{"title":"Lokmann","description":"\u003cp\u003eLokmann specialises in cabling, including RG6 coaxial cable, CCTV combo cable, Ethernet window cable, RF coaxial adapters and F connectors. Suited to satellite, TV and CCTV installations, the Lokmann range is available at Lynk.gr with delivery across Greece.\u003c\/p\u003e","products":[{"product_id":"lokmann-1951-b-c-rg6-135db-copper-black-100m-coaxial-cable-html","title":"Lokmann 1951-B-C RG6 Coaxial Cable – Pure Copper, 135 dB Shielding, 100 m Black Coil","description":"\u003cp\u003eThe Lokmann 1951-B-C is a high-quality RG6 coaxial cable with a pure copper inner conductor of 1.02 mm diameter and a five-layer shielding construction achieving a shielding factor above 135 dB. The outer jacket is 7.0 mm PVC with a tolerance of ±0.2 mm, and the cable is supplied in a convenient 100 m coil with metre-by-metre markings for accurate length cutting on site.\u003c\/p\u003e\u003cp\u003eThe cable is UV-resistant, water-resistant, temperature-resistant, and age-resistant, making it suitable for both indoor and outdoor installations. The minimum bending radius of 35 mm allows installation through tight cable runs. Certifications include CE, RoHS, and REACH.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive-fold shielding: 3 × AL foil layers + 2 × AL braid 64 layers\u003c\/li\u003e\n\u003cli\u003ePure copper inner conductor: 1.02 mm diameter\u003c\/li\u003e\n\u003cli\u003eFPE insulation: 4.6 mm diameter\u003c\/li\u003e\n\u003cli\u003eOuter jacket: 7.0 mm PVC ±0.2 mm\u003c\/li\u003e\n\u003cli\u003eShielding factor: \u0026gt;135 dB\u003c\/li\u003e\n\u003cli\u003eImpedance: 75 ohms\u003c\/li\u003e\n\u003cli\u003e100 m coil with metre markings\u003c\/li\u003e\n\u003cli\u003eBlack outer jacket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePure copper (not copper-clad steel) inner conductor delivers lower resistance and better signal transmission, particularly at higher frequencies\u003c\/li\u003e\n\u003cli\u003eFive-fold shielding above 135 dB provides strong rejection of external interference from cellular, LTE, and broadcast signals\u003c\/li\u003e\n\u003cli\u003eUV, water, temperature, and age resistance make the cable suitable for permanent outdoor runs without additional conduit\u003c\/li\u003e\n\u003cli\u003eMetre markings enable precise on-site measurement and cutting without a separate measuring tape\u003c\/li\u003e\n\u003cli\u003e35 mm minimum bending radius allows routing through standard cable conduits and wall ducts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Lokmann 1951-B-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e RG6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Conductor:\u003c\/strong\u003e Cu 1.02 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e FPE 4.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Layers:\u003c\/strong\u003e 5 (AL foil \/ AL braid 64 \/ AL foil \/ AL braid 64 \/ AL foil)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e PVC 7.0 mm ±0.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShortening Factor:\u003c\/strong\u003e 0.85 v\/c\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Rate:\u003c\/strong\u003e \u0026gt;135 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin. Bending Radius:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 100 MHz:\u003c\/strong\u003e 5.75 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 200 MHz:\u003c\/strong\u003e 7.06 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 300 MHz:\u003c\/strong\u003e 8.62 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 500 MHz:\u003c\/strong\u003e 12.05 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 800 MHz:\u003c\/strong\u003e 14.53 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1000 MHz:\u003c\/strong\u003e 18.48 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1350 MHz:\u003c\/strong\u003e 21.93 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1750 MHz:\u003c\/strong\u003e 25.78 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 2050 MHz:\u003c\/strong\u003e 27.40 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 100 m coil format minimises joins on long cable runs, preserving signal quality from source to receiver\u003c\/li\u003e\n\u003cli\u003eMetre markings are printed on the jacket, eliminating the need for a separate measuring tool on the job\u003c\/li\u003e\n\u003cli\u003ePure copper conductor maintains low contact resistance at F-connector crimps compared to CCS alternatives\u003c\/li\u003e\n\u003cli\u003eCE, RoHS, and REACH certifications confirm compliance with European regulatory requirements\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56564387381630,"sku":"216247","price":67.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671604937086.webp?v=1779614993"},{"product_id":"lokmann-1951-rg6-135dbs-copper-white-100m-coaxial-cable-html","title":"Lokmann 1951 RG6 Coaxial Cable – CCS Conductor, 135 dB Shielding, 100 m White Coil","description":"\u003cp\u003eThe Lokmann 1951 is a high-quality RG6 coaxial cable with a copper clad steel (CCS) inner conductor of 1.02 mm diameter and a five-layer shielding construction achieving a shielding factor above 135 dB. The outer jacket is 7.0 mm PVC with a tolerance of ±0.2 mm, and the cable is supplied in a convenient 100 m coil with metre-by-metre markings for accurate length cutting on site.\u003c\/p\u003e\u003cp\u003eThe cable is UV-resistant, water-resistant, temperature-resistant, and age-resistant, suitable for both indoor and outdoor installations. The minimum bending radius of 35 mm allows routing through standard cable conduits. Certifications include CE, RoHS, and REACH.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive-fold shielding: 3 × ALU foil layers + 2 × ALU braid 64 layers\u003c\/li\u003e\n\u003cli\u003eCopper clad steel (CCS) inner conductor: 1.02 mm diameter\u003c\/li\u003e\n\u003cli\u003eFPE insulation: 4.6 mm diameter\u003c\/li\u003e\n\u003cli\u003eOuter jacket: 7.0 mm PVC ±0.2 mm\u003c\/li\u003e\n\u003cli\u003eShielding factor: \u0026gt;135 dB\u003c\/li\u003e\n\u003cli\u003eImpedance: 75 ohms\u003c\/li\u003e\n\u003cli\u003e100 m coil with metre markings\u003c\/li\u003e\n\u003cli\u003eWhite outer jacket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive-fold shielding above 135 dB provides strong rejection of external interference from cellular, LTE, and broadcast signals\u003c\/li\u003e\n\u003cli\u003eCCS inner conductor combines the conductivity of copper with the mechanical strength of steel, reducing stretch and breakage during installation\u003c\/li\u003e\n\u003cli\u003eUV, water, temperature, and age resistance make the cable suitable for permanent outdoor runs without additional conduit\u003c\/li\u003e\n\u003cli\u003eMetre markings enable precise on-site measurement and cutting without a separate measuring tape\u003c\/li\u003e\n\u003cli\u003e35 mm minimum bending radius allows routing through standard cable conduits and wall ducts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Lokmann 1951\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e RG6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Conductor:\u003c\/strong\u003e CCS 1.02 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e FPE 4.