638,"sku":"201118","price":1950.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658949575038.webp?v=1779614517"},{"product_id":"sab-satellite-of080-sl","title":"SAB Satellite OF080 SL 80 cm Offset Dish – 37-38 dB Gain, Aluminium Arm \u0026 Dual-Claw Mount","description":"\u003cp\u003eThe SAB Satellite OF080 SL is an 80 cm offset satellite dish intended for permanent outdoor installation. It is constructed from zinc phosphated steel with a polyester powder coat finish and comes in two colour options: Light Grey and Anthracite.\u003c\/p\u003e\u003cp\u003eThe aluminium arm and galvanised back panel are held in place by two claws that clamp firmly to the mast or base, providing a stable platform for the LNB and consistent signal pointing.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOffset parabolic design with 26° offset angle\u003c\/li\u003e\n\u003cli\u003eAluminium arm with galvanised back panel and dual-claw mast clamp\u003c\/li\u003e\n\u003cli\u003eAvailable in Light Grey and Anthracite colour options\u003c\/li\u003e\n\u003cli\u003ePolyester powder coat finish over zinc phosphated steel\u003c\/li\u003e\n\u003cli\u003e40 mm LNB holder accommodating standard universal LNBs\u003c\/li\u003e\n\u003cli\u003eElevation adjustment from 18° to 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e37–38 dB dish gain provides strong Ku-band signal capture for clear satellite reception\u003c\/li\u003e\n\u003cli\u003eGalvanised back with dual claws creates a rigid, vibration-free mast connection\u003c\/li\u003e\n\u003cli\u003eZinc phosphating plus powder coating offers a two-layer defence against corrosion\u003c\/li\u003e\n\u003cli\u003eWide 18°–70° elevation range supports installations across a broad range of latitudes\u003c\/li\u003e\n\u003cli\u003eWithstands operational winds of 90 km\/h and survives gusts up to 150 km\/h\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset Angle:\u003c\/strong\u003e 26°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReception Frequency:\u003c\/strong\u003e 10.700 – 12.750 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Gain:\u003c\/strong\u003e 37–38 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Zinc Phosphated Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Coat:\u003c\/strong\u003e Polyester Powder Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light Grey (also available in Anthracite)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Axis Diameter:\u003c\/strong\u003e 70 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Axis Diameter:\u003c\/strong\u003e 77 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Holder:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Feed:\u003c\/strong\u003e 0.618\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Temperature:\u003c\/strong\u003e -40° to +60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Wind:\u003c\/strong\u003e 90 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurvival Wind:\u003c\/strong\u003e 150 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevation:\u003c\/strong\u003e 18° – 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo colour options suit different building aesthetics without compromising performance\u003c\/li\u003e\n\u003cli\u003eStandard 40 mm LNB holder accepts the most widely used universal LNBs with no adapters\u003c\/li\u003e\n\u003cli\u003eCompact 70 × 77 cm profile fits balconies and restricted installation areas\u003c\/li\u003e\n\u003cli\u003eBroad operating temperature range ensures year-round performance in all climates\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SAB Satellite","offers":[{"title":"Black","offer_id":56518960939390,"sku":"201102","price":30.9,"currency_code":"EUR","in_stock":false},{"title":"Grey","offer_id":56518960972158,"sku":"201102","price":30.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658949869950.webp?v=1779626501"},{"product_id":"sab-satellite-of120-sl","title":"SAB Satellite OF120 SL 120 cm Aluminium Offset Dish – 42.3 dB, Perforated \u0026 Anthracite","description":"\u003cp\u003eThe SAB Satellite OF120 SL is a 120 cm offset parabolic satellite dish designed for demanding Ku-band reception applications where a larger aperture is required. Built from aluminium with a polyester powder coat finish in Anthracite, it combines a large reflective surface with structural durability.\u003c\/p\u003e\u003cp\u003eThe dish features an aluminium arm and galvanised back panel with two claws for a firm, corrosion-resistant attachment to mast or base. Its perforated surface maintains effective signal reception by reducing wind load during strong gusts.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e120 cm offset parabolic reflector with 26° offset angle\u003c\/li\u003e\n\u003cli\u003ePerforated reflector surface for optimum reception in all weather conditions\u003c\/li\u003e\n\u003cli\u003eAluminium construction with polyester powder coat finish in Anthracite\u003c\/li\u003e\n\u003cli\u003eAluminium arm and galvanised back panel with dual-claw mast clamp\u003c\/li\u003e\n\u003cli\u003e40 mm LNB holder for standard universal LNBs\u003c\/li\u003e\n\u003cli\u003eElevation adjustment from 18° to 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e42.3 dB dish gain delivers significantly stronger signal capture than smaller dishes, important for marginal satellite footprints\u003c\/li\u003e\n\u003cli\u003ePerforated design reduces wind resistance, keeping the dish stable up to 90 km\/h operational and surviving 150 km\/h gusts\u003c\/li\u003e\n\u003cli\u003eAluminium construction keeps the dish lightweight relative to its aperture, easing installation\u003c\/li\u003e\n\u003cli\u003eDual-claw galvanised mount provides a rigid connection that withstands prolonged outdoor exposure\u003c\/li\u003e\n\u003cli\u003eWide 18°–70° elevation range supports installations across diverse geographic latitudes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Offset\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset Angle:\u003c\/strong\u003e 26°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReception Frequency:\u003c\/strong\u003e 10.700 – 12.750 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Gain:\u003c\/strong\u003e 42.3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Coat:\u003c\/strong\u003e Polyester Powder Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Anthracite\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Axis Diameter:\u003c\/strong\u003e 105 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Axis Diameter:\u003c\/strong\u003e 117 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Holder:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Feed:\u003c\/strong\u003e 0.618\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Temperature:\u003c\/strong\u003e -40° to +60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Wind:\u003c\/strong\u003e 90 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurvival Wind:\u003c\/strong\u003e 150 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevation:\u003c\/strong\u003e 18° – 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLarger 105 × 117 cm aperture captures weaker satellite signals that smaller dishes cannot reliably receive\u003c\/li\u003e\n\u003cli\u003eAnthracite finish blends discreetly with rooftop and facade installations\u003c\/li\u003e\n\u003cli\u003eStandard 40 mm LNB holder accepts the most widely used universal LNBs without adapters\u003c\/li\u003e\n\u003cli\u003eBroad operating temperature range from -40° to +60° ensures year-round outdoor performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SAB Satellite","offers":[{"title":"Default Title","offer_id":56518961693054,"sku":"201137","price":89.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658950361470.webp?v=1779626510"},{"product_id":"other-p190-al","title":"P190 AL 190 cm Aluminium Parabolic Satellite Dish – One-Piece, 45.9 dB Gain \u0026 Light Grey","description":"\u003cp\u003eThe P190 AL is a 190 cm full-parabolic satellite dish machined from a single piece of aluminium — no joints, no add-on panels. This one-piece construction eliminates alignment errors between sections and maximises structural rigidity under wind load.\u003c\/p\u003e\u003cp\u003eDesigned for demanding reception environments where beam strength is limited, the P190 AL delivers 45.9 dB of dish gain via its large aperture. The polyester powder coat finish in Light Grey protects the aluminium surface against corrosion and UV exposure in outdoor conditions.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne-piece aluminium construction with no additional components or joints\u003c\/li\u003e\n\u003cli\u003eFull parabolic (symmetric) reflector design, 190 cm diameter\u003c\/li\u003e\n\u003cli\u003e45.9 dB dish gain for reception of weak or difficult satellite beams\u003c\/li\u003e\n\u003cli\u003eLight Grey polyester powder coat finish for corrosion and UV resistance\u003c\/li\u003e\n\u003cli\u003e40 mm LNB holder with LNB feed ratio of 0.421\u003c\/li\u003e\n\u003cli\u003eElevation adjustment from 18° to 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle-piece aluminium body removes assembly tolerances, ensuring the reflector surface is geometrically accurate from installation\u003c\/li\u003e\n\u003cli\u003e45.9 dB gain makes it capable of receiving marginal or low-power satellite signals that smaller dishes cannot handle\u003c\/li\u003e\n\u003cli\u003eAluminium construction delivers the large aperture at lower weight compared to steel equivalents of the same size\u003c\/li\u003e\n\u003cli\u003eRated for operational winds of 90 km\/h and survival winds of 150 km\/h, suitable for exposed rooftop locations\u003c\/li\u003e\n\u003cli\u003eWide operating temperature range of -40° to +60° supports year-round outdoor use\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Parabolic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReception Frequency:\u003c\/strong\u003e 10.700 – 12.750 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Gain:\u003c\/strong\u003e 45.9 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish Coat:\u003c\/strong\u003e Polyester Powder Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Axis Diameter:\u003c\/strong\u003e 190 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Axis Diameter:\u003c\/strong\u003e 190 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Holder:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Feed:\u003c\/strong\u003e 0.421\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Temperature:\u003c\/strong\u003e -40° to +60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperation Wind:\u003c\/strong\u003e 90 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurvival Wind:\u003c\/strong\u003e 150 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevation:\u003c\/strong\u003e 18° – 70°\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo-seam one-piece construction means no risk of panel misalignment after installation or over time\u003c\/li\u003e\n\u003cli\u003eThe 190 cm aperture opens access to satellite services outside standard dish coverage zones\u003c\/li\u003e\n\u003cli\u003eLight Grey finish is unobtrusive and resists fading in prolonged sun exposure\u003c\/li\u003e\n\u003cli\u003eLNB feed ratio of 0.421 is optimised for the full parabolic geometry, maximising the efficiency of the large reflector\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Grey","offer_id":56518963003774,"sku":"201116","price":990.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658950623614.webp?v=1779626514"},{"product_id":"iskra-p2845","title":"Iskra P2845 28-Element UHF Outdoor TV Antenna – CH 21-69, 10-12 dB Gain \u0026 75 Ohm","description":"\u003cp\u003eThe Iskra P2845 is a 28-element UHF logarithmic antenna designed for outdoor terrestrial television reception. It covers the full UHF band from channel 21 to 69, making it compatible with DVB-T and DVB-T2 broadcast signals across the 470–862 MHz range.\u003c\/p\u003e\u003cp\u003eWith 28 elements arranged in a logarithmic configuration, the P2845 achieves 10–12 dB gain and a front-to-back ratio of 22–35 dB, effectively rejecting interference from signals arriving behind the antenna.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e28-element logarithmic UHF antenna\u003c\/li\u003e\n\u003cli\u003eFull UHF band coverage: CH 21–69, 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e10–12 dB gain across the operating band\u003c\/li\u003e\n\u003cli\u003eFront-to-back ratio of 22–35 dB for strong directional selectivity\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance for standard coaxial cable connections\u003c\/li\u003e\n\u003cli\u003eNo integrated F connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e28-element count provides substantially higher gain than compact antennas, improving reception in areas with weak terrestrial signal\u003c\/li\u003e\n\u003cli\u003eFront-to-back ratio of 22–35 dB reduces interference from signals arriving from behind, improving picture stability\u003c\/li\u003e\n\u003cli\u003eLogarithmic element arrangement maintains consistent gain across the entire UHF band, not just a portion of it\u003c\/li\u003e\n\u003cli\u003e1,058 mm length positions the P2845 as a long-range antenna capable of reaching distant transmitters\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance is directly compatible with standard television installations without additional matching components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e CH 21–69, 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Elements:\u003c\/strong\u003e 28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 10–12 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Back Ratio:\u003c\/strong\u003e 22–35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1,058 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF Connector:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFull CH 21–69 UHF coverage means no channels are cut off regardless of which frequencies your local transmitter uses\u003c\/li\u003e\n\u003cli\u003e28 elements deliver reception performance suited to rural or fringe reception areas\u003c\/li\u003e\n\u003cli\u003eStandard 75 Ohm output connects directly to existing coaxial cable infrastructure\u003c\/li\u003e\n\u003cli\u003eCompact and established Iskra design with a straightforward outdoor installation profile\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Iskra","offers":[{"title":"Default Title","offer_id":56518963167614,"sku":"202117","price":14.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658950852990.webp?v=1779626519"},{"product_id":"iskra-p2845f","title":"Iskra P2845F 28-Element UHF Outdoor TV Antenna – CH 21-69, 10-12 dB \u0026 F-Type Connector","description":"\u003cp\u003eThe Iskra P2845F is a 28-element logarithmic UHF outdoor antenna covering the full terrestrial television band from channel 21 to channel 69. Its logarithmic element spacing delivers consistent gain across the entire frequency range, making it effective where channel allocations are spread across the band.\u003c\/p\u003e\u003cp\u003eAt 1058 mm in length, it provides a compact footprint for a 28-element design while achieving a front-to-back ratio of up to 35 dB, which reduces interference from signals arriving from behind the antenna.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e28-element logarithmic array covering UHF band CH 21–69\u003c\/li\u003e\n\u003cli\u003eFrequency range: 470 – 862 MHz\u003c\/li\u003e\n\u003cli\u003eF-type connector for direct coaxial cable termination\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance, matched to standard coaxial distribution systems\u003c\/li\u003e\n\u003cli\u003eOverall length: 1058 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLogarithmic element design maintains gain across a wide frequency span, avoiding weak spots on specific channels\u003c\/li\u003e\n\u003cli\u003e10–12 dB gain supports reception at moderate distances from the transmitter\u003c\/li\u003e\n\u003cli\u003eFront-to-back ratio of 22–35 dB limits pickup of reflected or interfering signals from behind the installation\u003c\/li\u003e\n\u003cli\u003eThe built-in F connector eliminates the need for an external adapter at the antenna output, simplifying installation\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance matches directly to standard coaxial cable and distribution equipment without an impedance transformer\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e CH 21–69, 470 – 862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Elements:\u003c\/strong\u003e 28\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 10 – 12 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Back Ratio:\u003c\/strong\u003e 22 – 35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1058 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF Connector:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 3831002958948\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe F connector output connects directly to standard RG-6 coaxial cable — no additional pigtail or adapter required\u003c\/li\u003e\n\u003cli\u003e28 elements in a 1058 mm length strike a practical balance between gain and installation footprint for rooftop or wall-bracket mounting\u003c\/li\u003e\n\u003cli\u003eFull CH 21–69 coverage means the antenna handles the complete UHF allocation in a single unit, even as regional frequency plans vary\u003c\/li\u003e\n\u003cli\u003eThe 75 Ohm impedance is plug-and-play compatible with TV tuners, set-top boxes, and standard coaxial splitters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Iskra","offers":[{"title":"Default Title","offer_id":56518964904318,"sku":"202118","price":18.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658951442814.webp?v=1779626523"},{"product_id":"iskra-p4035-maxi-f","title":"Iskra P4035 MAXI F 40-Element VHF-UHF Outdoor TV Antenna – CH 5-12\/21-69 \u0026 F Connector","description":"\u003cp\u003eThe Iskra P4035 MAXI F is a 40-element combination VHF-UHF logarithmic antenna designed for outdoor installation where both VHF and UHF terrestrial signals must be received from a single antenna. It includes an integrated F connector, eliminating the need for a separate adapter in standard coaxial installations.