{"title":"Door \u0026 Window Sensors","description":"\u003cp\u003eBrowse our complete range of door \u0026amp; window sensors at Lynk.gr. Choose from wired and wireless door sensors, window sensors, glass break and vibration sensors sourced from leading brands, with fast delivery and certified quality.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFree shipping across Greece on orders over €80.\u003c\/strong\u003e\u003c\/p\u003e","products":[{"product_id":"ml-210e-wireless-magnetic-switch-html","title":"ML-210E Wireless Magnetic Contact 433 MHz – 150 m Range, Wired Input \u0026 Defendo Compatible","description":"\u003cp\u003eThe ML-210E is a mini-style wireless magnetic contact transmitter that monitors door and window status and sends an instant alarm to the connected control panel when the magnetic stripe and transmitter separate by more than 2.5cm. It operates at 433MHz and is compatible with all Defendo control panels, but does not work with older ML-7664 and ML-300 versions.\u003c\/p\u003e\u003cp\u003eThe detector can convert a wired contact signal to wireless, functioning as a transmitter for existing wired sensors. It automatically reports operating status to the control panel at 30 seconds, 2 minutes, and 6 minutes after first power-up or reset, then every two hours thereafter. A terminal for connecting an external wired contact is included.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWireless magnetic contact at 433MHz\u003c\/li\u003e\n\u003cli\u003eOpen-area wireless range: 150m (internal antenna)\u003c\/li\u003e\n\u003cli\u003eInstant alarm on door\/window open or close\u003c\/li\u003e\n\u003cli\u003eAlarm triggered when stripe and transmitter separate by 2.5cm\u003c\/li\u003e\n\u003cli\u003eExternal wired contact terminal included\u003c\/li\u003e\n\u003cli\u003eAutomatic status reporting: 30 seconds, 2 minutes, 6 minutes after reset; then every 2 hours\u003c\/li\u003e\n\u003cli\u003eTwo-way operation with all Defendo panels\u003c\/li\u003e\n\u003cli\u003ePowered by 1× CR123A lithium battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e150m open-area range ensures reliable signal reach from distant or shielded doors and windows to the control panel\u003c\/li\u003e\n\u003cli\u003eFully supervised design — automatic status reports every 2 hours confirm the sensor is operational without manual checks\u003c\/li\u003e\n\u003cli\u003eWired-contact terminal allows conversion of legacy hardwired sensors to wireless, reducing installation cost\u003c\/li\u003e\n\u003cli\u003eLow static current (\u0026lt;5μA) extends CR123A battery life to approximately 1 year before replacement is needed\u003c\/li\u003e\n\u003cli\u003eCompact 8×32×24mm body installs discreetly on door frames and window rebates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Frequency:\u003c\/strong\u003e 433MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWireless Range (open area):\u003c\/strong\u003e 150m (internal antenna)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Voltage:\u003c\/strong\u003e 3V lithium battery (CR123A)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery Life:\u003c\/strong\u003e 1 year\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCurrent:\u003c\/strong\u003e Static \u0026lt;5μA, Alarm \u0026lt;15mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Output:\u003c\/strong\u003e Alarm, tamper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIdentification Code:\u003c\/strong\u003e 28-digit ID, 8-digit\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAlarm Trigger Distance:\u003c\/strong\u003e 2.5cm separation between stripe and transmitter\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Temperature:\u003c\/strong\u003e -10°C to +50°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitter Dimensions:\u003c\/strong\u003e 8×32×24mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Stripe Dimensions:\u003c\/strong\u003e 74×20×12mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e433MHz frequency and 150m range give installation flexibility for large properties or thick-walled buildings\u003c\/li\u003e\n\u003cli\u003eAutomatic 2-hour heartbeat lets the control panel confirm the sensor is alive without user intervention\u003c\/li\u003e\n\u003cli\u003eCR123A battery is widely available and the 1-year expected life reduces maintenance visits\u003c\/li\u003e\n\u003cli\u003ePackage includes 1× ML-210E wireless magnetic contact and 1× Installation Instructions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Default Title","offer_id":56578866020734,"sku":"225007","price":11.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675163050366.webp?v=1779635999"},{"product_id":"other-ml-2012br-wired-magnetic-contact-brown","title":"ML-2012BR Wired Magnetic Contact Brown – 3 cm Gap, 3M Adhesive \u0026 Screw Mount","description":"\u003cp\u003eThe ML-2012BR is a wired magnetic contact in brown, designed for use with alarm systems that require detection on doors, windows, roller shutters, or aluminium frames. Its small size and dual-fixing method — 3M adhesive tape, screws, or both simultaneously — mean it can be mounted in nearly any position without structural modification.\u003c\/p\u003e\u003cp\u003eIt operates with a magnetic gap of up to 3 cm, giving flexibility in fitting on frames where the magnet and switch halves cannot be mounted perfectly flush.