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Layers:\u003c\/strong\u003e 5 (ALU foil \/ ALU braid 64 \/ ALU foil \/ ALU braid 64 \/ ALU foil)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e PVC 7.0 mm ±0.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShortening Factor:\u003c\/strong\u003e 0.85 v\/c\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Rate:\u003c\/strong\u003e \u0026gt;135 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin. Bending Radius:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 100 MHz:\u003c\/strong\u003e 5.90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 200 MHz:\u003c\/strong\u003e 7.20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 300 MHz:\u003c\/strong\u003e 8.80 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 500 MHz:\u003c\/strong\u003e 12.30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 800 MHz:\u003c\/strong\u003e 14.90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1000 MHz:\u003c\/strong\u003e 18.80 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1350 MHz:\u003c\/strong\u003e 22.60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1750 MHz:\u003c\/strong\u003e 26.20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 2050 MHz:\u003c\/strong\u003e 28.80 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 100 m coil format minimises joins on long cable runs, preserving signal integrity from source to receiver\u003c\/li\u003e\n\u003cli\u003eWhite jacket blends with white wall surfaces and cable trays, reducing the visual impact of exposed cable runs indoors\u003c\/li\u003e\n\u003cli\u003eMetre markings printed on the jacket eliminate the need for a separate measuring tool on site\u003c\/li\u003e\n\u003cli\u003eCE, RoHS, and REACH certifications confirm compliance with European regulatory requirements\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56564388495742,"sku":"216245","price":42.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671605002622.webp?v=1779614998"},{"product_id":"lokmann-1951-b-rg6-135dbs-copper-black-100m-coaxial-cable-html","title":"Lokmann 1951-B RG6 Coaxial Cable – CCS Conductor, 135 dB Shielding, 100 m Black Coil","description":"\u003cp\u003eThe Lokmann 1951-B is a high-quality RG6 coaxial cable with a copper clad steel (CCS) inner conductor of 1.02 mm diameter and a five-layer shielding construction achieving a shielding factor above 135 dB. The outer jacket is 7.0 mm PVC with a tolerance of ±0.2 mm, and the cable is supplied in a convenient 100 m coil with metre-by-metre markings for accurate length cutting on site.\u003c\/p\u003e\u003cp\u003eThe cable is UV-resistant, water-resistant, temperature-resistant, and age-resistant, suitable for both indoor and outdoor installations. The minimum bending radius of 35 mm allows routing through standard cable conduits. Certifications include CE, RoHS, and REACH.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive-fold shielding: 3 × ALU foil layers + 2 × ALU braid 64 layers\u003c\/li\u003e\n\u003cli\u003eCopper clad steel (CCS) inner conductor: 1.02 mm diameter\u003c\/li\u003e\n\u003cli\u003eFPE insulation: 4.6 mm diameter\u003c\/li\u003e\n\u003cli\u003eOuter jacket: 7.0 mm PVC ±0.2 mm\u003c\/li\u003e\n\u003cli\u003eShielding factor: \u0026gt;135 dB\u003c\/li\u003e\n\u003cli\u003eImpedance: 75 ohms\u003c\/li\u003e\n\u003cli\u003e100 m coil with metre markings\u003c\/li\u003e\n\u003cli\u003eBlack outer jacket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive-fold shielding above 135 dB provides strong rejection of external interference from cellular, LTE, and broadcast signals\u003c\/li\u003e\n\u003cli\u003eCCS inner conductor combines the conductivity of copper with the mechanical strength of steel, reducing stretch and breakage during installation\u003c\/li\u003e\n\u003cli\u003eUV, water, temperature, and age resistance make the cable suitable for permanent outdoor runs without additional conduit\u003c\/li\u003e\n\u003cli\u003eMetre markings enable precise on-site measurement and cutting without a separate measuring tape\u003c\/li\u003e\n\u003cli\u003e35 mm minimum bending radius allows routing through standard cable conduits and wall ducts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Lokmann 1951-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Type:\u003c\/strong\u003e RG6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColor:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLength:\u003c\/strong\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Conductor:\u003c\/strong\u003e CCS 1.02 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e FPE 4.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Layers:\u003c\/strong\u003e 5 (ALU foil \/ ALU braid 64 \/ ALU foil \/ ALU braid 64 \/ ALU foil)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e PVC 7.0 mm ±0.2 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShortening Factor:\u003c\/strong\u003e 0.85 v\/c\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Rate:\u003c\/strong\u003e \u0026gt;135 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin. Bending Radius:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 100 MHz:\u003c\/strong\u003e 5.90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 200 MHz:\u003c\/strong\u003e 7.20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 300 MHz:\u003c\/strong\u003e 8.80 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 500 MHz:\u003c\/strong\u003e 12.30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 800 MHz:\u003c\/strong\u003e 14.90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1000 MHz:\u003c\/strong\u003e 18.80 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1350 MHz:\u003c\/strong\u003e 22.60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1750 MHz:\u003c\/strong\u003e 26.20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 2050 MHz:\u003c\/strong\u003e 28.80 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 100 m coil format minimises joins on long cable runs, preserving signal integrity from source to receiver\u003c\/li\u003e\n\u003cli\u003eBlack jacket suits outdoor and concealed indoor installations where a neutral colour is preferred\u003c\/li\u003e\n\u003cli\u003eMetre markings printed on the jacket eliminate the need for a separate measuring tool on site\u003c\/li\u003e\n\u003cli\u003eCE, RoHS, and REACH certifications confirm compliance with European regulatory requirements\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56564388856190,"sku":"216246","price":42.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671605166462.webp?v=1779615002"},{"product_id":"lokmann-f03-70-f-connector-7mm-with-o-ring-html","title":"Lokmann F03-70 F-Connector 7 mm – Coaxial Plug with O-Ring Seal, 10-Pack","description":"\u003cp\u003e\u003cspan style=\"font-size: 25px;\"\u003eLokmann\u003c\/span\u003e\u003cspan style=\"font-size: 25px;\"\u003e \u003c\/span\u003e\u003cspan style=\"font-size: 25px;\"\u003eF03-70\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003eF Connector 7mm with O-ring 10 pcs\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\n\u003cp\u003eThe Lokmann F03-70 is a F-connector for 7 mm diameter cable with one O-ring 10 pcs.