\u003c\/p\u003e\u003cp\u003eThe antenna covers VHF band III (CH 5–12, 174–230 MHz) and UHF band IV\/V (CH 21–69, 470–862 MHz), making it suitable for DVB-T and DVB-T2 deployments where both bands are in use.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e40-element logarithmic VHF-UHF combination antenna\u003c\/li\u003e\n\u003cli\u003eVHF coverage: CH 5–12, 174–230 MHz\u003c\/li\u003e\n\u003cli\u003eUHF coverage: CH 21–69, 470–862 MHz\u003c\/li\u003e\n\u003cli\u003eGain: 7.5–8.5 dB (VHF) \/ 10–12 dB (UHF)\u003c\/li\u003e\n\u003cli\u003eFront-to-back ratio: 20–35 dB\u003c\/li\u003e\n\u003cli\u003eIntegrated F connector for direct coaxial cable connection\u003c\/li\u003e\n\u003cli\u003eOverall length: 1,610 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle antenna covers both VHF and UHF bands, reducing installation complexity and hardware count\u003c\/li\u003e\n\u003cli\u003e40 elements deliver strong UHF gain of 10–12 dB for reliable reception at distance from the transmitter\u003c\/li\u003e\n\u003cli\u003eIntegrated F connector means the antenna connects directly to standard coaxial cable without an additional termination piece\u003c\/li\u003e\n\u003cli\u003eFront-to-back ratio of 20–35 dB suppresses interference from signals arriving behind the antenna\u003c\/li\u003e\n\u003cli\u003e1,610 mm antenna length supports long-range terrestrial signal capture across both frequency bands\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e CH 5–12 \/ CH 21–69 | 174–230 \/ 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Elements:\u003c\/strong\u003e 40\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 7.5–8.5 dB (VHF) \/ 10–12 dB (UHF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Back Ratio:\u003c\/strong\u003e 20–35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1,610 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF Connector:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne rooftop antenna handles both VHF and UHF reception, simplifying installation and cabling\u003c\/li\u003e\n\u003cli\u003eThe built-in F connector provides a clean, weather-resistant termination point straight out of the box\u003c\/li\u003e\n\u003cli\u003e40 elements give the P4035 MAXI F a performance edge in locations where signal levels are marginal\u003c\/li\u003e\n\u003cli\u003e75 Ohm output is directly compatible with standard television distribution systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Iskra","offers":[{"title":"Default Title","offer_id":56518965887358,"sku":"202127","price":28.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658951737726.webp?v=1779626528"},{"product_id":"iskra-p20f-dtt","title":"Iskra P20F DTT 20-Element UHF Outdoor TV Antenna – CH 21-69, 7.5 dB Gain \u0026 F Connector","description":"\u003cp\u003eThe Iskra P20F DTT is a compact 20-element UHF logarithmic antenna designed for outdoor terrestrial television reception. At 440 mm in length, it is suited to installations where space is limited or signal strength is sufficient without a larger antenna.\u003c\/p\u003e\u003cp\u003eThe antenna covers the full UHF band from channel 21 to 69 (470–862 MHz), with a built-in F connector for direct coaxial cable termination and a 75 Ohm impedance to match standard television distribution systems.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e20-element UHF logarithmic antenna\u003c\/li\u003e\n\u003cli\u003eFull UHF band coverage: CH 21–69, 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e7.5 dB gain\u003c\/li\u003e\n\u003cli\u003eFront-to-back ratio: 20–30 dB\u003c\/li\u003e\n\u003cli\u003eIntegrated F connector for direct coaxial connection\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eCompact length: 440 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompact 440 mm body fits installations where a full-size antenna is not practical, such as balconies or restricted rooftop areas\u003c\/li\u003e\n\u003cli\u003eIntegrated F connector eliminates the need for a separate termination piece, reducing installation time and connection points\u003c\/li\u003e\n\u003cli\u003eFront-to-back ratio of 20–30 dB reduces interference from signals arriving from behind the antenna\u003c\/li\u003e\n\u003cli\u003eFull CH 21–69 coverage ensures compatibility with all current UHF DVB-T and DVB-T2 channel allocations\u003c\/li\u003e\n\u003cli\u003e75 Ohm output directly matches standard television infrastructure without additional matching components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e CH 21–69, 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Elements:\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 7.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Back Ratio:\u003c\/strong\u003e 20–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 440 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF Connector:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 440 mm compact form factor installs easily in tight spaces where larger antennas do not fit\u003c\/li\u003e\n\u003cli\u003eBuilt-in F connector means you can connect your coaxial cable directly without extra hardware\u003c\/li\u003e\n\u003cli\u003eUHF-only design keeps the antenna lightweight and easy to mount and orient\u003c\/li\u003e\n\u003cli\u003eFull UHF band coverage means no channel misses as frequencies shift between transmitters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Iskra","offers":[{"title":"Default Title","offer_id":56518968607102,"sku":"202112","price":16.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658952753534.webp?v=1779626540"},{"product_id":"iskra-p20f-dtt-g","title":"Iskra P20F DTT\/G 20-Element UHF Antenna – Built-in DIGI-LOG 14VU Amp \u0026 22.5 dB Gain","description":"\u003cp\u003eThe Iskra P20F DTT\/G is a compact 20-element UHF aluminium antenna with an integrated DIGI-LOG 14VU amplifier. The amplifier boosts the received signal by 16 dB, raising the effective gain of the antenna-plus-amplifier system to 22.5 dB, making it suitable for locations where passive antennas deliver marginal signal levels.\u003c\/p\u003e\u003cp\u003ePower for the built-in amplifier is supplied through the same coaxial cable as the reception signal — either from an external power supply or directly from a DVB-T receiver that supports antenna power. The amplifier requires power to operate; the antenna does not receive signals in passive mode.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e20-element UHF logarithmic aluminium antenna, 440 mm length\u003c\/li\u003e\n\u003cli\u003eFull UHF coverage: CH 21–69, 470–862 MHz\u003c\/li\u003e\n\u003cli\u003eBuilt-in DIGI-LOG 14VU amplifier with 16 dB amplification\u003c\/li\u003e\n\u003cli\u003eCombined antenna gain: 22.5 dB\u003c\/li\u003e\n\u003cli\u003eAmplifier noise figure: 2 dB\u003c\/li\u003e\n\u003cli\u003ePower supplied through the coaxial cable at 5–24 VDC, 25 mA (optional external supply or via DVB-T receiver)\u003c\/li\u003e\n\u003cli\u003eIntegrated F female connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e22.5 dB total gain substantially improves reception in weak-signal locations where a passive antenna alone is insufficient\u003c\/li\u003e\n\u003cli\u003ePower-over-coax supply eliminates the need to run a separate power cable to the antenna location\u003c\/li\u003e\n\u003cli\u003e2 dB noise figure on the amplifier keeps added noise low, preserving signal quality rather than simply amplifying noise along with the signal\u003c\/li\u003e\n\u003cli\u003eFront-to-back ratio of 20–30 dB reduces interference from signals arriving behind the antenna\u003c\/li\u003e\n\u003cli\u003eAluminium construction keeps the unit lightweight at 440 mm length, simplifying outdoor mounting\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range (Antenna):\u003c\/strong\u003e CH 21–69, 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Elements:\u003c\/strong\u003e 20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAntenna Gain:\u003c\/strong\u003e 22.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Back Ratio:\u003c\/strong\u003e 20–30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 440 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF Connector:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Model:\u003c\/strong\u003e DIGI-LOG 14VU\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Frequency Range:\u003c\/strong\u003e Ch.5–69 (174–862 MHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplification:\u003c\/strong\u003e 16 dB @ 5–24 VDC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 25 mA @ 5–24 VDC (via coaxial cable; external supply or DVB-T receiver — optional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAmplifier Connector:\u003c\/strong\u003e F female\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA single compact unit combines antenna and amplifier, reducing the number of components installed outdoors\u003c\/li\u003e\n\u003cli\u003ePower delivered through the coaxial cable means no separate mains connection at the antenna position\u003c\/li\u003e\n\u003cli\u003eCompatible with external power supplies or DVB-T receivers that deliver power over the antenna cable\u003c\/li\u003e\n\u003cli\u003e22.5 dB combined gain opens up reception in fringe areas that standard passive outdoor antennas cannot serve\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Iskra","offers":[{"title":"Default Title","offer_id":56518969262462,"sku":"202113","price":19.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658953015678.webp?v=1779626546"},{"product_id":"iskra-dtx22f","title":"Iskra DTX22F 22-Element YAGI UHF TV Antenna – CH 21-69, 10-14 dB Gain \u0026 Metal Reflector","description":"\u003cp\u003eThe Iskra DTX22F is a YAGI-type UHF outdoor antenna with 22 elements and a metal reflector. It covers the full UHF band from channel 21 to 69 (470–862 MHz) and delivers 10–14 dB of gain across the band, with a front-to-back ratio exceeding 28 dB for strong directional performance.\u003c\/p\u003e\u003cp\u003eThe metal reflector improves front-to-back isolation compared to designs using a simple dipole element alone. An integrated F connector provides a direct coaxial cable connection without requiring additional adapters.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e22-element YAGI UHF antenna\u003c\/li\u003e\n\u003cli\u003eMetal reflector for enhanced front-to-back isolation\u003c\/li\u003e\n\u003cli\u003eFull UHF band coverage: CH 21–69, 470–862 MHz\u003c\/li\u003e\n\u003cli\u003eGain: 10–14 dB across the band\u003c\/li\u003e\n\u003cli\u003eFront-to-back ratio: \u0026gt;28 dB\u003c\/li\u003e\n\u003cli\u003eIntegrated F connector\u003c\/li\u003e\n\u003cli\u003eOverall length: 810 mm\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eYAGI design with 22 elements achieves 10–14 dB gain, enabling reception of terrestrial signals from distant transmitters\u003c\/li\u003e\n\u003cli\u003eMetal reflector raises front-to-back ratio above 28 dB, providing strong rejection of interference from signals arriving behind the antenna\u003c\/li\u003e\n\u003cli\u003eGreater than 28 dB front-to-back ratio is particularly useful in urban environments where reflected signals can degrade picture quality\u003c\/li\u003e\n\u003cli\u003eIntegrated F connector reduces the number of external connection points, lowering the risk of weather-related connection degradation\u003c\/li\u003e\n\u003cli\u003e810 mm length positions the DTX22F between compact and long-range antenna classes, balancing size with performance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e CH 21–69, 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Elements:\u003c\/strong\u003e 22\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 10–14 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Back Ratio:\u003c\/strong\u003e \u0026gt;28 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 810 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF Connector:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eMetal reflector delivers better interference rejection than reflector-less designs, useful in multi-path signal environments\u003c\/li\u003e\n\u003cli\u003eFull CH 21–69 UHF coverage eliminates the need to select or tune for a specific channel subset\u003c\/li\u003e\n\u003cli\u003eBuilt-in F connector streamlines the installation — connect the coaxial cable and aim the antenna\u003c\/li\u003e\n\u003cli\u003e10–14 dB gain range across the band provides consistent performance even as signal levels vary by channel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Iskra","offers":[{"title":"Default Title","offer_id":56518977159550,"sku":"202130","price":26.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15658954850686.webp?v=1779614526"},{"product_id":"iskra-fm-10vf","title":"Iskra FM-10VF Omnidirectional FM Antenna – 87.5-108 MHz, 360 deg Beam \u0026 F Female Connector","description":"\u003cp\u003eThe Iskra FM-10VF is an aluminium-built FM band antenna from Iskra, designed for omnidirectional reception of FM radio broadcasts in the 87.5–108 MHz range. Its single-element construction and 360° horizontal beam make it a straightforward choice for rooftop or mast installations where reception from all directions is needed.\u003c\/p\u003e\u003cp\u003eThe antenna connects via an \"F\" female socket and mounts on masts with an outside diameter of 20–50 mm, covering the most common mast sizes used in residential antenna installations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle-element FM antenna for 87.5–108 MHz\u003c\/li\u003e\n\u003cli\u003eOmnidirectional: 360° horizontal beam width\u003c\/li\u003e\n\u003cli\u003e0° inclination — vertical mounting orientation\u003c\/li\u003e\n\u003cli\u003e\"F\" female connector for coaxial cable connection\u003c\/li\u003e\n\u003cli\u003eMast mounting for outside diameters of 20–50 mm\u003c\/li\u003e\n\u003cli\u003eAluminium construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e360° horizontal coverage eliminates the need to aim the antenna at a specific transmitter direction\u003c\/li\u003e\n\u003cli\u003eAluminium body is lightweight and suitable for long-term outdoor exposure\u003c\/li\u003e\n\u003cli\u003e\"F\" female connector is a universal standard, compatible with most coaxial cables and distribution equipment\u003c\/li\u003e\n\u003cli\u003e20–50 mm mast compatibility covers typical residential and light-commercial antenna poles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Iskra FM-10VF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e FM Outdoor Antenna\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel \/ Frequency:\u003c\/strong\u003e FM (87.5–108 MHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Elements:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 0.8 dB(i)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF\/B Ratio:\u003c\/strong\u003e —\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBeam Width:\u003c\/strong\u003e Horizontal 360°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector:\u003c\/strong\u003e \"F\" female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInclination:\u003c\/strong\u003e 0°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMast Diameter (outside):\u003c\/strong\u003e 20–50 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOmnidirectional pattern means installation is quick — no compass bearing or fine-aiming required\u003c\/li\u003e\n\u003cli\u003eStandard \"F\" female socket connects to the same cable and splitter infrastructure used for TV antenna systems\u003c\/li\u003e\n\u003cli\u003eSingle-element design keeps the antenna compact and unobtrusive on the mast\u003c\/li\u003e\n\u003cli\u003eFits the most common domestic mast diameters, so no special hardware is needed for typical installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Iskra","offers":[{"title":"Default Title","offer_id":56563334807934,"sku":"202102","price":17.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671305404798.webp?v=1779626585"},{"product_id":"fracarro-omega-8","title":"Fracarro OMEGA 8 Compact UHF Yagi TV Antenna – CH 21-69, 16 dB Gain \u0026 32 dB F\/B","description":"\u003cp\u003eThe Fracarro OMEGA 8 is an outdoor YAGI antenna engineered for UHF terrestrial television reception across channels 21 to 69. Its 8 double-element configuration achieves 16 dB gain, a figure that places it firmly in the medium-high performance category despite the antenna's compact dimensions.\u003c\/p\u003e\u003cp\u003eThe aluminium reflector improves front-to-back isolation, and the integrated F connector provides a direct, weatherproof coaxial termination at the antenna head. At 1070 mm, it is a practical choice for installations where a full-size high-element antenna is impractical.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e8 double-element YAGI array for UHF band CH 21–69\u003c\/li\u003e\n\u003cli\u003eAluminium reflector for enhanced front-to-back isolation\u003c\/li\u003e\n\u003cli\u003e16 dB gain across the 470–862 MHz frequency range\u003c\/li\u003e\n\u003cli\u003eIntegrated F connector output\u003c\/li\u003e\n\u003cli\u003e75 Ohm impedance\u003c\/li\u003e\n\u003cli\u003eTotal antenna length: 1070 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDouble-element design achieves 16 dB gain in a shorter boom than a comparable single-element array, keeping the overall length to 1070 mm\u003c\/li\u003e\n\u003cli\u003e32 dB front-to-back ratio suppresses signals from behind the antenna, reducing multipath interference and co-channel noise\u003c\/li\u003e\n\u003cli\u003eThe aluminium reflector contributes to structural rigidity as well as signal directivity, without adding significant weight\u003c\/li\u003e\n\u003cli\u003eF connector output connects directly to standard coaxial cable — no adapters or baluns required at the mast head\u003c\/li\u003e\n\u003cli\u003eCH 21–69 coverage spans the full UHF terrestrial TV allocation, so the antenna handles any channel in that range without adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e YAGI (Outdoor)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e CH 21–69, 470 – 862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ohm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Elements:\u003c\/strong\u003e 8 Double\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 16 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFront-to-Back Ratio:\u003c\/strong\u003e 32 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReflector Material:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 1070 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eF Connector:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe compact 1070 mm length makes mounting easier on small brackets or in restricted rooftop spaces\u003c\/li\u003e\n\u003cli\u003eAt 16 dB gain, the OMEGA 8 handles most urban and suburban reception scenarios without needing an additional mast-head amplifier\u003c\/li\u003e\n\u003cli\u003eFracarro's double-element construction reduces the total boom count while maintaining directivity, so there are fewer individual parts to align during installation\u003c\/li\u003e\n\u003cli\u003eThe built-in F connector lets you run standard coaxial cable directly from the antenna to the distribution point — no weather-exposed junction box required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fracarro","offers":[{"title":"Default Title","offer_id":56563335561598,"sku":"F213022","price":32.26,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671305896318.webp?v=1779614547"},{"product_id":"johansson-kit-7316-2430-web-amplifier","title":"Johansson KIT 7316\/2430 UHF Mast-Head Amplifier – 25-40 dB Gain, GSM\/LTE Trap \u0026 24 V PSU","description":"\u003cp\u003eThe Johansson KIT 7316\/2430 is a UHF web amplifier built for mast-head installation. It is housed in a protective box that insulates the amplifier circuit and guards against moisture ingress, extending service life in exposed outdoor positions.