\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv\u003e\u003cspan style=\"font-family: Helvetica, Arial, sans-serif; line-height: 20px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\n\u003ch3\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/h3\u003e\n\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56564389249406,"sku":"219181","price":1.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671605297534.webp?v=1779615007"},{"product_id":"lokmann-f03-70-g-f-connector-7mm-with-o-ring-gold-html","title":"Lokmann F03-70G F-Connector 7 mm Gold – Coaxial Plug with O-Ring, 10-Pack","description":"\u003cdiv\u003e\n\u003cp\u003eThe Lokmann F03-70G F-type connector is designed for 7 mm diameter coaxial cable. It comes as a 10-piece set in a gold finish and includes an O-ring to aid a secure seal at termination points.\u003c\/p\u003e\n\u003cp\u003eThis connector is intended for professional installers and capable DIY enthusiasts who need reliable terminations for 7 mm coax in RF and video installations. It provides a consistent fit and straightforward use in standard F-type applications.\u003c\/p\u003e \u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e \u003cli\u003eF-type connector designed for 7 mm diameter coaxial cable\u003c\/li\u003e \u003cli\u003eO-ring included to aid sealing\u003c\/li\u003e \u003cli\u003eGold finish for durability and easy identification\u003c\/li\u003e \u003cli\u003ePack of 10 connectors for multiple terminations\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e \u003cli\u003eDelivers reliable, repeatable terminations for 7 mm coax cables\u003c\/li\u003e \u003cli\u003eO-ring helps maintain a tight fit and supports signal integrity\u003c\/li\u003e \u003cli\u003eGold finish offers corrosion resistance and enhances visibility during installs\u003c\/li\u003e \u003cli\u003e10-piece pack reduces downtime and the need for frequent reorders\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e \u003cli\u003eModel number: F03-70G\u003c\/li\u003e \u003cli\u003eCable diameter compatibility: 7 mm\u003c\/li\u003e \u003cli\u003eO-ring: included\u003c\/li\u003e \u003cli\u003eFinish: gold\u003c\/li\u003e \u003cli\u003ePackage quantity: 10 pieces\u003c\/li\u003e \u003cli\u003eType: F-type connector\u003c\/li\u003e \u003cli\u003eBrand: Lokmann\u003c\/li\u003e \u003cli\u003eCompatibility: standard F-type terminations for 7 mm coax\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch4\u003eWhy You’ll Love It\u003c\/h4\u003e\n\u003cul\u003e \u003cli\u003eIdeal for hands-on RF and video installations requiring dependable 7 mm coax terminations\u003c\/li\u003e \u003cli\u003eCompact 10-piece set offers immediate project readiness and long-term supply\u003c\/li\u003e \u003cli\u003eGold finish provides durable appearance and easy component identification\u003c\/li\u003e \u003cli\u003eBacked by Lokmann's focus on practical, durable connector solutions\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56564393247102,"sku":"219182","price":1.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671605363070.webp?v=1779615011"},{"product_id":"f04-70-f-compression-connector-7mm-html","title":"Lokmann F04-70 Compression F-Connector 7 mm – Coaxial Plug, 10-Pack","description":"\u003cp\u003e\u003cspan style=\"font-size: 25px;\"\u003eF04-70\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eF Compression Connector 7mm 10 pcs \u003c\/h3\u003e\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\u003cp\u003eThe F04-70 is a F Compression Connector for 7 mm diameter cable 10 pcs.\u003cbr\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cspan style=\"font-family: Helvetica, Arial, sans-serif; line-height: 20px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\u003ch3\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/h3\u003e\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56564393574782,"sku":"219180","price":5.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671605494142.webp?v=1779615015"},{"product_id":"lokmann-1951-c-rg6-135db-copper-white-100m-coaxial-cable-html","title":"Lokmann 1951-C RG6 Coaxial Cable 100 m – Copper 1.02 mm, 5-Fold Shield 135 dB \u0026 75 Ω","description":"\u003cp\u003eThe Lokmann 1951-C is a high-grade RG6 coaxial cable supplied in a 100m coil with metre markings for precise cutting on site. Its 1.02mm solid copper inner conductor and five-layer aluminium shielding deliver a shielding factor above 135dB, making it well suited for demanding antenna and satellite distribution networks.\u003c\/p\u003e\u003cp\u003eThe 4.6mm FPE dielectric, 7.0mm PVC outer jacket, and UV, water, and age resistance make the cable durable in both indoor runs and externally routed installations. CE, RoHS, and REACH certification confirms compliance with European safety and environmental standards.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive-fold shielding: alternating aluminium foil and braid layers (AL foil \/ AL braid 64 \/ AL foil \/ AL braid 64 \/ AL foil)\u003c\/li\u003e\n\u003cli\u003eCopper inner conductor: 1.02mm diameter\u003c\/li\u003e\n\u003cli\u003eShielding factor: greater than 135dB\u003c\/li\u003e\n\u003cli\u003e75Ω impedance with 0.85 v\/c velocity factor\u003c\/li\u003e\n\u003cli\u003eOuter diameter 7.0mm (±0.2mm) PVC jacket\u003c\/li\u003e\n\u003cli\u003eMetre marking printed on the outer jacket\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive-layer shielding above 135dB blocks interference from LTE, 4G, and other high-frequency sources\u003c\/li\u003e\n\u003cli\u003eSolid copper conductor maintains consistent signal quality over the 100m length\u003c\/li\u003e\n\u003cli\u003eUV, water, and temperature resistance protects externally routed cable from weathering\u003c\/li\u003e\n\u003cli\u003eMinimum bending radius of 35mm allows routing through tight conduit runs and junction boxes\u003c\/li\u003e\n\u003cli\u003eCE, RoHS, and REACH certification plus flame-retardant grade confirm safety compliance\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 1951-C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 100m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Conductor:\u003c\/strong\u003e Copper, 1.02mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e 4.6mm FPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding (layers 1, 3, 5):\u003c\/strong\u003e Aluminium foil\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding (layers 2, 4):\u003c\/strong\u003e Aluminium braid 64\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e 7.0mm PVC ±0.2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75Ω\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Factor:\u003c\/strong\u003e \u0026gt;135dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVelocity Factor:\u003c\/strong\u003e 0.85 v\/c\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin. Bending Radius:\u003c\/strong\u003e 35mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH, flame-retardant grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 100MHz:\u003c\/strong\u003e 