\u003c\/p\u003e\u003cp\u003eThe kit includes a 24 V power supply with two outputs and the amplifier itself features a potentiometer for field-adjustable gain between 25 and 40 dB. A built-in GSM\/LTE trap reduces interference from mobile frequencies before the signal enters the distribution network.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 UHF input covering 470–862 MHz\u003c\/li\u003e\n\u003cli\u003eAdjustable gain: 25–40 dB, set via on-board potentiometer\u003c\/li\u003e\n\u003cli\u003eBuilt-in GSM\/LTE trap to reject mobile interference\u003c\/li\u003e\n\u003cli\u003eProtective weatherproof box for moisture insulation\u003c\/li\u003e\n\u003cli\u003e2-output 24 V power supply included in the kit\u003c\/li\u003e\n\u003cli\u003eLow noise figure: 2.5 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eField-adjustable gain (25–40 dB) lets the installer match amplification to the actual signal level at the mast head, avoiding over-amplification distortion\u003c\/li\u003e\n\u003cli\u003eThe GSM\/LTE trap removes interference from adjacent mobile bands before amplification, protecting downstream tuners from overload\u003c\/li\u003e\n\u003cli\u003eThe protective enclosure keeps the amplifier circuit dry and insulated at the mast head — no separate weatherproofing enclosure is needed\u003c\/li\u003e\n\u003cli\u003e2.5 dB noise figure minimises the noise added to the received signal, preserving signal quality for distribution\u003c\/li\u003e\n\u003cli\u003eMaximum output level of 105 dBmV supports multi-outlet distribution without the signal degrading below usable levels\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Web\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency:\u003c\/strong\u003e 470 – 862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 25 – 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 2.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e 105 dBmV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGSM\/LTE Trap:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 65 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 24 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e 7316\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 2073160900013\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEverything needed for installation arrives in one kit — amplifier in protective box, 24 V power supply, and manual\u003c\/li\u003e\n\u003cli\u003eThe potentiometer allows gain adjustment without tools beyond a screwdriver, making on-site tuning straightforward\u003c\/li\u003e\n\u003cli\u003eThe 2-output power supply feeds two distribution points from a single unit, reducing wiring complexity\u003c\/li\u003e\n\u003cli\u003e65 mA current consumption keeps running costs low over the amplifier's operational lifetime\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563337068926,"sku":"203103","price":26.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671307043198.webp?v=1779626590"},{"product_id":"johansson-kit-7422-2430-web-amplifier","title":"Johansson KIT 7422\/2430 VHF-UHF Mast-Head Amplifier – 3 Inputs, 40 dB Gain \u0026 24 V PSU","description":"\u003cp\u003eThe Johansson KIT 7422\/2430 is a mast-head web amplifier for VHF and UHF television signals. It accepts 3 VHF-UHF inputs and is enclosed in a protective box that insulates the amplifier electronics and shields against moisture, making it appropriate for outdoor or rooftop antenna installations.\u003c\/p\u003e\u003cp\u003eGain is adjustable via a potentiometer, reaching up to 40 dB on the UHF band. The unit is powered by the included 24 V power supply, which also provides 2 outputs for signal distribution.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3 VHF-UHF inputs\u003c\/li\u003e\n\u003cli\u003eFrequency range: 170–230 MHz (VHF) \/ 470–862 MHz (UHF)\u003c\/li\u003e\n\u003cli\u003eAdjustable gain via potentiometer: 10–30 dB (VHF) \/ 25–40 dB (UHF)\u003c\/li\u003e\n\u003cli\u003eNoise figure: 3.5 dB\u003c\/li\u003e\n\u003cli\u003eMaximum output level: 105 dBmV\u003c\/li\u003e\n\u003cli\u003eNo GSM\/LTE trap\u003c\/li\u003e\n\u003cli\u003eHoused in a protective weatherproof box\u003c\/li\u003e\n\u003cli\u003e24 V power supply with 2 outputs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAdjustable gain allows the amplifier to be tuned to the signal conditions at the installation site rather than applying a fixed gain that may cause overload\u003c\/li\u003e\n\u003cli\u003eWeatherproof protective box keeps moisture away from the amplifier circuits, extending service life in outdoor environments\u003c\/li\u003e\n\u003cli\u003e3 separate inputs allow combining signals from multiple antennas or directional sources before amplification\u003c\/li\u003e\n\u003cli\u003e105 dBmV maximum output level accommodates distribution to several receivers without signal degradation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson KIT 7422\/2430\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e VHF-UHF Web Amplifier\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBand:\u003c\/strong\u003e VHF-UHF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 170–230 MHz \/ 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 10–30 dB (VHF) \/ 25–40 dB (UHF)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e 3.5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e 105 dBmV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGSM\/LTE Trap:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 75 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 24 V\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePotentiometer-controlled gain means you can fine-tune signal levels without swapping fixed-gain modules\u003c\/li\u003e\n\u003cli\u003eThe weatherproof enclosure removes the need for a separate outdoor housing or cabinet\u003c\/li\u003e\n\u003cli\u003e2 power supply outputs simplify installation where the amplifier and power injector are located at different points\u003c\/li\u003e\n\u003cli\u003e3 dB noise figure is low enough to preserve weak signal quality from distant transmitters\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563339985278,"sku":"203112","price":38.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671308288382.webp?v=1779626598"},{"product_id":"fracarro-penta-p85","title":"Fracarro PENTA P85 90 cm Offset Satellite Dish – Ku-Band, 40.1 dB Gain \u0026 120 km\/h Wind","description":"\u003cp\u003eThe Fracarro PENTA P85 is a steel offset satellite dish with a distinctive pentagon shape, designed for reception of Ku-band satellite signals in the 10.700–12.750 GHz range. It delivers a dish gain of 37–40.1 dB and is built to operate in wind speeds up to 120 km\/h and survive gusts up to 150 km\/h, making it appropriate for permanent outdoor installations.\u003c\/p\u003e\u003cp\u003eThe dish features a polyester powder coating finish in white, a 40 mm LNB holder, and an elevation adjustment range of 0°–60°, covering the satellite arc accessible from most of Europe.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePentagon offset dish design, 90 cm nominal size\u003c\/li\u003e\n\u003cli\u003eReception frequency: 10.700–12.750 GHz (Ku-band)\u003c\/li\u003e\n\u003cli\u003eDish gain: 37–40.1 dB\u003c\/li\u003e\n\u003cli\u003eOffset angle: 22.1°\u003c\/li\u003e\n\u003cli\u003eElevation adjustment: 0°–60°\u003c\/li\u003e\n\u003cli\u003eLNB holder: 40 mm\u003c\/li\u003e\n\u003cli\u003eLNB feed: 0.70\u003c\/li\u003e\n\u003cli\u003eSteel construction with polyester powder coating\u003c\/li\u003e\n\u003cli\u003eColour: White\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e37–40.1 dB gain range provides strong signal capture from Ku-band satellites, even in marginal conditions\u003c\/li\u003e\n\u003cli\u003eRated for 120 km\/h operational wind speed and 150 km\/h survival wind speed, suitable for exposed rooftop positions\u003c\/li\u003e\n\u003cli\u003ePolyester powder coating resists weathering and UV degradation over extended outdoor service\u003c\/li\u003e\n\u003cli\u003e0°–60° elevation range covers the main geostationary satellite arc visible from central and southern Europe\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Fracarro PENTA P85\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Offset Satellite Dish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polyester Powder Coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Axis Diameter:\u003c\/strong\u003e 77.5 x 77.5 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Axis Diameter:\u003c\/strong\u003e 98 x 92 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReception Frequency:\u003c\/strong\u003e 10.700–12.750 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Gain:\u003c\/strong\u003e 37–40.1 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOffset Angle:\u003c\/strong\u003e 22.1°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Holder:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Feed:\u003c\/strong\u003e 0.70\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevation:\u003c\/strong\u003e 0°–60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Temperature:\u003c\/strong\u003e -40° to +60°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Wind Speed:\u003c\/strong\u003e 120 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurvival Wind Speed:\u003c\/strong\u003e 150 km\/h\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe pentagon shape distributes the structural load more evenly than a round dish, contributing to rigidity in high-wind environments\u003c\/li\u003e\n\u003cli\u003ePolyester powder coat finish means no annual repainting is required to maintain weather protection\u003c\/li\u003e\n\u003cli\u003e22.1° offset angle keeps the LNB arm out of the main reflector beam, minimising signal shadowing\u003c\/li\u003e\n\u003cli\u003eWide operational temperature range (-40° to +60°) covers all seasons in European climates\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fracarro","offers":[{"title":"Default Title","offer_id":56563340116350,"sku":"F211210","price":107.26,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671308419454.webp?v=1779626606"},{"product_id":"johansson-6630-super-profiler","title":"Johansson 6630 Super Profiler SMATV Headend – 4 UHF Inputs, DVB-T \u0026 \u003e120 dBμV Output","description":"\u003cp\u003eThe Johansson 6630 Super Profiler is a professional multi-channel filter-amplifier and frequency converter for SMATV and MATV headend installations. It receives up to four UHF channels plus VHF\/FM\/DAB inputs, applies highly selective SAW filtering, and outputs two independently programmable UHF RF signals at high output level — making it the core processing engine of any Johansson 65xx headend system.\u003c\/p\u003e\n\u003cp\u003eThe 6630 supports both analogue and DVB-T (COFDM) signal standards and is configurable via the Johansson 6565 Control Unit or the 6554 PC-to-Coax module — no additional tools required for commissioning or adjustments in the field.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e4 × UHF inputs (470–862 MHz) plus VHF BI\/BIII, FM, and DAB inputs (47–240 MHz)\u003c\/li\u003e\n  \u003cli\u003e2 × fully programmable UHF outputs plus a –30 dB test output\u003c\/li\u003e\n  \u003cli\u003e8 UHF filter clusters — adjustable bandwidth of 1 to 7 channels (8–56 MHz)\u003c\/li\u003e\n  \u003cli\u003eSuper-selective single-channel filters: 30 dB attenuation at 1 MHz offset\u003c\/li\u003e\n  \u003cli\u003eMaximum output level exceeding 120 dBμV\u003c\/li\u003e\n  \u003cli\u003eSupports analogue and DVB-T (COFDM) signal processing\u003c\/li\u003e\n  \u003cli\u003eProgrammable via Johansson 6565 Control Unit or 6554 PC-to-Coax module\u003c\/li\u003e\n  \u003cli\u003eUltra-reliable detachable power supply\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003eAll-in-one UHF + VHF + FM + DAB processing in a single compact unit\u003c\/li\u003e\n  \u003cli\u003eHigh output level ensures excellent signal margin for large distribution networks\u003c\/li\u003e\n  \u003cli\u003eFine-grained level adjustment (±10 dB per UHF input) for perfect output equalization\u003c\/li\u003e\n  \u003cli\u003eScalable — combine multiple 6630 units or pair with 65xx active combiners\u003c\/li\u003e\n  \u003cli\u003eField-configurable without a PC using the optional 6565 control unit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n  \u003cli\u003e\n\u003cstrong\u003eUHF Inputs:\u003c\/strong\u003e 4 × F-type, 470–862 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eVHF\/FM\/DAB Inputs:\u003c\/strong\u003e BI (47–68 MHz), FM (88–108 MHz), BIII\/DAB (174–240 MHz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2 × programmable F-type UHF + 1 × test output (–30 dB)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eFilter Clusters:\u003c\/strong\u003e 8 UHF clusters, 1–7 channel bandwidth (8–56 MHz)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSingle-Channel Filter Selectivity:\u003c\/strong\u003e 30 dB @ ±1 MHz\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eMax Output Level:\u003c\/strong\u003e \u0026gt;120 dBμV\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eLevel Adjustment:\u003c\/strong\u003e ±10 dB per UHF input\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eSignal Standards:\u003c\/strong\u003e Analogue, DVB-T (COFDM)\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003eProgramming:\u003c\/strong\u003e Via Johansson 6565 control unit or 6554 PC-to-coax module\u003c\/li\u003e\n  \u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Detachable (mains)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eSwedish engineering for demanding professional TV distribution installations — high output, superb selectivity, and multi-standard support make the 6630 Super Profiler the go-to headend processor for large SMATV\/MATV networks.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563340837246,"sku":"203406","price":659.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671308681598.webp?v=1779626615"},{"product_id":"johansson-4503-3-way-splitter","title":"Johansson 4503 Wideband 3-Way Coaxial Splitter – 5-2340 MHz, F-Type \u0026 DC Pass on All Ports","description":"\u003cp\u003eThe Johansson 4503 is a 3-way wideband splitter designed for indoor use in satellite and terrestrial TV distribution systems. Its wide frequency range of 5–2340 MHz makes it compatible with wideband LNB systems, and DC pass is provided on all three ports with diode protection, allowing LNB power to pass through from the receiver without the need for a separate power inserter on each branch.\u003c\/p\u003e\u003cp\u003eThe housing is manufactured from nickel-plated zinc diecast, providing both RF shielding and mechanical durability. All connections are made via standard \"F\"-type connectors. This product is supplied as a pack of 50 units.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3-way wideband splitter\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2340 MHz\u003c\/li\u003e\n\u003cli\u003eDC power pass on all ports (with diode protection)\u003c\/li\u003e\n\u003cli\u003eNickel-plated zinc diecast housing\u003c\/li\u003e\n\u003cli\u003e\"F\"-type connectors on all ports\u003c\/li\u003e\n\u003cli\u003eLow insertion loss\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWideband coverage from 5 to 2340 MHz ensures compatibility with both standard and wideband LNB systems without needing a separate wideband-rated splitter\u003c\/li\u003e\n\u003cli\u003eDC pass on all three ports with diode protection allows LNB power to reach the satellite dish from any connected receiver\u003c\/li\u003e\n\u003cli\u003eNickel-plated zinc diecast housing provides RF isolation between ports and resists mechanical damage in cable distribution enclosures\u003c\/li\u003e\n\u003cli\u003e\"F\"-type connectors are the standard for satellite installations, ensuring compatibility with existing cabling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4503\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wideband Indoor 3-Way Splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2340 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 11 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Pass (out\/in):\u003c\/strong\u003e 3 ports\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Nickel-plated zinc diecast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e \"F\"-type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Quantity:\u003c\/strong\u003e 50 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle splitter covers both legacy satellite frequencies and wideband LNB output, avoiding the need for two different models in a mixed installation\u003c\/li\u003e\n\u003cli\u003eDiode-protected DC pass prevents port-to-port power shorts that can occur when multiple receivers are connected simultaneously\u003c\/li\u003e\n\u003cli\u003eCompact diecast form factor fits neatly inside standard satellite distribution enclosures\u003c\/li\u003e\n\u003cli\u003ePack of 50 units is practical for installers and resellers fitting multiple sites at once\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563342147966,"sku":"204102","price":3.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671309173118.webp?v=1779626628"},{"product_id":"lyngbox-html","title":"Lyngbox Linux HD Satellite Receiver – DVB-S2\/DVB-T, 160 GB PVR \u0026 Dual CI Slots","description":"\u003cp\u003eThe Lyngbox is a Linux-powered set-top box that combines DVB-S\/DVB-S2 satellite reception with DVB-T terrestrial reception in a single chassis. Its internal 160 GB hard disk enables PVR recording without any external storage device, while two Common Interface slots give access to encrypted pay-TV services.\u003c\/p\u003e\u003cp\u003eThe front panel features an OLED display for at-a-glance channel information. Connectivity is broad: HDMI, four USB 2.0 ports, e-SATA, S\/PDIF, RCA composite, and an RS-232 serial port cover virtually every connection scenario for home AV setups.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDual-standard reception: DVB-S\/DVB-S2 satellite and DVB-T terrestrial in one unit\u003c\/li\u003e\n\u003cli\u003eInternal 160 GB hard disk with PVR recording functionality\u003c\/li\u003e\n\u003cli\u003eTwo Common Interface (CI) slots for pay-TV conditional access modules\u003c\/li\u003e\n\u003cli\u003eSTi7100 triple-core processor: 1x266 MHz + 2x400 MHz\u003c\/li\u003e\n\u003cli\u003eOLED front panel display\u003c\/li\u003e\n\u003cli\u003eUp to 50,000 channel memory\u003c\/li\u003e\n\u003cli\u003eInternal expansion slot for an additional tuner card\u003c\/li\u003e\n\u003cli\u003eDiSEqC 1.2 support for motorised dish control\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe built-in hard disk means you can record and pause live TV without connecting an external drive\u003c\/li\u003e\n\u003cli\u003eDual CI slots allow simultaneous use of two conditional access systems, useful for households subscribing to more than one pay-TV service\u003c\/li\u003e\n\u003cli\u003eDVB-S2 and DVB-T reception in one box eliminates the need for a separate terrestrial decoder\u003c\/li\u003e\n\u003cli\u003eDiSEqC 1.2 enables automated satellite dish positioning for multi-satellite setups\u003c\/li\u003e\n\u003cli\u003eThe four USB 2.0 ports allow recording to external drives or playback of media from a USB storage device\u003c\/li\u003e\n\u003cli\u003eChannel search by typing a name (or the first letters) on the optional wireless keyboard speeds up navigation across a large channel list\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eReception Standards:\u003c\/strong\u003e DVB-T, DVB-S, DVB-S2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Standards:\u003c\/strong\u003e MPEG-2, H.264\/MPEG-4 AVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHD Output:\u003c\/strong\u003e 720p, 1080i\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCommon Interface:\u003c\/strong\u003e 2x CI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProcessor:\u003c\/strong\u003e STi7100, 1x266 MHz + 2x400 MHz (triple core)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlash Memory:\u003c\/strong\u003e 32 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Memory:\u003c\/strong\u003e 96 MB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInternal Storage:\u003c\/strong\u003e HDD 160 GB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e OLED\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChannel Memory:\u003c\/strong\u003e 50,000\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI:\u003c\/strong\u003e 1x HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB:\u003c\/strong\u003e 4x USB 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOther Ports:\u003c\/strong\u003e 1x Ethernet, 1x e-SATA, 1x RCA, 1x S\/PDIF, 1x RS-232\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePVR:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiSEqC:\u003c\/strong\u003e 1.2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMenu Languages:\u003c\/strong\u003e Greek, English, Dutch, German, Russian, Italian, French and others\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLinux firmware gives access to a wide ecosystem of third-party plugins and channel-list managers\u003c\/li\u003e\n\u003cli\u003eThe optional wireless remote keyboard lets you search for channels by typing the name directly, without scrolling through thousands of entries\u003c\/li\u003e\n\u003cli\u003eRecordings can also be directed to an external DVD recorder connected via USB 2.0, giving a second archiving option beyond the internal hard disk\u003c\/li\u003e\n\u003cli\u003eThe unit ships with a standard remote control; the wireless keyboard is an optional accessory, so the out-of-box setup is complete\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lyngbox","offers":[{"title":"Default Title","offer_id":56563345064318,"sku":"211113","price":250.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671309730174.webp?v=1779626649"},{"product_id":"johansson-4510-tap-1-output","title":"Johansson 4510 Coaxial TAP 1 Output – 5-2300 MHz, 10 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4510 is a TAP-type coaxial splitter designed for signal distribution networks. With 1 input and 1 tap output, it extracts a portion of the signal at 10 dB insertion loss while allowing the main line to continue with minimal degradation.\u003c\/p\u003e\u003cp\u003eDC pass capability means it can power an active element — such as a masthead amplifier or LNB — directly through the coaxial cable, without a separate power feed.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 1 output\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 10 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 20 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLow 10 dB tap loss preserves the bulk of signal strength for downstream runs\u003c\/li\u003e\n\u003cli\u003eWide 5–2300 MHz bandwidth handles all standard broadcast and satellite frequencies in a single component\u003c\/li\u003e\n\u003cli\u003eDC pass eliminates the need for a separate power injector when powering active antenna components\u003c\/li\u003e\n\u003cli\u003e20 dB port isolation limits signal leakage between tapped and through paths\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4510\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompact TAP format fits standard head-end and distribution enclosures\u003c\/li\u003e\n\u003cli\u003eThe 10 dB tap value is ideal for the first tap position on a long cascade, where the through signal must remain strong\u003c\/li\u003e\n\u003cli\u003eSingle-output design simplifies wiring in straightforward single-drop installations\u003c\/li\u003e\n\u003cli\u003eJohansson's consistent build quality ensures stable performance over the product lifetime\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563349094782,"sku":"204111","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671310287230.webp?v=1779626665"},{"product_id":"johansson-4511-tap-1-output","title":"Johansson 4511 Coaxial TAP 1 Output – 5-2300 MHz, 15 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4511 is a TAP-type coaxial distribution component with 1 input and 1 tap output. Offering 15 dB insertion loss and 20 dB port isolation, it extracts a measured portion of the signal for a single subscriber drop while the main trunk continues with adequate strength.\u003c\/p\u003e\u003cp\u003eDC pass functionality allows the unit to pass supply voltage through the coaxial path, enabling direct powering of active antenna system components such as masthead amplifiers or LNBs.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 1 output\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 15 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 20 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e15 dB tap level suits intermediate positions in a distribution cascade, balancing extraction with through-signal preservation\u003c\/li\u003e\n\u003cli\u003eWide 5–2300 MHz bandwidth handles all standard broadcast and satellite frequencies in a single component\u003c\/li\u003e\n\u003cli\u003eDC pass removes the need for a separate power injector when driving active components in the antenna line\u003c\/li\u003e\n\u003cli\u003e20 dB isolation keeps the tapped subscriber signal separate from the trunk path\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4511\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 15 dB tap value fits naturally at a second or third position in a long distribution cascade\u003c\/li\u003e\n\u003cli\u003eSingle-output design keeps wiring straightforward for a single-subscriber drop from the trunk\u003c\/li\u003e\n\u003cli\u003eCompatible across the full 5–2300 MHz band, eliminating the need for separate UHF or satellite-band components\u003c\/li\u003e\n\u003cli\u003eJohansson's consistent build quality ensures stable long-term performance in fixed installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563350438270,"sku":"204112","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671310516606.webp?v=1779626669"},{"product_id":"johansson-4512-tap-1-output","title":"Johansson 4512 Coaxial TAP 1 Output – 5-2300 MHz, 20 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4512 is a TAP-type coaxial distribution component with 1 input and 1 tap output. At 20 dB insertion loss and 25 dB port isolation, it is designed for use further along a distribution cascade, where the main signal level is still adequate to support a deeper tap.\u003c\/p\u003e\u003cp\u003eDC pass capability allows supply voltage to travel through the coaxial cable, enabling active antenna components — such as masthead amplifiers or LNBs — to receive power without a separate feed line.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 1 output\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 20 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 25 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e20 dB tap level matches late-stage cascade positions where signal levels have been reduced by prior splitters\u003c\/li\u003e\n\u003cli\u003e25 dB isolation provides stronger separation between the tapped drop and the through path compared to lower-loss models\u003c\/li\u003e\n\u003cli\u003eWide 5–2300 MHz bandwidth handles terrestrial, satellite, and broadband frequencies without additional components\u003c\/li\u003e\n\u003cli\u003eDC pass supports in-line powering of active antenna system elements\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4512\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 20 dB tap value fills the gap in a graduated cascade between the 15 dB and 25 dB models in the Johansson 451x series\u003c\/li\u003e\n\u003cli\u003eHigher 25 dB isolation compared to earlier models reduces crosstalk at the tap port\u003c\/li\u003e\n\u003cli\u003eSingle-output design means no wasted ports in a single-subscriber application\u003c\/li\u003e\n\u003cli\u003eConsistent with the rest of the Johansson 451x series, simplifying mixed-tap installations in the same enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563351978366,"sku":"204106","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671310844286.webp?v=1779626674"},{"product_id":"johansson-4513-tap-1-output","title":"Johansson 4513 Coaxial TAP 1 Output – 5-2300 MHz, 25 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4513 is a TAP-type coaxial distribution component with 1 input and 1 tap output. At 25 dB insertion loss and 30 dB port isolation, it provides the deepest tap value in the Johansson single-output TAP series, making it appropriate for the final subscriber connection on a long distribution run.\u003c\/p\u003e\u003cp\u003eDC pass capability lets voltage pass through the coaxial cable to power active antenna elements — such as masthead amplifiers or LNBs — without a separate supply cable.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 1 output\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 25 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 30 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e25 dB tap level is suited for final-position drops at the end of a cascade where earlier taps have already extracted most of the signal budget\u003c\/li\u003e\n\u003cli\u003e30 dB isolation — the highest in the 451x single-output series — provides strong port-to-port separation\u003c\/li\u003e\n\u003cli\u003eWide 5–2300 MHz bandwidth handles all standard broadcast and satellite frequencies without additional filtering\u003c\/li\u003e\n\u003cli\u003eDC pass supports in-line powering of active antenna components\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4513\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompletes the Johansson 451x TAP family, providing a 25 dB option for precise cascade budget planning alongside the 10, 15, and 20 dB models\u003c\/li\u003e\n\u003cli\u003eThe 30 dB isolation minimises signal leakage back onto the trunk, protecting signal integrity across the whole distribution system\u003c\/li\u003e\n\u003cli\u003eSingle-output format keeps the installation clean for a single final-position subscriber drop\u003c\/li\u003e\n\u003cli\u003eFull 5–2300 MHz coverage means one component handles both terrestrial and satellite signals\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563352928638,"sku":"204108","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671311040894.webp?v=1779626679"},{"product_id":"johansson-4520-tap-2-outputs","title":"Johansson 4520 Coaxial TAP 2 Outputs – 5-2300 MHz, 10 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4520 is a TAP-type coaxial distribution component with 1 input and 2 tap outputs. At 10 dB insertion loss and 25 dB port isolation, it extracts signal for two subscriber drops while allowing the main trunk to continue with high residual signal strength.\u003c\/p\u003e\u003cp\u003eDC pass functionality enables supply voltage to travel through the coaxial cable, allowing active components such as masthead amplifiers or LNBs to be powered directly from the line without a separate feed.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 2 outputs\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 10 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 25 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLow 10 dB tap loss preserves strong signal levels on the trunk for subsequent distribution stages\u003c\/li\u003e\n\u003cli\u003eTwo simultaneous outputs serve two subscriber drops from a single tap point, reducing the number of components in the installation\u003c\/li\u003e\n\u003cli\u003e25 dB isolation between ports limits signal leakage between the two tapped outputs and the through path\u003c\/li\u003e\n\u003cli\u003eWide 5–2300 MHz bandwidth accommodates terrestrial, satellite, and broadband signals in a single passive component\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4520\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe two-output, 10 dB combination is ideal at the first or second tap position on a long trunk where signal budget must be conserved\u003c\/li\u003e\n\u003cli\u003eServes two drops simultaneously without requiring an additional passive splitter downstream\u003c\/li\u003e\n\u003cli\u003eDC pass keeps the active antenna power path intact through the tap without extra hardware\u003c\/li\u003e\n\u003cli\u003eJohansson 452x format aligns with the 451x single-output series, allowing mixed configurations in the same enclosure\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563354370430,"sku":"204114","price":5.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671311171966.webp?v=1779626683"},{"product_id":"johansson-4521-tap-2-outputs","title":"Johansson 4521 Coaxial TAP 2 Outputs – 5-2300 MHz, 15 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4521 is a TAP-type coaxial distribution component with 1 input and 2 tap outputs. Offering 15 dB insertion loss and 30 dB port isolation, it serves two subscriber connections at a single tap point while maintaining adequate through-signal for further cascade stages.\u003c\/p\u003e\u003cp\u003eDC pass capability allows voltage to travel through the coaxial cable, enabling direct powering of active components such as masthead amplifiers or LNBs on the same line without a separate supply cable.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 2 outputs\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 15 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 30 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e15 dB tap level is suited for intermediate positions in a distribution cascade, providing signal for two drops without excessive trunk signal loss\u003c\/li\u003e\n\u003cli\u003e30 dB isolation — higher than the 4520 model — provides strong port separation, reducing cross-talk between the two tap outputs and the through path\u003c\/li\u003e\n\u003cli\u003eTwo simultaneous outputs serve dual subscriber drops from a single fitting, simplifying the distribution architecture\u003c\/li\u003e\n\u003cli\u003eWide 5–2300 MHz bandwidth covers terrestrial, satellite, and broadband signals in a single passive unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4521\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSteps up from the 4520 with 30 dB isolation for better port separation at a 15 dB tap loss\u003c\/li\u003e\n\u003cli\u003eTwo outputs remove the need for a separate two-way splitter downstream of the tap\u003c\/li\u003e\n\u003cli\u003eDC pass keeps active antenna system components powered through the same coaxial run\u003c\/li\u003e\n\u003cli\u003eConsistent with the Johansson 452x series footprint, enabling same-enclosure mixing with other tap values\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563355615614,"sku":"204115","price":5.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671311368574.webp?v=1779626687"},{"product_id":"johansson-4522-tap-2-outputs","title":"Johansson 4522 Coaxial TAP 2 Outputs – 5-2300 MHz, 20 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4522 is a TAP-type coaxial distribution component with 1 input and 2 tap outputs. At 20 dB insertion loss and 30 dB port isolation, it is designed for use at later stages of a distribution cascade, providing two subscriber drops where residual signal levels can support a higher tap extraction value.