5.75dB\/100m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 200MHz:\u003c\/strong\u003e 7.06dB\/100m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 300MHz:\u003c\/strong\u003e 8.62dB\/100m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 500MHz:\u003c\/strong\u003e 12.05dB\/100m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 800MHz:\u003c\/strong\u003e 14.53dB\/100m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1000MHz:\u003c\/strong\u003e 18.48dB\/100m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1350MHz:\u003c\/strong\u003e 21.93dB\/100m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1750MHz:\u003c\/strong\u003e 25.78dB\/100m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 2050MHz:\u003c\/strong\u003e 27.40dB\/100m\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e100m coil with printed metre markings cuts waste and speeds installation\u003c\/li\u003e\n\u003cli\u003eGreater than 135dB shielding protects against high-frequency interference without additional screening\u003c\/li\u003e\n\u003cli\u003eWhite PVC jacket blends neatly with interior walls and cable management channels\u003c\/li\u003e\n\u003cli\u003ePackage includes 1× Lokmann 1951-C RG6 135dB copper coaxial cable, 100m\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56577272906110,"sku":"216259","price":67.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674561954174.webp?v=1779615142"},{"product_id":"lokmann-1951-5-rg6-135dbs-white-500m-coaxial-cable-html","title":"Lokmann 1951-5 RG6 Coaxial Cable 500 m White – 5-Fold Shielded \u003e135 dB, 75 Ω \u0026 CCS Core","description":"\u003cp\u003eThe Lokmann 1951-5 is a high-grade RG6 coaxial cable with a 7.0 mm outer diameter, wound on a 500 m spool. Its five-layer shielding structure — alternating ALU foil and ALU braid 64 layers — achieves a shielding factor exceeding 135 dB, making it suited to demanding terrestrial and satellite distribution systems.\u003c\/p\u003e\u003cp\u003eThe inner conductor is copper clad steel (CCS) at 1.02 mm diameter, insulated with 4.6 mm FPE dielectric. The outer PVC jacket carries metre markings and tolerates UV exposure, moisture, temperature variation, and ageing without degradation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive-fold shielding: 3× ALU foil + 2× ALU braid 64 for \u0026gt;135 dB shielding rate\u003c\/li\u003e\n\u003cli\u003eInner conductor: CCS 1.02 mm diameter\u003c\/li\u003e\n\u003cli\u003eDielectric: 4.6 mm FPE\u003c\/li\u003e\n\u003cli\u003eOuter jacket: 7.0 mm PVC (±0.2 mm), with metre markings\u003c\/li\u003e\n\u003cli\u003eSupplied as a 500 m spool\u003c\/li\u003e\n\u003cli\u003eImpedance: 75 ohms\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eShielding factor \u0026gt;135 dB minimises signal interference in densely installed environments\u003c\/li\u003e\n\u003cli\u003eCCS inner conductor balances conductivity and mechanical strength for long runs\u003c\/li\u003e\n\u003cli\u003eMetre markings allow precise cutting without measuring tools\u003c\/li\u003e\n\u003cli\u003eUV, water, temperature, and age resistance suitable for indoor and outdoor routing\u003c\/li\u003e\n\u003cli\u003eMinimum bending radius of 35 mm allows installation through tight conduit runs\u003c\/li\u003e\n\u003cli\u003eCE, RoHS, and REACH certified for compliance in European installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Lokmann 1951-5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 500 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 7.0 mm (PVC ±0.2 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Conductor:\u003c\/strong\u003e CCS 1.02 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDielectric:\u003c\/strong\u003e 4.6 mm FPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e 5-fold (ALU foil \/ ALU braid 64 \/ ALU foil \/ ALU braid 64 \/ ALU foil)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Rate:\u003c\/strong\u003e \u0026gt;135 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShortening Factor:\u003c\/strong\u003e 0.85 v\/c\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin. Bending Radius:\u003c\/strong\u003e 35 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH, flame-retardant grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 100 MHz:\u003c\/strong\u003e 5.90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 200 MHz:\u003c\/strong\u003e 7.20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 300 MHz:\u003c\/strong\u003e 8.80 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 500 MHz:\u003c\/strong\u003e 12.30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 800 MHz:\u003c\/strong\u003e 14.90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1000 MHz:\u003c\/strong\u003e 18.80 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1350 MHz:\u003c\/strong\u003e 22.60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1750 MHz:\u003c\/strong\u003e 26.20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 2050 MHz:\u003c\/strong\u003e 28.80 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e500 m spool covers large residential or commercial distribution projects from a single roll\u003c\/li\u003e\n\u003cli\u003eFive-layer shield construction reduces the need for additional signal amplification\u003c\/li\u003e\n\u003cli\u003eMetre markings on the jacket speed up installation and reduce measurement errors\u003c\/li\u003e\n\u003cli\u003ePackage includes: 1× Lokmann 1951-5 RG6 135dB White 500 m coaxial cable spool\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56577543700862,"sku":"216260","price":200.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674637910398.webp?v=1779631563"},{"product_id":"lokmann-1400-rg-6-100db-white-100m-coaxial-cable-quatro-copper-clad-steel-html","title":"Lokmann 1400 RG-6 Quatro Coaxial Cable 100 m White – 4× CCS 1.02 mm, \u003e100 dB \u0026 75 Ω","description":"\u003cp\u003eThe Lokmann 1400 is a Quatro RG-6 coaxial cable containing four independent inner conductors (4× CCS 1.02 mm) within a single 18 mm PVC outer jacket. The two-fold shielding — ALU foil plus ALU braid 64 — provides a shielding rate exceeding 100 dB, making it suited to multi-output satellite and terrestrial distribution runs where four signals must be routed in a single cable.\u003c\/p\u003e\u003cp\u003eEach conductor is insulated with 4.8 mm FPE dielectric, and the outer jacket incorporates metre markings. The cable is certified CE, RoHS, and REACH and is resistant to UV radiation, water, temperature variation, and ageing.