\u003c\/p\u003e\u003cp\u003eDC pass capability lets supply voltage travel through the coaxial cable, enabling direct powering of active antenna components such as masthead amplifiers or LNBs without a separate supply run.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 2 outputs\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 20 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 30 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e20 dB tap value fits positions further down a distribution cascade where earlier taps have reduced the trunk signal level\u003c\/li\u003e\n\u003cli\u003e30 dB isolation provides effective separation between the two tap outputs and the through path\u003c\/li\u003e\n\u003cli\u003eTwo simultaneous outputs serve dual subscriber drops from a single component, avoiding a separate downstream splitter\u003c\/li\u003e\n\u003cli\u003eWide 5–2300 MHz bandwidth handles all standard broadcast, satellite, and broadband frequencies in one passive unit\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4522\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSits between the 4521 (15 dB) and 4523 (25 dB) in the Johansson 452x series, completing the range for precise cascade budget design\u003c\/li\u003e\n\u003cli\u003eThe 30 dB isolation matches the higher-loss models in the series, maintaining consistent port separation across the product line\u003c\/li\u003e\n\u003cli\u003eTwo outputs mean a single component handles a dual-subscriber tap point in deeper cascade positions\u003c\/li\u003e\n\u003cli\u003eDC pass maintains the active antenna power path through the unit without any extra hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563356664190,"sku":"204116","price":5.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671311597950.webp?v=1779626691"},{"product_id":"johansson-4523-tap-2-εξόδων","title":"Johansson 4523 Coaxial TAP 2 Outputs – 5-2300 MHz, 25 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4523 is a TAP-type coaxial distribution component with 1 input and 2 tap outputs. With 25 dB insertion loss and 30 dB port isolation, it provides the deepest tap value in the Johansson two-output TAP series, making it appropriate for the final dual subscriber connection on a long distribution run.\u003c\/p\u003e\u003cp\u003eDC pass capability lets voltage pass through the coaxial cable to power active components — such as masthead amplifiers or LNBs — without a separate power feed on the same line.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 2 outputs\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 25 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 30 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e25 dB tap value suits the final dual-drop positions at the end of a cascade where earlier taps have consumed the majority of the signal budget\u003c\/li\u003e\n\u003cli\u003e30 dB isolation provides strong port-to-port separation across both tap outputs and the through path\u003c\/li\u003e\n\u003cli\u003eTwo outputs serve a dual subscriber point in a single component, eliminating the need for a separate downstream splitter\u003c\/li\u003e\n\u003cli\u003eWide 5–2300 MHz bandwidth covers terrestrial, satellite, and broadband frequencies without additional filtering\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4523\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompletes the Johansson 452x dual-output TAP series alongside the 10, 15, and 20 dB models, enabling precise signal budget planning across the cascade\u003c\/li\u003e\n\u003cli\u003e30 dB isolation matches the other high-loss models in the 452x range, ensuring consistent port separation across the entire distribution system\u003c\/li\u003e\n\u003cli\u003eSingle component replaces a tap plus a two-way splitter for the final dual-subscriber position\u003c\/li\u003e\n\u003cli\u003eFull 5–2300 MHz coverage means one component handles both terrestrial and satellite signals at the end of the line\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563359285630,"sku":"204117","price":5.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671311794558.webp?v=1779626696"},{"product_id":"johansson-4524","title":"Johansson 4524 Coaxial TAP 2 Outputs – 5-2300 MHz, 30 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4524 is a TAP-type coaxial distribution component with 1 input and 2 tap outputs. At 30 dB insertion loss and 30 dB port isolation, it delivers the deepest tap value in the Johansson two-output TAP family, making it the right choice for the lowest-signal positions at the very end of a long distribution cascade.\u003c\/p\u003e\u003cp\u003eDC pass capability allows supply voltage to travel through the coaxial cable, enabling direct powering of active antenna elements such as masthead amplifiers or LNBs on the same line. The 4524 is supplied in bulk packaging of 50 units, suited for installation projects and resellers.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 2 outputs\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 30 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 30 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003cli\u003eSold in bulk packaging of 50 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e30 dB insertion loss, the maximum in the Johansson 452x series, handles the deepest cascade positions where residual signal levels are at their lowest\u003c\/li\u003e\n\u003cli\u003eEqual 30 dB isolation and insertion loss values provide balanced, predictable performance at extreme cascade depths\u003c\/li\u003e\n\u003cli\u003eTwo outputs serve a dual-subscriber end position from a single component, eliminating the need for a separate downstream splitter\u003c\/li\u003e\n\u003cli\u003eBulk 50-unit packaging lowers per-unit cost for large installations and distribution projects\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4524\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 50 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompletes the Johansson 452x dual-output TAP series with a 30 dB option, providing the full range from 10 to 30 dB for complete cascade budget design\u003c\/li\u003e\n\u003cli\u003eBulk packaging of 50 units makes it practical for contractors and installers working on multi-dwelling or CATV distribution projects\u003c\/li\u003e\n\u003cli\u003eDC pass is retained even at the deepest tap value, keeping active antenna components powered throughout the cascade\u003c\/li\u003e\n\u003cli\u003eConsistent 5–2300 MHz bandwidth across the entire Johansson TAP range simplifies system planning and component stocking\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563360399742,"sku":"204118","price":5.7,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671311958398.webp?v=1779626700"},{"product_id":"johansson-4540","title":"Johansson 4540 Coaxial TAP 4 Outputs – 5-2300 MHz, 12 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4540 is a TAP-type coaxial distribution component with 1 input and 4 tap outputs. At 12 dB insertion loss and 18 dB port isolation, it taps four subscriber drops from the distribution trunk simultaneously while preserving adequate residual signal for further cascade stages.\u003c\/p\u003e\u003cp\u003eDC pass functionality allows supply voltage to travel through the coaxial cable, enabling active components such as masthead amplifiers or LNBs to be powered from the same line. The 4540 is supplied in bulk packaging of 50 units, suited for multi-dwelling and CATV installation projects.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 4 outputs\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz, covering terrestrial, satellite, and DOCSIS bands\u003c\/li\u003e\n\u003cli\u003eDC pass on the input port\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 12 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between output ports: 18 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss on input and output: 10 dB\u003c\/li\u003e\n\u003cli\u003eSold in bulk packaging of 50 units\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFour simultaneous outputs serve four subscriber drops from a single tap point, significantly reducing the number of components in large distribution installations\u003c\/li\u003e\n\u003cli\u003e12 dB insertion loss keeps the trunk signal strong for further downstream stages, even while feeding four simultaneous drops\u003c\/li\u003e\n\u003cli\u003eWide 5–2300 MHz bandwidth covers terrestrial, satellite, and broadband signals in a single passive unit\u003c\/li\u003e\n\u003cli\u003eBulk 50-unit packaging reduces per-unit cost for contractors and installation professionals\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4540\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 12 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 18 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 50 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFour outputs in a single TAP component replace a separate tap-plus-splitter combination, keeping the distribution enclosure tidy and the component count low\u003c\/li\u003e\n\u003cli\u003eThe 12 dB tap level is well-suited to the first or second position on a trunk where the signal budget must remain strong for additional drops further down the line\u003c\/li\u003e\n\u003cli\u003eBulk packaging of 50 units makes the 4540 the practical choice for contractors stocking a standard tap inventory for multi-dwelling projects\u003c\/li\u003e\n\u003cli\u003eDC pass maintained at all four output positions keeps active antenna system elements powered without any extra hardware\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563361481086,"sku":"204119","price":8.06,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671312089470.webp?v=1779626706"},{"product_id":"johansson-4541","title":"Johansson 4541 Coaxial TAP 4 Outputs – 5-2300 MHz, 15 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4541 is a TAP-type signal distributor with one input and four outputs, operating across the 5–2300 MHz frequency range. It supports DC pass, making it suitable for powering active antenna elements through the coaxial line.\u003c\/p\u003e\u003cp\u003eThis unit is intended for structured antenna distribution systems where a main signal feed needs to be split to multiple receivers with controlled signal levels and port isolation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 4 outputs\u003c\/li\u003e\n\u003cli\u003eBroad frequency range: 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003eDC pass on input\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 15 dB\u003c\/li\u003e\n\u003cli\u003ePort isolation: 20 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss (input\/output): 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWide frequency coverage supports terrestrial, satellite, and cable signals on a single device\u003c\/li\u003e\n\u003cli\u003eDC pass allows active components upstream to be powered without additional cabling\u003c\/li\u003e\n\u003cli\u003e20 dB isolation between outputs prevents cross-interference between connected receivers\u003c\/li\u003e\n\u003cli\u003eConsistent return loss reduces signal reflections within the distribution network\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4541\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP distributor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 50 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold in packs of 50, making it cost-effective for installers and system integrators\u003c\/li\u003e\n\u003cli\u003eTAP topology preserves the main line signal level while feeding tap outputs\u003c\/li\u003e\n\u003cli\u003eCompact design fits standard distribution housings and enclosures\u003c\/li\u003e\n\u003cli\u003eFrom Johansson, a specialist in professional antenna distribution equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563362464126,"sku":"204120","price":8.06,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671312286078.webp?v=1779626710"},{"product_id":"johansson-4543","title":"Johansson 4543 Coaxial TAP 4 Outputs – 5-2300 MHz, 25 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4543 is a TAP-type signal distributor with one input and four outputs, operating across the 5–2300 MHz frequency range. It supports DC pass and delivers 25 dB insertion loss, making it appropriate for tap points further along a distribution cascade where a higher tap loss is needed to maintain trunk signal levels.\u003c\/p\u003e\u003cp\u003eDesigned for professional antenna distribution networks, this unit allows a main coaxial trunk to feed multiple subscriber outlets while keeping the trunk signal intact for downstream devices.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 4 outputs\u003c\/li\u003e\n\u003cli\u003eBroad frequency range: 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003eDC pass on input\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 25 dB\u003c\/li\u003e\n\u003cli\u003ePort isolation: 25 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss (input\/output): 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e25 dB tap loss suits mid-to-far positions in a cascaded distribution system where trunk signal is stronger\u003c\/li\u003e\n\u003cli\u003e25 dB port isolation effectively prevents signal leakage between subscriber outputs\u003c\/li\u003e\n\u003cli\u003eWide frequency range accommodates terrestrial, satellite, and cable signals simultaneously\u003c\/li\u003e\n\u003cli\u003eDC pass enables powering of active antenna components without extra cabling runs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4543\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP distributor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 50 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePack of 50 units keeps per-unit cost low for large installations and system integrators\u003c\/li\u003e\n\u003cli\u003eHigher tap loss differentiates this model from the 4541, allowing precise level planning across a cascade\u003c\/li\u003e\n\u003cli\u003eCompact form factor integrates into standard distribution enclosures without modification\u003c\/li\u003e\n\u003cli\u003eJohansson's professional-grade build quality ensures consistent electrical performance\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563363938686,"sku":"204122","price":8.06,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671312744830.webp?v=1779626718"},{"product_id":"johansson-4544","title":"Johansson 4544 Coaxial TAP 4 Outputs – 5-2300 MHz, 30 dB Insertion Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4544 is a TAP-type signal distributor with one input and four outputs, operating across the 5–2300 MHz frequency range. It includes DC pass support and features a 30 dB insertion loss — the highest tap value in the Johansson 454x series — making it the correct choice for tap points located close to the signal source, where trunk signal levels are highest.\u003c\/p\u003e\u003cp\u003eThis unit is designed for professional antenna distribution infrastructures such as apartment blocks, hotels, and commercial buildings, where a cascaded tap system is used to serve multiple subscriber outlets from a single trunk line.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTAP configuration: 1 input, 4 outputs\u003c\/li\u003e\n\u003cli\u003eBroad frequency range: 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003eDC pass on input\u003c\/li\u003e\n\u003cli\u003eInsertion loss: 30 dB\u003c\/li\u003e\n\u003cli\u003ePort isolation: 25 dB\u003c\/li\u003e\n\u003cli\u003eReturn loss (input\/output): 10 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e30 dB tap loss is suited for near-source tap positions where the trunk signal is at its strongest\u003c\/li\u003e\n\u003cli\u003e25 dB port isolation limits inter-outlet signal interference within the subscriber network\u003c\/li\u003e\n\u003cli\u003eFull 5–2300 MHz coverage spans terrestrial, satellite IF, and DOCSIS upstream bands\u003c\/li\u003e\n\u003cli\u003eDC pass supports powering of active upstream components without dedicated power cabling\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 4544\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e TAP distributor\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss (in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 50 pcs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold in packs of 50, reducing per-unit cost for large-scale installations\u003c\/li\u003e\n\u003cli\u003eThe 30 dB value completes the Johansson TAP range alongside the 4541 (15 dB) and 4543 (25 dB), enabling full cascade planning\u003c\/li\u003e\n\u003cli\u003eCompact form factor fits standard tap housings and flush-mounted enclosures\u003c\/li\u003e\n\u003cli\u003eConsistent Johansson manufacturing standards ensure repeatable electrical performance across units\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563365249406,"sku":"204123","price":8.06,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671313138046.webp?v=1779626724"},{"product_id":"johansson-4561","title":"Johansson 4561 6-Way Passive TV\/SAT Tap – 5-2400 MHz, F-Type \u0026 DC Pass on Port 1","description":"\u003cp\u003eThe Johansson 4561 is a professional 6-way passive tap designed for distributing TV and satellite signals across multiple outlets with precise, controlled attenuation. It covers the full broadband frequency range from 5 to 2400 MHz, making it suitable for terrestrial, cable, and satellite signal distribution.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor installation in residential and commercial antenna distribution systems, it features a compact nickel-plated zinc diecast housing and F-type connectors throughout for reliable, interference-free connections.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e6-way passive tap covering 5–2400 MHz (DVB-T\/T2, DVB-C, SAT IF)\u003c\/li\u003e\n\u003cli\u003eTap loss below 16 dB (5–1550 MHz) and below 20 dB (up to 2400 MHz)\u003c\/li\u003e\n\u003cli\u003eLow insertion loss: \u0026lt;5 dB (5–2150 MHz), \u0026lt;6 dB (2151–2400 MHz)\u003c\/li\u003e\n\u003cli\u003ePort isolation \u0026gt;25 dB across all frequency bands\u003c\/li\u003e\n\u003cli\u003eDC power pass on 1 port for powering active antennas or amplifiers\u003c\/li\u003e\n\u003cli\u003eAll F-type connectors for easy integration into existing installations\u003c\/li\u003e\n\u003cli\u003eCompact nickel-plated zinc diecast housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eWideband 5–2400 MHz coverage handles all modern broadcast standards in a single unit\u003c\/li\u003e\n\u003cli\u003eControlled tap attenuation ensures each outlet receives a reliable, balanced signal level\u003c\/li\u003e\n\u003cli\u003eHigh port isolation minimises cross-talk between connected outputs\u003c\/li\u003e\n\u003cli\u003eProfessional-grade build quality for long-term, maintenance-free operation\u003c\/li\u003e\n\u003cli\u003eCompact dimensions fit neatly into distribution enclosures and concealed installations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2400 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Tap Outputs:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss:\u003c\/strong\u003e \u0026lt;16 dB (5–1550 MHz) \/ \u0026lt;18 dB (1551–2150 MHz) \/ \u0026lt;20 dB (2151–2400 MHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e \u0026lt;5 dB (5–2150 MHz) \/ \u0026lt;6 dB (2151–2400 MHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Isolation:\u003c\/strong\u003e \u0026gt;25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e F-type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes (1 port)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Nickel-plated zinc diecast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Passive (no power required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 57 × 120 × 25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 5404041100784\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eThe Johansson 4561 delivers professional-grade signal distribution with the reliability and build quality expected from a leading Scandinavian broadcast equipment manufacturer — ideal for any multi-outlet TV installation.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563367149950,"sku":"204124","price":11.53,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671313760638.webp?v=1779626728"},{"product_id":"johansson-4563","title":"Johansson 4563 6-Way SAT\/TV Passive Tap – 5-2400 MHz, 25 dB Tap Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4563 is a professional 6-way passive tap for distributing TV and satellite signals across multiple outlets with high tap attenuation of 25 dB. Its wideband 5–2400 MHz coverage handles terrestrial, cable, and satellite IF signals in a single compact unit.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor installation in residential and commercial distribution systems, the 4563 features extremely low insertion loss (\u0026lt;2 dB up to 2150 MHz), making it the ideal choice when preserving signal strength on the main trunk line is critical.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e6-way passive tap covering 5–2400 MHz (DVB-T\/T2, DVB-C, SAT IF)\u003c\/li\u003e\n\u003cli\u003eHigh tap attenuation: \u0026lt;25 dB (5–1550 MHz), \u0026lt;28 dB (up to 2400 MHz)\u003c\/li\u003e\n\u003cli\u003eVery low insertion loss: \u0026lt;2 dB (5–2150 MHz), \u0026lt;3 dB (2151–2400 MHz)\u003c\/li\u003e\n\u003cli\u003eHigh port isolation \u0026gt;30 dB across all frequency bands\u003c\/li\u003e\n\u003cli\u003eDC power pass on 1 port for powering active antennas or amplifiers\u003c\/li\u003e\n\u003cli\u003eF-type connectors throughout for reliable, interference-free connections\u003c\/li\u003e\n\u003cli\u003eCompact nickel-plated zinc diecast housing\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eVery low insertion loss keeps the trunk-line signal virtually intact for further distribution\u003c\/li\u003e\n\u003cli\u003eHigh tap attenuation (25 dB) perfectly suited for drops from a strong main distribution line\u003c\/li\u003e\n\u003cli\u003eExcellent port isolation \u0026gt;30 dB minimises cross-talk between connected outlets\u003c\/li\u003e\n\u003cli\u003eWideband 5–2400 MHz handles all modern broadcast standards in a single device\u003c\/li\u003e\n\u003cli\u003eProfessional-grade construction for long-term, maintenance-free operation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2400 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Tap Outputs:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss:\u003c\/strong\u003e \u0026lt;25 dB (5–1550 MHz) \/ \u0026lt;27 dB (1551–2150 MHz) \/ \u0026lt;28 dB (2151–2400 MHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e \u0026lt;2 dB (5–2150 MHz) \/ \u0026lt;3 dB (2151–2400 MHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Isolation:\u003c\/strong\u003e \u0026gt;30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e F-type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes (1 port)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Nickel-plated zinc diecast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Passive (no power required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 57 × 120 × 25 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 5404041100807\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eThe Johansson 4563 delivers the low insertion loss and high tap attenuation combination that professional antenna installers demand — ensuring every outlet in a multi-room installation receives the correct signal level.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563370754430,"sku":"204126","price":11.53,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671314678142.webp?v=1779626737"},{"product_id":"johansson-4581","title":"Johansson 4581 8-Way SAT\/TV Passive Tap – 5-2300 MHz, 16 dB Tap Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4581 is a professional 8-way passive tap for distributing TV and satellite signals from a main trunk line to up to eight separate outlets simultaneously. With a tap loss of 16 dB and a frequency range covering 5–2300 MHz, it supports all terrestrial, cable and satellite IF distribution applications.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor installation in residential blocks, MDUs, and commercial antenna distribution systems, the 4581 features a compact nickel-plated zinc diecast housing with F-type connectors and DC power pass capability for powering active antennas or line amplifiers.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8-way passive tap covering 5–2300 MHz (DVB-T\/T2, DVB-C, SAT IF)\u003c\/li\u003e\n\u003cli\u003eTap loss 16 dB (±2 dB) for controlled, predictable signal distribution\u003c\/li\u003e\n\u003cli\u003eThrough (insertion) loss \u0026lt;5 dB, preserving signal on the main trunk line\u003c\/li\u003e\n\u003cli\u003eTap-to-tap and output-to-tap isolation \u0026gt;20 dB\u003c\/li\u003e\n\u003cli\u003eDC power pass (input\/output) for powering active components inline\u003c\/li\u003e\n\u003cli\u003eF-type connectors throughout for reliable, interference-free connections\u003c\/li\u003e\n\u003cli\u003eNickel-plated zinc diecast housing — compact and robust\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8 simultaneous tap ports enable multi-room or multi-flat distribution from a single cable run\u003c\/li\u003e\n\u003cli\u003ePredictable 16 dB tap attenuation simplifies system level calculations\u003c\/li\u003e\n\u003cli\u003eLow trunk-line insertion loss keeps the main distribution signal intact for further cascade\u003c\/li\u003e\n\u003cli\u003eProfessional Scandinavian build quality ensures long-term, maintenance-free performance\u003c\/li\u003e\n\u003cli\u003eCompact form factor fits easily in distribution boxes and concealed enclosures\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Tap Outputs:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss:\u003c\/strong\u003e 16 dB (±2 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss (Through):\u003c\/strong\u003e \u0026lt;5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePort Isolation:\u003c\/strong\u003e \u0026gt;20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss:\u003c\/strong\u003e \u0026gt;10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e F-type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes (input\/output)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Nickel-plated zinc diecast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Passive (no power required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 57 × 120 × 25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eThe Johansson 4581 is the go-to solution for professional installers who need to distribute a single antenna feed to eight outlets without compromising signal quality — delivering the reliability and precision that Johansson is known for worldwide.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563371966846,"sku":"204127","price":13.09,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671315136894.webp?v=1779626741"},{"product_id":"johansson-4582","title":"Johansson 4582 8-Way SAT\/TV Passive Tap – 5-2300 MHz, 20 dB Tap Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4582 is a professional 8-way passive tap for distributing TV and satellite signals from a main trunk line to up to eight separate outlets simultaneously. With a tap loss of 20 dB and a frequency range of 5–2300 MHz, it is suited to installations where a higher tap attenuation is needed to balance signal levels across a larger distribution network.\u003c\/p\u003e\n\u003cp\u003eDesigned for indoor installation in residential blocks, MDUs and commercial antenna systems, the 4582 shares the same compact nickel-plated zinc diecast housing and F-type connector standard as the full Johansson 45xx tap series.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8-way passive tap covering 5–2300 MHz (DVB-T\/T2, DVB-C, SAT IF)\u003c\/li\u003e\n\u003cli\u003eTap loss 20 dB for controlled, predictable signal distribution\u003c\/li\u003e\n\u003cli\u003eLow through (insertion) loss preserving signal on the main trunk line\u003c\/li\u003e\n\u003cli\u003eDC power pass for powering active antennas or inline amplifiers\u003c\/li\u003e\n\u003cli\u003eF-type connectors throughout for reliable, interference-free connections\u003c\/li\u003e\n\u003cli\u003eNickel-plated zinc diecast housing — compact and durable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHigher 20 dB tap attenuation ideal for closer tap-offs from high-level distribution lines\u003c\/li\u003e\n\u003cli\u003e8 simultaneous output ports support multi-room or multi-flat installations from one cable run\u003c\/li\u003e\n\u003cli\u003eLow trunk-line through loss keeps the main signal intact for further cascade taps\u003c\/li\u003e\n\u003cli\u003eConsistent build quality across the 45xx series simplifies mixed-tap installations\u003c\/li\u003e\n\u003cli\u003eProfessional Johansson reliability for long-term, maintenance-free performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Tap Outputs:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e F-type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Nickel-plated zinc diecast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Passive (no power required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 57 × 120 × 25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eThe Johansson 4582 gives professional installers the 20 dB tap loss variant they need to correctly level signals in larger multi-outlet antenna distribution systems — built to the exacting standards Johansson is known for worldwide.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563372720510,"sku":"204128","price":13.11,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671315693950.webp?v=1779626746"},{"product_id":"johansson-4583","title":"Johansson 4583 8-Way SAT\/TV Passive Tap – 5-2300 MHz, 25 dB Tap Loss \u0026 DC Pass","description":"\u003cp\u003eThe Johansson 4583 is a professional 8-way passive tap for distributing TV and satellite signals from a main trunk line to up to eight outlets simultaneously. With a high tap loss of 25 dB and a frequency range of 5–2300 MHz, it is designed for installations where significant signal isolation between the trunk line and tap outputs is required.\u003c\/p\u003e\n\u003cp\u003eSuitable for indoor use in residential blocks, MDUs and commercial antenna distribution systems, the 4583 features the same robust nickel-plated zinc diecast housing and F-type connectors as the full Johansson 45xx passive tap series.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8-way passive tap covering 5–2300 MHz (DVB-T\/T2, DVB-C, SAT IF)\u003c\/li\u003e\n\u003cli\u003eHigh tap loss of 25 dB providing significant signal isolation at tap ports\u003c\/li\u003e\n\u003cli\u003eVery low through (insertion) loss preserving the main trunk-line signal\u003c\/li\u003e\n\u003cli\u003eDC power pass for powering active antennas or inline amplifiers\u003c\/li\u003e\n\u003cli\u003eF-type connectors throughout for secure, interference-free connections\u003c\/li\u003e\n\u003cli\u003eNickel-plated zinc diecast housing — compact, durable and easy to install\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e25 dB tap attenuation ideal for close-in taps near a high-level signal source or headend output\u003c\/li\u003e\n\u003cli\u003e8 simultaneous tap ports support multi-room and multi-flat TV distribution from a single cable\u003c\/li\u003e\n\u003cli\u003eMinimal trunk-line loss enables long cascade chains without intermediate amplification\u003c\/li\u003e\n\u003cli\u003eConsistent 45xx series design simplifies system planning in mixed-attenuation installations\u003c\/li\u003e\n\u003cli\u003eProfessional Johansson quality ensures reliable, long-term performance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Tap Outputs:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e F-type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Pass:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHousing:\u003c\/strong\u003e Nickel-plated zinc diecast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e Passive (no power required)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 57 × 120 × 25 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cp\u003eThe Johansson 4583 is the high-attenuation variant in the 45xx tap series — the right choice for professional installers who need deep signal isolation at the tap port while keeping the main distribution line signal level intact.\u003c\/p\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563376161150,"sku":"204129","price":13.11,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671316251006.webp?v=1779626750"},{"product_id":"sab-satellite-l-104","title":"SAB Satellite L 104 Galvanized Steel L-Bracket – 500 mm Arm, 42 mm Tube \u0026 100 cm Dish","description":"\u003cp\u003eThe SAB Satellite L 104 is an L-shaped bracket designed for wall-mounting satellite dishes of up to 100 cm diameter. Constructed from galvanized steel, it resists corrosion and provides a firm, weather-resistant foundation for outdoor dish installations.\u003c\/p\u003e\u003cp\u003eThe bracket's L-profile positions the dish away from the wall surface, reducing multipath interference from reflections. The 500 mm arm length and 42 mm tube diameter accommodate standard dish mast connections, while the 300×270×5 mm mounting plate distributes load across the wall surface.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eL-shaped bracket for wall mounting\u003c\/li\u003e\n\u003cli\u003eGalvanized steel construction for corrosion resistance\u003c\/li\u003e\n\u003cli\u003eCompatible with satellite dishes up to 100 cm diameter\u003c\/li\u003e\n\u003cli\u003e42 mm tube diameter for standard dish mast fitting\u003c\/li\u003e\n\u003cli\u003e300×270×5 mm mounting plate for solid wall attachment\u003c\/li\u003e\n\u003cli\u003e500 mm arm length, 250 mm height\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGalvanized steel finish withstands prolonged outdoor exposure without rusting\u003c\/li\u003e\n\u003cli\u003eL-profile keeps the dish clear of the wall, improving signal reception by reducing reflections\u003c\/li\u003e\n\u003cli\u003e100 cm dish capacity covers the majority of residential and small commercial dish sizes\u003c\/li\u003e\n\u003cli\u003eLarge mounting plate spreads load across the wall, reducing stress on fixings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SAB Satellite L 104\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e L-shaped wall mount bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible dish size:\u003c\/strong\u003e Up to 100 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube diameter:\u003c\/strong\u003e 42 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 500 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate dimensions:\u003c\/strong\u003e 300×270×5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo special tools required for standard installation — fits directly onto masonry or concrete walls\u003c\/li\u003e\n\u003cli\u003eGalvanized finish means no repainting or anti-rust treatment needed over time\u003c\/li\u003e\n\u003cli\u003ePairs with standard LNB masts without adapters thanks to the 42 mm tube specification\u003c\/li\u003e\n\u003cli\u003eSAB Satellite is a recognised brand in satellite hardware, ensuring consistent component quality\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SAB Satellite","offers":[{"title":"Default Title","offer_id":56563380617598,"sku":"218104","price":16.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671316840830.webp?v=1779626767"},{"product_id":"sab-satellite-l-401","title":"SAB Satellite L 401 Aluminium L-Bracket – 350 mm Arm, 50 mm Tube \u0026 up to 100 cm Dish","description":"\u003cp\u003eThe SAB Satellite L 401 is an L-shaped bracket for wall-mounting satellite dishes of up to 100 cm diameter. Manufactured from aluminium, it is lighter than galvanized steel equivalents while remaining structurally sound for standard outdoor dish installations.\u003c\/p\u003e\u003cp\u003eThe bracket features a 50 mm tube diameter — larger than the L 104 — which fits a wider range of dish mast profiles. The 150×150×5 mm mounting plate provides a compact footprint for wall attachment, while the 350 mm arm length and 250 mm height position the dish at a practical distance from the wall surface.