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eQuatro construction: 4× CCS 1.02 mm inner conductors in one cable\u003c\/li\u003e\n\u003cli\u003eTwo-fold shielding: ALU foil + ALU braid 64 for \u0026gt;100 dB shielding rate\u003c\/li\u003e\n\u003cli\u003eDielectric: 4.8 mm FPE per conductor\u003c\/li\u003e\n\u003cli\u003eOuter jacket: 18 mm PVC (4× 6.9 mm Ø sub-cables)\u003c\/li\u003e\n\u003cli\u003eSupplied as a 100 m spool with metre markings\u003c\/li\u003e\n\u003cli\u003eImpedance: 75 ohms per conductor\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFour conductors in one jacket simplifies multi-room or multi-output satellite installations\u003c\/li\u003e\n\u003cli\u003eShielding rate \u0026gt;100 dB reduces cross-talk between conductors and external interference\u003c\/li\u003e\n\u003cli\u003eCCS inner conductors balance tensile strength and signal conductivity for long pulls\u003c\/li\u003e\n\u003cli\u003eMetre markings on the outer jacket allow precise cutting without separate measuring tools\u003c\/li\u003e\n\u003cli\u003eUV, water, temperature, and age resistance allows installation in exposed locations\u003c\/li\u003e\n\u003cli\u003eCE, RoHS, and REACH certification confirms compliance with European standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Lokmann 1400\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 18 mm (1.8 cm) PVC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSub-cable Diameter:\u003c\/strong\u003e 4× 6.9 mm Ø\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Conductor:\u003c\/strong\u003e 4× CCS 1.02 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDielectric:\u003c\/strong\u003e 4.8 mm FPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e 2-fold (ALU foil + ALU braid 64)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Rate:\u003c\/strong\u003e \u0026gt;100 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShortening Factor:\u003c\/strong\u003e 0.85 v\/c\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH, flame-retardant grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 100 MHz:\u003c\/strong\u003e 6.20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 200 MHz:\u003c\/strong\u003e 8.80 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 300 MHz:\u003c\/strong\u003e 10.10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 500 MHz:\u003c\/strong\u003e 13.20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 800 MHz:\u003c\/strong\u003e 17.20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1000 MHz:\u003c\/strong\u003e 19.90 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1350 MHz:\u003c\/strong\u003e 24.70 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1750 MHz:\u003c\/strong\u003e 28.60 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 2050 MHz:\u003c\/strong\u003e 31.30 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle outer jacket for four signal paths reduces installation time and conduit fill\u003c\/li\u003e\n\u003cli\u003e100 m spool sized for single-property multi-room satellite or cable TV projects\u003c\/li\u003e\n\u003cli\u003eMetre markings speed up cable management and reduce measurement errors on site\u003c\/li\u003e\n\u003cli\u003ePackage includes: 1× Lokmann 1400 RG-6 100dB White 100 m Quatro coaxial cable spool\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56577544094078,"sku":"216261","price":209.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674638270846.webp?v=1779631568"},{"product_id":"lokmann-1382-rg59-power-cable-100m-copper-html","title":"Lokmann 1382 RG59 + Power Combo Cable 100 m – Solid Copper Core, Cu Braid Shield \u0026 75 Ω","description":"\u003cp\u003eThe Lokmann 1382 combines an RG59 coaxial cable and a power cable in a single 2×6.1 mm dual-jacket assembly on a 100 m spool. The RG59 coaxial section features a 0.6 mm copper inner conductor insulated with 3.7 mm PE dielectric and shielded with a copper braid. This makes it well suited to CCTV and surveillance camera runs where a single cable must deliver both video signal and DC power.\u003c\/p\u003e\u003cp\u003eThe outer PVC jacket carries metre markings for accurate cutting on site. The cable is resistant to UV radiation, water, temperature variation, and ageing, and is certified CE, RoHS, and REACH.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDual construction: RG59 coaxial + power cable in one 2×6.1 mm assembly\u003c\/li\u003e\n\u003cli\u003eRG59 inner conductor: solid copper, 0.6 mm diameter\u003c\/li\u003e\n\u003cli\u003eShielding: copper (CU) braid\u003c\/li\u003e\n\u003cli\u003eDielectric: 3.7 mm PE\u003c\/li\u003e\n\u003cli\u003eOuter jacket: 2×6.1 mm PVC (±0.2 mm) with metre markings\u003c\/li\u003e\n\u003cli\u003eSupplied as a 100 m spool\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle cable for both video and power reduces installation time and material for CCTV runs\u003c\/li\u003e\n\u003cli\u003eSolid copper inner conductor provides better conductivity than CCS alternatives for the RG59 signal path\u003c\/li\u003e\n\u003cli\u003eCopper braid shielding offers effective protection against electromagnetic interference\u003c\/li\u003e\n\u003cli\u003eMetre markings allow precise cutting without measuring tools\u003c\/li\u003e\n\u003cli\u003eUV, water, temperature, and age resistance permits both indoor and outdoor routing\u003c\/li\u003e\n\u003cli\u003eCE, RoHS, and REACH certified for compliance in European installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Lokmann 1382\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 100 m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Diameter:\u003c\/strong\u003e 2×6.1 mm PVC (±0.2 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Conductor (RG59):\u003c\/strong\u003e Copper, 0.6 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDielectric:\u003c\/strong\u003e 3.7 mm PE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e Copper (CU) braid\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShortening Factor:\u003c\/strong\u003e 0.85 v\/c\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH, flame-retardant grade\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 1 MHz:\u003c\/strong\u003e 1.30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 10 MHz:\u003c\/strong\u003e 3.50 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 100 MHz:\u003c\/strong\u003e 10.05 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 200 MHz:\u003c\/strong\u003e 15.30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 350 MHz:\u003c\/strong\u003e 19.80 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 450 MHz:\u003c\/strong\u003e 23.20 dB\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne cable replaces two separate runs — less conduit fill, faster installation, and tidier cable management\u003c\/li\u003e\n\u003cli\u003e100 m spool sized for single-building or multi-camera CCTV installations\u003c\/li\u003e\n\u003cli\u003eMetre markings speed up cutting and reduce waste on site\u003c\/li\u003e\n\u003cli\u003ePackage includes: 1× Lokmann 1382 RG59 \u0026amp; Power Cable 100 m, Copper\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56577553957246,"sku":"216262","price":99.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674643644798.webp?v=1779615291"},{"product_id":"lokmann-fd-tr-30g-window-cable-30cm-copper-html","title":"Lokmann FD-TR 30G Flat Coax Window Cable 30 cm – Copper, F-F Female \u0026 No-Drill Routing","description":"\u003cp\u003eThe Lokmann FD-TR 30G is a flat window cable that routes coaxial signal through a closed window or door frame without drilling. It uses copper conductors for optimal signal conductivity and terminates in female F-connectors at both ends.