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eL-shaped bracket for wall mounting\u003c\/li\u003e\n\u003cli\u003eAluminium construction for a lightweight build\u003c\/li\u003e\n\u003cli\u003eCompatible with satellite dishes up to 100 cm diameter\u003c\/li\u003e\n\u003cli\u003e50 mm tube diameter for a wider range of mast profiles\u003c\/li\u003e\n\u003cli\u003e150×150×5 mm mounting plate\u003c\/li\u003e\n\u003cli\u003e350 mm arm length, 250 mm height\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAluminium material reduces overall bracket weight, simplifying single-person installation\u003c\/li\u003e\n\u003cli\u003e50 mm tube diameter accommodates heavier-duty or larger-diameter mast profiles not supported by 42 mm brackets\u003c\/li\u003e\n\u003cli\u003eCompact 150×150 mm plate reduces the number of wall fixings required for secure attachment\u003c\/li\u003e\n\u003cli\u003eL-profile offsets the dish from the wall, improving line-of-sight to the satellite\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SAB Satellite L 401\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e L-shaped wall mount bracket\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible dish size:\u003c\/strong\u003e Up to 100 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTube diameter:\u003c\/strong\u003e 50 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 250 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 350 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate dimensions:\u003c\/strong\u003e 150×150×5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLighter weight compared to steel brackets makes transport and installation on upper floors easier\u003c\/li\u003e\n\u003cli\u003eThe larger 50 mm tube suits installers who standardise on larger-diameter masts across their jobs\u003c\/li\u003e\n\u003cli\u003eAluminium naturally resists oxidation, reducing long-term maintenance requirements\u003c\/li\u003e\n\u003cli\u003eSAB Satellite bracket range offers clear size and material options to match any installation requirement\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SAB Satellite","offers":[{"title":"Default Title","offer_id":56563390906750,"sku":"218114","price":15.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671319396734.webp?v=1779626800"},{"product_id":"sab-satellite-m109","title":"SAB Satellite M109 Galvanized Steel M-Type Wall Mount – 380 mm Height \u0026 30x5 mm Plate","description":"\u003cp\u003eThe SAB Satellite M109 is an M-type (saddle\/clamp-style) wall mount made from galvanized steel, used to fix pipes or rails firmly against a wall. It is commonly used in satellite and antenna installations to secure the mast or conduit runs to the building structure.\u003c\/p\u003e\u003cp\u003eThe galvanized steel construction provides lasting resistance to outdoor weathering. At 380 mm in height with a 30×5 mm profile plate, the M109 is suited to applications requiring a taller mount — holding the mast at a fixed point higher up the wall compared to shorter M-type options.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM-type (saddle\/clamp) wall mount design for pipes and rails\u003c\/li\u003e\n\u003cli\u003eGalvanized steel construction for outdoor corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHeight: 380 mm\u003c\/li\u003e\n\u003cli\u003ePlate profile: 30×5 mm\u003c\/li\u003e\n\u003cli\u003eWall-mounted adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eGalvanized steel withstands prolonged outdoor exposure without requiring additional surface treatment\u003c\/li\u003e\n\u003cli\u003eM-type profile grips cylindrical pipes and rails securely, preventing movement or vibration\u003c\/li\u003e\n\u003cli\u003e380 mm height positions the fastening point higher on the mast, distributing stress along the pole\u003c\/li\u003e\n\u003cli\u003eCompatible with standard pipe and mast diameters used in antenna installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SAB Satellite M109\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e M-type wall mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 380 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate dimensions:\u003c\/strong\u003e 30×5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eStraightforward bolt-to-wall design requires minimal installation hardware\u003c\/li\u003e\n\u003cli\u003eGalvanized finish eliminates the need for repainting or rust treatment in outdoor environments\u003c\/li\u003e\n\u003cli\u003eSAB Satellite's M-type range covers multiple heights, allowing the correct support point to be selected for each mast length\u003c\/li\u003e\n\u003cli\u003eDurable enough for long-term outdoor installation on brick, concrete, or rendered walls\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SAB Satellite","offers":[{"title":"Default Title","offer_id":56563456115070,"sku":"218135","price":15.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671328473470.webp?v=1779626885"},{"product_id":"sab-satellite-m110","title":"SAB Satellite M110 Galvanized Steel M-Type Wall Mount – 480 mm Height \u0026 30x5 mm Plate","description":"\u003cp\u003eThe SAB Satellite M110 is an M-type (saddle\/clamp-style) wall mount made from galvanized steel, designed to fix pipes or rails securely to a wall surface. It serves the same function as the M109 but stands 100 mm taller at 480 mm, placing the clamp point further up the mast or conduit for installations where a higher fastening position is required.\u003c\/p\u003e\u003cp\u003eThe galvanized steel construction ensures durability in outdoor environments. The 30×5 mm plate profile is identical to the M109, maintaining compatibility with the same range of pipe diameters and installation hardware.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eM-type (saddle\/clamp) wall mount design for pipes and rails\u003c\/li\u003e\n\u003cli\u003eGalvanized steel construction for outdoor corrosion resistance\u003c\/li\u003e\n\u003cli\u003eHeight: 480 mm\u003c\/li\u003e\n\u003cli\u003ePlate profile: 30×5 mm\u003c\/li\u003e\n\u003cli\u003eWall-mounted adjustment\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e480 mm height positions the clamp 100 mm higher than the M109, providing more mast support on taller installations\u003c\/li\u003e\n\u003cli\u003eGalvanized steel requires no additional surface treatment and resists rust in exposed outdoor conditions\u003c\/li\u003e\n\u003cli\u003eM-type profile grips cylindrical pipes securely, minimising movement or wind-induced vibration on the mast\u003c\/li\u003e\n\u003cli\u003eConsistent 30×5 mm plate profile across the M-type range simplifies stock management for installers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SAB Satellite M110\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e M-type wall mount\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdjustment:\u003c\/strong\u003e Wall\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Galvanized steel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHeight:\u003c\/strong\u003e 480 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePlate dimensions:\u003c\/strong\u003e 30×5 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe extra height over the M109 makes it the right choice when the mast needs a support point further from the base\u003c\/li\u003e\n\u003cli\u003eGalvanized finish ensures no maintenance is needed for years of outdoor use\u003c\/li\u003e\n\u003cli\u003eSimple bolt-to-wall design with minimal fixings required\u003c\/li\u003e\n\u003cli\u003ePart of SAB Satellite's coordinated mounting range, making it easy to combine multiple mount types on the same installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SAB Satellite","offers":[{"title":"Default Title","offer_id":56563468271998,"sku":"218136","price":18.6,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671329194366.webp?v=1779626890"},{"product_id":"johansson-9920","title":"Johansson 9920 DiSEqC Option-Twin Switch – 4 SAT + 1 TERR, 2 Outputs \u0026 DiSEqC 1.0\/1.1","description":"\u003cp\u003eThe Johansson 9920 is a DiSEqC Option-Twin switch configured for 4 satellite inputs plus 1 terrestrial input, delivering 2 outputs. It is engineered for systems using 2 twin LNBs paired with an option switch and 2 four-satellite multiswitches, enabling a single installation to serve multiple satellite positions and terrestrial sources simultaneously.\u003c\/p\u003e\u003cp\u003eThe switch handles both satellite IF (950–2150 MHz) and terrestrial (5–862 MHz) signals on separate paths with dedicated isolation between them, ensuring that satellite and terrestrial signals do not interfere with each other at any output.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4 SAT inputs + 1 TERR input, 2 outputs\u003c\/li\u003e\n\u003cli\u003eDesigned for 2 twin LNBs with option switch and 2 four-satellite multiswitches\u003c\/li\u003e\n\u003cli\u003eDiSEqC switching control: 1.0 \/ 1.1 and Tone Burst\u003c\/li\u003e\n\u003cli\u003eSAT frequency range: 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003eTERR frequency range: 5–862 MHz\u003c\/li\u003e\n\u003cli\u003eSAT\/TERR isolation: 30 dB\u003c\/li\u003e\n\u003cli\u003eInter-input isolation: 40 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e40 dB isolation between satellite inputs prevents signal cross-contamination when switching between LNBs\u003c\/li\u003e\n\u003cli\u003e30 dB SAT\/TERR isolation keeps satellite and terrestrial signal paths cleanly separated\u003c\/li\u003e\n\u003cli\u003eDiSEqC 1.0\/1.1 and Tone Burst compatibility ensures operation with a wide range of receivers\u003c\/li\u003e\n\u003cli\u003eLow current draw of 20 mA max reduces the power budget impact on the overall distribution system\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Johansson 9920\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e DiSEqC Option-Twin switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 × SAT + 1 TERR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT Frequency Range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTERR Frequency Range:\u003c\/strong\u003e 5–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Loss (SAT):\u003c\/strong\u003e 4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Loss (TERR):\u003c\/strong\u003e 8 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation between inputs:\u003c\/strong\u003e 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT\/TERR Isolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBypass control:\u003c\/strong\u003e —\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching control:\u003c\/strong\u003e DiSEqC 1.0 \/ 1.1 \u0026amp; Tone Burst\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption:\u003c\/strong\u003e 20 mA max\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 112×98×56 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIntegrates natively into complex multi-satellite, multi-receiver setups without requiring additional active components\u003c\/li\u003e\n\u003cli\u003eCompact 112×98×56 mm enclosure fits inside standard distribution cabinets\u003c\/li\u003e\n\u003cli\u003ePassive design with minimal current draw keeps the installation straightforward and the power budget manageable\u003c\/li\u003e\n\u003cli\u003eJohansson's heritage in professional signal distribution equipment backs the 9920's build and electrical consistency\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563490161022,"sku":"206215","price":29.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671329751422.webp?v=1779626894"},{"product_id":"sab-satellite-sab-k033-10-1-diseqc-switch","title":"SAB K033 10\/1 DiSEqC Switch – 10 LNB Inputs, 950-2150 MHz \u0026 Outdoor Rain Cap","description":"\u003cp\u003eThe SAB K033 allows a single-tuner receiver — which typically has only one coaxial input — to access up to 10 separate LNBs, each pointing at a different satellite. Ten coaxial cables run from the LNBs to the switch, and a single cable connects the switch output to the receiver. The receiver sends DiSEqC commands to select which LNB is active, enabling satellite switching without any mechanical movement.\u003c\/p\u003e\u003cp\u003eThe switch is rated for outdoor use, fitted with a rain cap to keep moisture out of the housing. All ports use F-type female connectors, matching the standard coaxial termination used across satellite installations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e10 LNB inputs to 1 receiver output\u003c\/li\u003e\n\u003cli\u003eSwitches between up to 10 different satellites without a motor\u003c\/li\u003e\n\u003cli\u003eDiSEqC switching signal protocol\u003c\/li\u003e\n\u003cli\u003eRain cap included for weatherproof outdoor installation\u003c\/li\u003e\n\u003cli\u003eAll ports: F-type female connectors\u003c\/li\u003e\n\u003cli\u003e75 Ω impedance on all ports\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAccessing 10 satellites from one receiver requires only one cable run to the receiver — no additional tuners or splitters needed\u003c\/li\u003e\n\u003cli\u003eNo motor means no moving parts to fail and no need for motor alignment during installation\u003c\/li\u003e\n\u003cli\u003eRain cap protects internal connections from water ingress in outdoor mounting locations\u003c\/li\u003e\n\u003cli\u003eDC pass capability (up to 500 mA) powers LNBs through the switch without separate power supplies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e SAB K033\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e 10\/1 DiSEqC switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 10\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss:\u003c\/strong\u003e 3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss:\u003c\/strong\u003e 8 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Voltage:\u003c\/strong\u003e 12–20 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Consumption:\u003c\/strong\u003e 10 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Max Power Passing:\u003c\/strong\u003e 500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance (all ports):\u003c\/strong\u003e 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching Signal:\u003c\/strong\u003e DiSEqC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnectors:\u003c\/strong\u003e F-type female\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackaging:\u003c\/strong\u003e 50 × SAB K033\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSold in packs of 50 for cost-effective bulk purchasing by installers and distributors\u003c\/li\u003e\n\u003cli\u003e3 dB insertion loss is low for a 10-way device, preserving signal quality to the receiver\u003c\/li\u003e\n\u003cli\u003eThe included rain cap removes the need to source a separate weatherproofing solution\u003c\/li\u003e\n\u003cli\u003eStraightforward installation — connect 10 LNB cables in, one cable out to the receiver, done\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"SAB Satellite","offers":[{"title":"Default Title","offer_id":56563509854590,"sku":"206218","price":24.55,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671330242942.webp?v=1779626900"},{"product_id":"marmitek-gigaview-821-hdmi-html","title":"Marmitek GigaView 821 Wireless HDMI Transmitter – 5.1-5.6 GHz, Full HD 1080p \u0026 IR Extender","description":"\u003cp\u003eThe Marmitek GigaView 821 replaces a long HDMI cable run by transmitting the HD signal over the 5.1–5.6 GHz wireless band. The transmitter accepts two HDMI sources and includes a loop-through HDMI output so you can continue watching locally on a first screen while the same content streams to a second HDTV or projector via the receiver.\u003c\/p\u003e\u003cp\u003eThe system supports Full HD up to 1080p and all major 3D formats, transmitting the signal uncompressed with a latency of under 1 ms. The integrated IR extender lets you point your remote at the receiver in another room to control source devices that remain in a closed cabinet near the transmitter.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWireless HDMI transmission over 5.1–5.6 GHz at up to 25 m line-of-sight and 12 m non-LOS\u003c\/li\u003e\n\u003cli\u003eSupports Full HD resolutions: 480p, 576p, 720p, 1080i, 1080p\u003c\/li\u003e\n\u003cli\u003eSupports 3D formats: 1080p@23.98\/24 Hz, 720p@59.94\/60\/50 Hz\u003c\/li\u003e\n\u003cli\u003eUncompressed HD signal transmission with latency below 1 ms\u003c\/li\u003e\n\u003cli\u003e2x HDMI inputs on the transmitter with 1x HDMI loop-through output (built-in HDMI splitter)\u003c\/li\u003e\n\u003cli\u003eIR extender: supports 36 kHz–56 kHz infrared frequencies\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTwo HDMI inputs allow switching between two sources (Blu-ray, satellite receiver, games console) without replugging cables\u003c\/li\u003e\n\u003cli\u003eThe HDMI loop-through output keeps your primary display connected to the transmitter, so both a local screen and a remote screen receive the same content simultaneously\u003c\/li\u003e\n\u003cli\u003eUnder-1 ms latency makes the system suitable for gaming on a remote screen without perceptible input delay\u003c\/li\u003e\n\u003cli\u003eThe IR extender means AV equipment can be kept neatly inside a cabinet while still being operated with a regular remote control from a different room\u003c\/li\u003e\n\u003cli\u003eThe 5.1–5.6 GHz band avoids the congested 2.4 GHz range used by most Wi-Fi routers, reducing interference\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported HDTV Resolutions:\u003c\/strong\u003e 480p, 576p, 720p, 1080i, 1080p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported 3D Formats:\u003c\/strong\u003e 1080p@23.98\/24 Hz, 720p@59.94\/60\/50 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Frequency:\u003c\/strong\u003e 5.1–5.6 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Range (LOS):\u003c\/strong\u003e Up to 25 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Range (non-LOS):\u003c\/strong\u003e Up to 12 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSystem Latency:\u003c\/strong\u003e \u0026lt;1 ms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitter HDMI Input:\u003c\/strong\u003e 2x HDMI (19-pin female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitter HDMI Output:\u003c\/strong\u003e 1x HDMI (19-pin female), built-in HDMI splitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver HDMI Output:\u003c\/strong\u003e 1x HDMI (19-pin female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIR Frequency Range:\u003c\/strong\u003e 36 kHz–56 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 100–240 VAC @ 50–60 Hz, 5 VDC 3 A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe complete kit includes transmitter, receiver, remote control, HDMI cable, IR LED extender cable, two power supplies, mounting plugs and screws, and a user manual — everything needed for installation\u003c\/li\u003e\n\u003cli\u003eThe receiver can be mounted out of sight behind the TV or on the ceiling beside a projector, eliminating visible cable runs\u003c\/li\u003e\n\u003cli\u003eUncompressed transmission preserves the original HD picture and audio quality with no compression artefacts\u003c\/li\u003e\n\u003cli\u003eThe dual power supplies in the box mean both transmitter and receiver are powered independently with no additional purchases required\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marmitek","offers":[{"title":"Default Title","offer_id":56563550978430,"sku":"250143","price":368.