\u003c\/p\u003e\u003cp\u003eAt 30 cm it provides just enough length for a clean window run, and the flat profile minimises compression on the frame seal. It is suited to extension or replacement of existing window cable installations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFemale F-F connector type at both ends for direct in-line connection\u003c\/li\u003e\n\u003cli\u003e30 cm length — optimised for single-window routing\u003c\/li\u003e\n\u003cli\u003eCopper conductor for optimal signal conductivity\u003c\/li\u003e\n\u003cli\u003eFlat profile designed to pass through closed window or door frames\u003c\/li\u003e\n\u003cli\u003eEasy to install and connect without specialist tools\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCopper construction maintains signal integrity across the window junction\u003c\/li\u003e\n\u003cli\u003eFemale F-F termination allows direct connection between two male F-plug cables\u003c\/li\u003e\n\u003cli\u003e30 cm length avoids excess slack inside the room\u003c\/li\u003e\n\u003cli\u003eFlat form factor does not damage window seals when frame is closed\u003c\/li\u003e\n\u003cli\u003eDrop-in replacement for worn or damaged window cables in existing installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e FD-TR 30G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lokmann\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 30 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Material:\u003c\/strong\u003e Copper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e Female F-F (Window Cable)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo drilling required — routes signal through a closed window frame\u003c\/li\u003e\n\u003cli\u003eCopper build gives confidence in long-term signal stability\u003c\/li\u003e\n\u003cli\u003eStandard F-F format is compatible with all F-connector satellite and antenna cables\u003c\/li\u003e\n\u003cli\u003ePackage includes 1× Lokmann FD-TR 30G window cable 30 cm copper\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56578413494654,"sku":"216276","price":3.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675060322686.webp?v=1779634425"},{"product_id":"lokmann-fd-rj45-window-cable-30cm-rj45-lan-html","title":"Lokmann FD-RJ45 Flat Window LAN Cable 30 cm – RJ45-to-RJ45 \u0026 Copper Conductors","description":"\u003cp\u003eThe Lokmann FD-RJ45 is a 30cm cable with RJ45 connectors at each end, specifically designed for routing network connections under window frames or door seals. Its flat, low-profile construction allows it to pass through the narrow gap of a closed window without damaging the frame or requiring any drilling.\u003c\/p\u003e\u003cp\u003eIt functions as both an extension cable and a window feed-through, allowing a standard Ethernet cable to continue from one side of a wall opening to the other while keeping the window closed and sealed.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCable length: 30cm\u003c\/li\u003e\n\u003cli\u003eConnector type: RJ45 at both ends\u003c\/li\u003e\n\u003cli\u003ePurpose: LAN \/ network window pass-through connections\u003c\/li\u003e\n\u003cli\u003eConductor material: high-quality copper for optimal signal transmission\u003c\/li\u003e\n\u003cli\u003eEasy to install — plug and play, no tools required\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFlat profile passes through window gaps without drilling or permanent modification\u003c\/li\u003e\n\u003cli\u003e30cm length provides enough slack for alignment without excess cable\u003c\/li\u003e\n\u003cli\u003eCopper conductors maintain signal integrity for stable data transmission\u003c\/li\u003e\n\u003cli\u003eRJ45 connectors at both ends allow direct in-line use or extension\u003c\/li\u003e\n\u003cli\u003eSuitable for extending or replacing existing LAN window cables\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e FD-RJ45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Lokmann\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 30cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e RJ45\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUse:\u003c\/strong\u003e LAN \/ network window connections\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConductor Material:\u003c\/strong\u003e High-quality copper\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo drilling required — slides under any standard window frame\u003c\/li\u003e\n\u003cli\u003ePlug and play connection restores network access between rooms immediately\u003c\/li\u003e\n\u003cli\u003eCompatible with standard Cat5e \/ Cat6 patch cables at both ends\u003c\/li\u003e\n\u003cli\u003ePackage includes 1× Lokmann FD-RJ45 30cm LAN Window Cable\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56578897740158,"sku":"216293","price":5.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675167965566.webp?v=1779616633"},{"product_id":"lokmann-f07-70s-adapter-f-male-rf-male-html","title":"Lokmann F07-70S F-Male to RF-Male Coaxial Adapter – Metal Body, 10-Pack","description":"\u003cdiv\u003eLokmann F07-70S is a F Male to RF Male adapter set designed for RF coaxial connections. This product is offered as a 10-piece pack, making it suitable for technicians and hobbyists who regularly work with F-type and RF interfaces. The primary purpose is to provide a reliable, easy-to-use conversion between F Male and RF Male connectors in common field and bench setups. It is well suited for quick interconnects in everyday RF tasks, such as antenna installations, test rigs, or temporary configurations where changing cables or equipment would be disruptive. The combination of a durable metal body and a knurled grip supports comfortable, repeated use in busy work environments.\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003ePack contains 10 adapters\u003c\/li\u003e\n\u003cli\u003eF Male to RF Male adapter configuration\u003c\/li\u003e\n\u003cli\u003eMetal construction for durability\u003c\/li\u003e\n\u003cli\u003eKnurled grip aids hand tightening\u003c\/li\u003e\n\u003cli\u003eThreaded coupling provides secure connections\u003c\/li\u003e\n\u003cli\u003eCompact, portable design for tool kits\u003c\/li\u003e\n\u003cli\u003eLokmann F07-70S model\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnables quick adaptation between F-type and RF connectors without changing cables\u003c\/li\u003e\n\u003cli\u003eReduces downtime with a ready supply of spare adapters\u003c\/li\u003e\n\u003cli\u003eImproves handling and tightening comfort during field work\u003c\/li\u003e\n\u003cli\u003eDurable build withstands regular assembly and disassembly\u003c\/li\u003e\n\u003cli\u003eMaintains reliable connections in typical RF environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eModel: F07-70S\u003c\/li\u003e\n\u003cli\u003eDimensions: 10.0 x 10.0 mm (approx)\u003c\/li\u003e\n\u003cli\u003eMaterials: Metal\u003c\/li\u003e\n\u003cli\u003eCompatibility: F Male to RF Male connectors; standard RF coaxial systems\u003c\/li\u003e\n\u003cli\u003ePerformance \/ Type: Passive adapter\u003c\/li\u003e\n\u003cli\u003ePower requirements: None\u003c\/li\u003e\n\u003cli\u003eEAN: 4260188663688\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You’ll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReliable compatibility for common RF setups\u003c\/li\u003e\n\u003cli\u003eConvenient 10-piece pack provides ready replacements\u003c\/li\u003e\n\u003cli\u003eDurable metal body supports daily use\u003c\/li\u003e\n\u003cli\u003eSimple hand tightening with a knurled grip\u003c\/li\u003e\n\u003cli\u003eIdeal as a core part of a technician’s tools or spare parts kit\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56578930213246,"sku":"219234","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675173536126.webp?v=1779636242"},{"product_id":"lokmann-kf5-f-44-adapter-t-f-html","title":"Lokmann KF5-F-44 F-Type T-Splitter – 3-Way Female Coaxial Branch Connector, 10-Pack","description":"\u003cdiv\u003e\n\u003cp\u003eLokmann KF5-F-44 is a three‑way F‑type coaxial T connector that lets you branch one RF signal into two additional outputs. The 10‑piece kit is designed for TV antenna, RF distribution, and general coax wiring projects where a compact, reliable junction is needed. The three female ports and metal body provide a durable, quick‑connect solution for tight installation spaces.\u003c\/p\u003e\n\u003cp\u003eThis kit is suitable for both professionals and DIY enthusiasts who need a straightforward, scalable solution for distributing coax signals without introducing complexity. The standard F‑type threading ensures compatibility with common coax cables and fittings used in home entertainment and RF applications.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eThree-port F-type T configuration for coaxial RF\u003c\/li\u003e\n\u003cli\u003eAll ports are female F connectors\u003c\/li\u003e\n\u003cli\u003ePack of 10 pieces for replacements and multiple installations\u003c\/li\u003e\n\u003cli\u003eCompact metal body for durability in tight spaces\u003c\/li\u003e\n\u003cli\u003eStandard F-type threading for easy connections\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eEnables simple distribution of a single coax feed to multiple outlets for TVs and antennas\u003c\/li\u003e\n\u003cli\u003eSecure connections help maintain signal integrity during use\u003c\/li\u003e\n\u003cli\u003eKeeps spare adapters on hand for future projects or repairs\u003c\/li\u003e\n\u003cli\u003eCompact form factor reduces bulk in crowded or behind-wall installations\u003c\/li\u003e\n\u003cli\u003eCompatible with widely used F-type coax cables and fittings\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eModel: KF5-F-44\u003c\/li\u003e\n\u003cli\u003ePackage quantity: 10 pieces\u003c\/li\u003e\n\u003cli\u003eConnector configuration: F-type female to F-type female three-port T\u003c\/li\u003e\n\u003cli\u003eDimensions: approximately 10.0 mm length and 10.0 mm width\u003c\/li\u003e\n\u003cli\u003eMaterial: metal body (visual indication from build)\u003c\/li\u003e\n\u003cli\u003eCompatibility: standard F-type coax cables\u003c\/li\u003e\n\u003cli\u003eEAN: 4260188663558\u003c\/li\u003e\n\u003cli\u003eMPN: KF5-F-44\u003c\/li\u003e\n\u003cli\u003eBrand: Lokmann\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You’ll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReliable, space‑saving solution for RF and TV coax projects\u003c\/li\u003e\n\u003cli\u003eQuick, tool‑free connections suited for both professionals and hobbyists\u003c\/li\u003e\n\u003cli\u003eTen‑pack provides plentiful spares for ongoing installations\u003c\/li\u003e\n\u003cli\u003eDurable build supports repeated use in varying environments\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56578930278782,"sku":"219235","price":5.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675173568894.webp?v=1779616655"},{"product_id":"lokmann-kf5-f-52-quick-f-f-female-to-f-male-html","title":"Lokmann KF5-F-52 Quick-F Coaxial Adapter – F-Female to F-Male, Metal Body, 10-Pack","description":"\u003cdiv\u003eLokmann KF5-F-52 Quick F connectors come in a 10-piece kit designed for RF coaxial connections between F female and F male ports. This kit is useful for installers and hobbyists working on TV, satellite, or antenna cabling who need quick, reliable terminations. The metal connectors are built for durability and provide spare or replacement parts to reduce downtime on projects.\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eQuick F connector type KF5\u003c\/li\u003e\n\u003cli\u003eF female to F male configuration\u003c\/li\u003e\n\u003cli\u003e10 pieces included\u003c\/li\u003e\n\u003cli\u003eMetal construction for durability\u003c\/li\u003e\n\u003cli\u003eSuitable for RF coaxial connections\u003c\/li\u003e\n\u003cli\u003eCompact form factor for easy handling\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSpeeds up terminations, saving time on installations\u003c\/li\u003e\n\u003cli\u003eReduces downtime with multiple connectors in one kit\u003c\/li\u003e\n\u003cli\u003eDurable metal construction resists wear in field use\u003c\/li\u003e\n\u003cli\u003eProvides consistent, reliable signal connections\u003c\/li\u003e\n\u003cli\u003eEasy replacement parts for maintenance\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eModel number: KF5-F-52\u003c\/li\u003e\n\u003cli\u003eDimensions: 10.0 x 10.0\u003c\/li\u003e\n\u003cli\u003eMaterials: Metal\u003c\/li\u003e\n\u003cli\u003eContents: 10 pieces\u003c\/li\u003e\n\u003cli\u003eConnector type: Quick F\u003c\/li\u003e\n\u003cli\u003eGender: F female to F male\u003c\/li\u003e\n\u003cli\u003eEAN: 4260188665163\u003c\/li\u003e\n\u003cli\u003eMPN: KF5-F-52\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You’ll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eReliable, quick terminations for RF cabling in home and workshop setups\u003c\/li\u003e\n\u003cli\u003eConvenient ten-piece kit for projects, spares, and on-site replacements\u003c\/li\u003e\n\u003cli\u003eDurable metal construction designed to endure regular use and handling\u003c\/li\u003e\n\u003cli\u003eClear model identification with KF5-F-52 for compatibility and stocking\u003c\/li\u003e\n\u003cli\u003eBacked by Lokmann, a trusted name in RF connectors\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56578930377086,"sku":"219236","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675173667198.webp?v=1779616660"},{"product_id":"lokmann-kf5-f-57g-adapter-f-female-rf-female-html","title":"Lokmann KF5-F-57G Coaxial Adapter – F-Female to RF-Female, Metal Body, 10-Pack","description":"\u003cp\u003e\u003cspan style=\"font-size: 25px;\"\u003eLokmann KF5-F-57G\u003c\/span\u003e\u003cbr\u003e\u003c\/p\u003e\u003ch3\u003eAdapter F Female - RF Female 10 pcs\u003c\/h3\u003e\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e\u003cp\u003eLokmann KF5-F-57G is a connector F Female to RF Female 10 pcs\u003cbr\u003e\u003c\/p\u003e\u003cdiv\u003e\u003cspan style=\"font-family: Helvetica, Arial, sans-serif; line-height: 20px;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/div\u003e\u003ch3\u003e\u003cspan style=\"font-weight: bold;\"\u003e\u003cbr\u003e\u003c\/span\u003e\u003c\/h3\u003e\u003ch3\u003e\u003cbr\u003e\u003c\/h3\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56578930442622,"sku":"219237","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675173732734.webp?v=1779636246"},{"product_id":"lokmann-kf5-f55g-adapter-f-female-rf-male-html","title":"Lokmann KF5-F55G Coaxial Adapter F-Female to RF-Male – 10-Pack, Knurled \u0026 Tool-Free","description":"\u003cdiv\u003e\n\u003cp\u003eLokmann KF5-F55G is an adapter set that converts F Female connections to RF Male connectors, designed for RF coaxial cable work such as installations, testing, and field service. It provides a straightforward way to connect common RF interfaces without tools.