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671331586430.webp?v=1779626911"},{"product_id":"marmitek-gigaview-545","title":"Marmitek GigaView 545 Wireless AV Transmitter – 5.8 GHz, Stereo Audio \u0026 Multi-Room Video","description":"\u003cp\u003eThe Marmitek GigaView 545 is a wireless AV transmission system that sends video and stereo audio from any source device to a second television through walls and ceilings. It works with any brand of DVD player, satellite receiver, decoder, or similar source, making it a flexible solution for extending viewing to a second room.\u003c\/p\u003e\u003cp\u003eThe system uses the 5.8 GHz frequency band, which keeps it free from interference caused by microwave ovens, WiFi networks, and Bluetooth devices operating on lower frequencies. The compact receiver can be mounted out of sight behind the TV or on the ceiling next to a projector.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWireless transmission of video and stereo audio through walls and ceilings\u003c\/li\u003e\n\u003cli\u003eOperates on the 5.8 GHz band, avoiding interference from microwave ovens, WiFi, and Bluetooth\u003c\/li\u003e\n\u003cli\u003eCompatible with any brand of DVD player, satellite receiver, decoder, or similar source device\u003c\/li\u003e\n\u003cli\u003eReceiver can be mounted behind the TV or on the ceiling next to a projector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEliminates the need to run AV cables between rooms, keeping walls and ceilings clear\u003c\/li\u003e\n\u003cli\u003e5.8 GHz operation means the signal is not disrupted by common household wireless devices\u003c\/li\u003e\n\u003cli\u003eWorks with existing equipment regardless of brand, so no source device replacement is needed\u003c\/li\u003e\n\u003cli\u003eDiscreet receiver mounting keeps the installation tidy in a living room or bedroom\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSignal Transmission:\u003c\/strong\u003e Wireless\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio:\u003c\/strong\u003e Stereo\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Frequency:\u003c\/strong\u003e 5.8 GHz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWatch digital TV channels on a second TV without a second subscription or decoder box\u003c\/li\u003e\n\u003cli\u003eNo drilling or cable runs between rooms — the system works wirelessly out of the box\u003c\/li\u003e\n\u003cli\u003eSmall receiver dimensions allow hidden installation behind the TV panel\u003c\/li\u003e\n\u003cli\u003eCompatible with any source device that has an A\/V output\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marmitek","offers":[{"title":"Default Title","offer_id":56563565429118,"sku":"250144","price":42.9,"currency_code":"EUR","in_stock":false}]},{"product_id":"marmitek-megaview-60-hdmi-extender-html","title":"Marmitek MegaView 60 HDMI Extender over CAT5\/6 – 1080p 30 m, HDCP \u0026 Dolby TrueHD","description":"\u003cp\u003eThe Marmitek MegaView 60 consists of a transmitter and a receiver unit connected by two CAT5e or CAT6 Ethernet cables. The transmitter takes a single HDMI input from a source device — such as a Blu-ray player, HD set-top box, media centre PC, or games console — and the receiver delivers the HDMI output to a display or projector up to 60 metres away at 480p, or 30 metres at full 1080p.\u003c\/p\u003e\u003cp\u003eThe system supports HDMI, DVI, and HDCP standards and carries uncompressed HD video with a maximum single-link bit rate of 1.65 Gbps. High-definition audio formats including LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio pass through the link without degradation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eExtends HDMI or DVI signal over two CAT5e\/6 cables — 60 m at 480p, 30 m at 1080p\u003c\/li\u003e\n\u003cli\u003eSupports HDTV resolutions: 480p, 576i, 576p, 720p, 1080i, 1080p\u003c\/li\u003e\n\u003cli\u003eMaximum single-link bit rate: 1.65 Gbps\u003c\/li\u003e\n\u003cli\u003eCompatible standards: HDMI, DVI, HDCP\u003c\/li\u003e\n\u003cli\u003ePasses LPCM 7.1CH, Dolby TrueHD, and DTS-HD Master Audio\u003c\/li\u003e\n\u003cli\u003eTransmitter video signal input: 0.5–1.0 V p-p; DDC signal input: 5 V p-p\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eUsing existing CAT5e or CAT6 infrastructure (such as structured home wiring) avoids the need to install a dedicated long HDMI cable\u003c\/li\u003e\n\u003cli\u003eFull 1080p is maintained over the 30 m run, so picture quality at the remote display matches the source\u003c\/li\u003e\n\u003cli\u003eHigh-definition audio formats pass through unchanged, preserving surround-sound performance from a Blu-ray or HD source\u003c\/li\u003e\n\u003cli\u003eA single power adapter connects to the receiver only — no power connection is needed at the transmitter end\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Resolutions:\u003c\/strong\u003e 480p, 576i, 576p, 720p, 1080i, 1080p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Output Standard:\u003c\/strong\u003e HDMI V1.2a\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported Standards:\u003c\/strong\u003e HDMI, DVI, HDCP\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Single-Link Bit Rate:\u003c\/strong\u003e 1.65 Gbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitter HDMI Input:\u003c\/strong\u003e 1x HDMI (19-pin female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitter Video Signal Input:\u003c\/strong\u003e 0.5–1.0 V p-p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitter DDC Signal Input:\u003c\/strong\u003e 5 V p-p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceiver HDMI Output:\u003c\/strong\u003e 1x HDMI (19-pin female)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax CAT5e\/6 Cable Length (480p):\u003c\/strong\u003e 60 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax CAT5e\/6 Cable Length (1080p):\u003c\/strong\u003e 30 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e 100–240 VAC @ 50–60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Output:\u003c\/strong\u003e 5 VDC @ 2 A\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe kit includes transmitter, receiver, power adapter, and user manual — no additional cables are included but only two CAT5e\/6 cables and an HDMI cable at each end are needed to complete the installation\u003c\/li\u003e\n\u003cli\u003eThe receiver-only power arrangement keeps installation at the source end clean and cable-free beyond the CAT5e\/6 run\u003c\/li\u003e\n\u003cli\u003eCAT5e and CAT6 cables are widely available and easy to route through walls, making the installation less disruptive than running a thick HDMI cable the same distance\u003c\/li\u003e\n\u003cli\u003eHDCP support ensures compatibility with protected content from Blu-ray players and broadcast set-top boxes\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Marmitek","offers":[{"title":"Default Title","offer_id":56563567427966,"sku":"250060","price":51.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671335387518.webp?v=1779626954"},{"product_id":"fracarro-utp-rxtx","title":"Fracarro UTP-RXTX Passive CCTV Video Balun Pair – BNC to CAT5\/6, 400 m Colour \u0026 IP50","description":"\u003cp\u003eThe Fracarro UTP-RXTX is a pair of passive transceivers designed to extend CCTV camera video signals over UTP (CAT5\/6) or FTP structured cabling instead of traditional coaxial cable. Each unit functions as both a transmitter and a receiver, making the pair interchangeable at either end of the cable run.\u003c\/p\u003e\u003cp\u003eThe transceivers use BNC connectors on the camera\/recorder side and UTP\/FTP terminations on the cable side, requiring no external power supply. Maximum transmission distance is 400 m for colour signals and 600 m for monochrome. With IP50 protection, the units are resistant to dust ingress for use in typical indoor CCTV installations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eEach unit operates as both transmitter and receiver — one pair per camera\u003c\/li\u003e\n\u003cli\u003eCompatible with UTP CAT5\/6 and FTP cable types\u003c\/li\u003e\n\u003cli\u003eBNC video input\/output (1 Vpp, 75 Ω) on the camera\/DVR side\u003c\/li\u003e\n\u003cli\u003ePassive operation — no external power supply required (0 W consumption)\u003c\/li\u003e\n\u003cli\u003eIP50 dust protection rating\u003c\/li\u003e\n\u003cli\u003eMaximum transmission distance: 400 m (colour) \/ 600 m (monochrome)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReplaces costly coaxial cable runs with existing or new structured cabling infrastructure\u003c\/li\u003e\n\u003cli\u003eInterchangeable transmitter\/receiver design simplifies stock management and on-site wiring\u003c\/li\u003e\n\u003cli\u003ePassive design eliminates the need to run power to the balun location\u003c\/li\u003e\n\u003cli\u003eCompact size fits in wall boxes or cable trays without additional housings\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs Transmitter — Video Input:\u003c\/strong\u003e 1 × BNC, 1 Vpp, 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs Transmitter — Video Output:\u003c\/strong\u003e 1 × UTP\/FTP CAT5\/6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs Receiver — Video Input:\u003c\/strong\u003e 1 × UTP\/FTP CAT5\/6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAs Receiver — Video Output:\u003c\/strong\u003e 1 × BNC, 1 Vpp, 75 Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection Rating:\u003c\/strong\u003e IP50\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Transmission Distance (Colour):\u003c\/strong\u003e 400 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Transmission Distance (Monochrome):\u003c\/strong\u003e 600 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 0 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e −10 ÷ +40 °C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L × W × H):\u003c\/strong\u003e 15.8 × 14.5 × 145 mm (with 110 mm cable)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 25 g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePair format means you get everything needed for one camera run in a single purchase\u003c\/li\u003e\n\u003cli\u003eZero power draw keeps installation simple — no power supply planning required\u003c\/li\u003e\n\u003cli\u003eSmall 25 g form factor fits discreetly at camera or recorder termination points\u003c\/li\u003e\n\u003cli\u003eExtends monochrome signals up to 600 m, useful for long perimeter runs\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Fracarro","offers":[{"title":"Default Title","offer_id":56563568542078,"sku":"Fracarro UTP-RXTX","price":32.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671335977342.webp?v=1779626959"},{"product_id":"other-pca-120","title":"PCA 120 Directional 5 GHz Telecom Antenna – 120 cm Dish, 32 dBi Gain \u0026 5100-6000 MHz","description":"\u003cp\u003eThe PCA 120 is a large-aperture directional antenna built for telecommunications applications. With a 120 cm dish diameter and 32 dBi of gain at 5 GHz, it is designed for long-range wireless links in the 5100–6000 MHz frequency band where high gain is essential to close the link budget.\u003c\/p\u003e\u003cp\u003eIts directional pattern concentrates transmitted and received signal energy toward a single target, minimising interference from off-axis sources and maximising effective range.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDirectional dish antenna for telecommunications applications\u003c\/li\u003e\n\u003cli\u003e120 cm dish diameter\u003c\/li\u003e\n\u003cli\u003e32 dBi gain at 5 GHz\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5100–6000 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e32 dBi gain enables long-range point-to-point links where antennas with lower gain would fail to close the link budget\u003c\/li\u003e\n\u003cli\u003e120 cm aperture captures significantly more signal energy than smaller dish sizes at the same frequency\u003c\/li\u003e\n\u003cli\u003eDirectional pattern reduces interference from off-axis transmitters, improving link stability\u003c\/li\u003e\n\u003cli\u003eLarge aperture narrows the beam, increasing frequency re-use potential in dense deployments\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Directional dish\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Diameter:\u003c\/strong\u003e 120 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain:\u003c\/strong\u003e 32 dBi (at 5 GHz)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5100–6000 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eHigh 32 dBi gain means this antenna handles link distances where smaller dishes cannot\u003c\/li\u003e\n\u003cli\u003eThe 5100–6000 MHz range covers common licensed and unlicensed 5 GHz wireless backhaul bands\u003c\/li\u003e\n\u003cli\u003eLarge dish format is a proven, low-complexity solution for fixed wireless telecommunications infrastructure\u003c\/li\u003e\n\u003cli\u003eSingle-purchase antenna solution for demanding long-range point-to-point deployments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Default Title","offer_id":56563580699006,"sku":"201122","price":103.58,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671338991998.webp?v=1779627004"},{"product_id":"other-pca-140","title":"PCA 140 Offset Parabolic Satellite Dish 190 cm – 45.9 dB Gain, Aluminium \u0026 150 km\/h Wind","description":"\u003cp\u003eThe PCA 140 is a large-aperture offset parabolic satellite dish designed for professional satellite reception applications. With a 190 cm aperture and 45.9 dB of dish gain, it captures weak satellite signals across the 10.700–12.750 GHz reception frequency range. The aluminium construction with polyester powder coat finish is rated for continuous outdoor use from −40 °C to +60 °C.\u003c\/p\u003e\u003cp\u003eThe dish supports a 40 mm LNB holder with an LNB feed ratio of 0.421, and the mount allows elevation adjustment from 18° to 70°. Survival wind rating of 150 km\/h ensures structural integrity in severe weather events.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOffset parabolic dish design for satellite reception\u003c\/li\u003e\n\u003cli\u003e190 cm aperture (both small-axis and long-axis diameter: 190 cm)\u003c\/li\u003e\n\u003cli\u003eDish gain: 45.9 dB\u003c\/li\u003e\n\u003cli\u003eReception frequency: 10.700–12.750 GHz\u003c\/li\u003e\n\u003cli\u003eLNB holder: 40 mm; LNB feed: 0.421\u003c\/li\u003e\n\u003cli\u003eElevation range: 18°–70°\u003c\/li\u003e\n\u003cli\u003eAluminium construction with polyester powder coat finish in light grey\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e45.9 dB gain captures very weak satellite signals, enabling reliable reception in locations with marginal signal levels\u003c\/li\u003e\n\u003cli\u003eLarge 190 cm aperture is suited to wide-beam or distant satellites that smaller dishes cannot lock onto\u003c\/li\u003e\n\u003cli\u003eElevation adjustment from 18° to 70° covers a wide arc of the visible satellite arc\u003c\/li\u003e\n\u003cli\u003eOperational wind rating of 90 km\/h and survival rating of 150 km\/h handle severe storm conditions without structural damage\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Offset parabolic\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSmall Axis Diameter:\u003c\/strong\u003e 190 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLong Axis Diameter:\u003c\/strong\u003e 190 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Holder:\u003c\/strong\u003e 40 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Feed:\u003c\/strong\u003e 0.421\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDish Gain:\u003c\/strong\u003e 45.9 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReception Frequency:\u003c\/strong\u003e 10.700–12.750 GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Aluminium\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Polyester powder coating\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eElevation:\u003c\/strong\u003e 18°–70°\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Wind:\u003c\/strong\u003e 90 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSurvival Wind:\u003c\/strong\u003e 150 km\/h\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperational Temperature:\u003c\/strong\u003e −40 °C to +60 °C\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAluminium frame is lighter than steel and does not rust, reducing long-term maintenance\u003c\/li\u003e\n\u003cli\u003ePolyester powder coat finish resists chipping and UV fading, keeping the dish looking clean\u003c\/li\u003e\n\u003cli\u003eWide elevation range of 18°–70° gives installers flexibility to aim across a broad satellite arc without changing the mount\u003c\/li\u003e\n\u003cli\u003e150 km\/h survival wind rating provides confidence in exposed rooftop or mast installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Default Title","offer_id":56563581059454,"sku":"PCA 140","price":126.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671339123070.webp?v=1779627009"}],"url":"https:\/\/lynk.gr\/en-nz\/collections\/tv-audio.oembed","provider":"Lynk.gr","version":"1.0","type":"link"}