\u003c\/p\u003e \u003cp\u003eThe set includes ten adapters, making it practical for spare parts in service carts and ongoing projects where multiple connections are needed.\u003c\/p\u003e \u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e \u003cli\u003eF Female to RF Male adapter configuration\u003c\/li\u003e \u003cli\u003eTen adapters per pack\u003c\/li\u003e \u003cli\u003eKnurled grip section for easy hand tightening\u003c\/li\u003e \u003cli\u003eCompact cylindrical form suitable for tight spaces\u003c\/li\u003e \u003cli\u003ePassive RF connector with standard mating interfaces\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e \u003cli\u003eSpeeds up setup and testing by enabling quick, tool-free connections\u003c\/li\u003e \u003cli\u003eProvides repeatable mating for reliable signal transmission\u003c\/li\u003e \u003cli\u003eEnsures you have spare adapters ready for ongoing RF work\u003c\/li\u003e \u003cli\u003eReduces downtime when changing between setups or devices\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e \u003cli\u003eModel number KF5-F-55G\u003c\/li\u003e \u003cli\u003eDimensions: 10.0 x 10.0\u003c\/li\u003e \u003cli\u003eEnd types: F Female to RF Male\u003c\/li\u003e \u003cli\u003ePack quantity: 10 pieces\u003c\/li\u003e \u003cli\u003eEAN: 4260188665187\u003c\/li\u003e \u003cli\u003eMPN: KF5-F-55G\u003c\/li\u003e \u003cli\u003eBrand: Lokmann\u003c\/li\u003e \u003cli\u003ePower requirement: None (passive connector)\u003c\/li\u003e\n\u003c\/ul\u003e \u003ch4\u003eWhy You’ll Love It\u003c\/h4\u003e\n\u003cul\u003e \u003cli\u003eGreat for everyday RF cabling tasks with a dedicated adapter kit\u003c\/li\u003e \u003cli\u003eSmall, portable design makes it easy to carry between sites\u003c\/li\u003e \u003cli\u003eValuable as a multi-pack for replacements and backup connections\u003c\/li\u003e \u003cli\u003eBacked by Lokmann’s specialization in RF connectors and adapters\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56578953937278,"sku":"219240","price":4.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675181465982.webp?v=1779636430"},{"product_id":"lokmann-1951-5-b-rg6-135dbs-black-500m-coaxial-cable-html","title":"Lokmann 1951-5-B RG6 Coaxial Cable 500 m Black – \u003e135 dB Shielding, CCS 1.02 mm \u0026 75 Ohm","description":"\u003cp\u003eThe Lokmann 1951-5-B is a high-quality RG6 coaxial cable supplied in a 500m reel. Its inner conductor is copper clad steel (CCS) with a diameter of 1.02mm, surrounded by five layers of shielding — alternating aluminium foil and 64-strand aluminium braid — that achieve a shielding rate of more than 135 dB. The outer jacket is 7.0mm PVC (±0.2mm).\u003c\/p\u003e\u003cp\u003eThe cable meets CE, RoHS, and REACH certifications and carries flammability-grade certification. It is UV-resistant, water-resistant, temperature-resistant, and age-resistant, with metre markings printed along the jacket for easy length measurement during installation.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFive-fold shielding: ALU foil \/ ALU braid 64 \/ ALU foil \/ ALU braid 64 \/ ALU foil\u003c\/li\u003e\n\u003cli\u003eShielding rate: \u0026gt;135 dB\u003c\/li\u003e\n\u003cli\u003eCCS inner conductor, diameter 1.02mm\u003c\/li\u003e\n\u003cli\u003e4.6mm FPE insulation\u003c\/li\u003e\n\u003cli\u003e7.0mm PVC outer jacket (±0.2mm)\u003c\/li\u003e\n\u003cli\u003e500m reel length with metre markings\u003c\/li\u003e\n\u003cli\u003eUV-resistant, water-resistant, temperature-resistant, and age-resistant\u003c\/li\u003e\n\u003cli\u003eMinimum bending radius: 35mm\u003c\/li\u003e\n\u003cli\u003eCertifications: CE, RoHS, REACH, flammability grade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\u0026gt;135 dB shielding suppresses interference from nearby electrical sources, preserving signal quality across the full cable length\u003c\/li\u003e\n\u003cli\u003eCCS inner conductor combines the conductivity of copper with the tensile strength of steel, reducing the risk of breakage during installation\u003c\/li\u003e\n\u003cli\u003eMetre markings along the jacket speed up measurement and reduce waste when cutting to length on-site\u003c\/li\u003e\n\u003cli\u003eUV and weather resistance enable outdoor aerial runs without degradation\u003c\/li\u003e\n\u003cli\u003eImpedance of 75 ohms and velocity factor of 0.85 v\/c are matched to standard satellite and terrestrial distribution systems\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e 1951-5-B\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e RG6 Coaxial Cable\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 500m\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInner Conductor:\u003c\/strong\u003e CCS 1.02mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsulation:\u003c\/strong\u003e 4.6mm FPE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding:\u003c\/strong\u003e 5× (ALU foil + ALU braid 64, alternating)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eShielding Rate:\u003c\/strong\u003e \u0026gt;135 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOuter Jacket:\u003c\/strong\u003e 7.0mm PVC ±0.2mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eImpedance:\u003c\/strong\u003e 75 ohms\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVelocity Factor:\u003c\/strong\u003e 0.85 v\/c\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMin. Bending Radius:\u003c\/strong\u003e 35mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation at 20°C:\u003c\/strong\u003e 100MHz 5.90 dB | 200MHz 7.20 dB | 300MHz 8.80 dB | 500MHz 12.30 dB | 800MHz 14.90 dB | 1000MHz 18.80 dB | 1350MHz 22.60 dB | 1750MHz 26.20 dB | 2050MHz 28.80 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUV Resistance:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWater Resistance:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCertifications:\u003c\/strong\u003e CE, RoHS, REACH, flammability grade\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e500m reel supplies a full installation job without mid-run joins that could degrade signal\u003c\/li\u003e\n\u003cli\u003ePrinted metre markings eliminate the need for a separate measuring tape when routing cable\u003c\/li\u003e\n\u003cli\u003eFive-fold shielding gives confidence in environments with high RF interference (near power lines or electrical panels)\u003c\/li\u003e\n\u003cli\u003ePackage includes 1× Lokmann 1951-5-B 500m RG6 coaxial cable reel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Lokmann","offers":[{"title":"Default Title","offer_id":56579138617726,"sku":"216310","price":200.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675225178494.webp?v=1779637473"}],"url":"https:\/\/lynk.gr\/en-gb\/collections\/lokmann.oembed","provider":"Lynk.gr","version":"1.0","type":"link"}