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWired magnetic contact for alarm system integration\u003c\/li\u003e\n\u003cli\u003eBrown colour — blends with brown door and window frames\u003c\/li\u003e\n\u003cli\u003eDual mounting: 3M adhesive tape, screws, or both at the same time\u003c\/li\u003e\n\u003cli\u003eMagnetic gap: 3 cm\u003c\/li\u003e\n\u003cli\u003eCompact size for discreet installation in tight spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 3M adhesive option allows tool-free installation on surfaces where drilling is not possible\u003c\/li\u003e\n\u003cli\u003eBrown finish matches standard brown PVC or wooden frames, reducing visual impact\u003c\/li\u003e\n\u003cli\u003eUsing both adhesive and screws simultaneously gives the most secure permanent fixing\u003c\/li\u003e\n\u003cli\u003eSmall dimensions allow fitting on narrow aluminium or PVC profiles\u003c\/li\u003e\n\u003cli\u003e3 cm gap tolerance accommodates slight misalignment between the door and frame halves\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ML-2012BR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wired magnetic contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Brown\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 3M adhesive tape, screws, or both\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Gap:\u003c\/strong\u003e 3 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H):\u003c\/strong\u003e 1.25 × 2.8 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe brown colour is inconspicuous on most wooden and PVC door or window frames\u003c\/li\u003e\n\u003cli\u003eTwo fixing methods in one unit means no additional hardware is needed for most installations\u003c\/li\u003e\n\u003cli\u003eCompact footprint keeps the sensor hidden from view on slim frames\u003c\/li\u003e\n\u003cli\u003eCompatible with standard wired alarm inputs on any panel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Default Title","offer_id":56578866905470,"sku":"225012","price":2.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675163836798.webp?v=1779636009"},{"product_id":"other-ml-13s-wired-magnetic-contact-white","title":"ML-13S Wired Magnetic Contact White – 2 cm Gap, 3M Adhesive \u0026 Screw Mount","description":"\u003cp\u003eThe ML-13S is a wired magnetic contact in white, designed for use with alarm systems that require detection on doors, windows, roller shutters, or aluminium frames. Its small size and dual-fixing method — 3M adhesive tape, screws, or both simultaneously — mean it can be mounted in nearly any position without structural modification.\u003c\/p\u003e\u003cp\u003eIt operates with a magnetic gap of up to 2 cm, giving flexibility in fitting on frames where the magnet and switch halves cannot be mounted perfectly flush.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWired magnetic contact for alarm system integration\u003c\/li\u003e\n\u003cli\u003eWhite colour — blends with white door and window frames\u003c\/li\u003e\n\u003cli\u003eDual mounting: 3M adhesive tape, screws, or both at the same time\u003c\/li\u003e\n\u003cli\u003eMagnetic gap: 2 cm\u003c\/li\u003e\n\u003cli\u003eCompact size for discreet installation in tight spaces\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 3M adhesive option allows tool-free installation on surfaces where drilling is not possible\u003c\/li\u003e\n\u003cli\u003eWhite finish matches standard white PVC or wooden frames, reducing visual impact\u003c\/li\u003e\n\u003cli\u003eUsing both adhesive and screws simultaneously gives the most secure permanent fixing\u003c\/li\u003e\n\u003cli\u003eSmall dimensions allow fitting on narrow aluminium or PVC profiles\u003c\/li\u003e\n\u003cli\u003e2 cm gap tolerance accommodates slight misalignment between the door and frame halves\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ML-13S\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wired magnetic contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e 3M adhesive tape, screws, or both\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Gap:\u003c\/strong\u003e 2 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H):\u003c\/strong\u003e 1.25 × 2.6 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe white colour is inconspicuous on most white PVC or wooden door and window frames\u003c\/li\u003e\n\u003cli\u003eTwo fixing methods in one unit means no additional hardware is needed for most installations\u003c\/li\u003e\n\u003cli\u003eCompact footprint keeps the sensor hidden from view on slim frames\u003c\/li\u003e\n\u003cli\u003eCompatible with standard wired alarm inputs on any panel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Default Title","offer_id":56578866971006,"sku":"225011","price":2.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675163902334.webp?v=1779636014"},{"product_id":"other-ml-203r-wired-flush-mounted-magnetic-contact","title":"ML-203R Wired Flush-Mounted Magnetic Contact – 2 cm Gap, White \u0026 Recessed Door Sensor","description":"\u003cp\u003eThe ML-203R is a wired recessed magnetic contact for alarm systems. Its flush-mount design allows it to be embedded inside the door or window frame, leaving only a small cylindrical body visible. It operates reliably at separation distances of up to 2 cm between the magnet and switch halves.\u003c\/p\u003e\u003cp\u003eThe unit is suitable for a broad range of door and window types and is supplied in white to match standard frame finishes.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eFlush (recessed) mounting for concealed installation inside door or window frames\u003c\/li\u003e\n\u003cli\u003eWired connection to alarm panels\u003c\/li\u003e\n\u003cli\u003eWhite colour\u003c\/li\u003e\n\u003cli\u003eMagnetic operating gap: 2 cm\u003c\/li\u003e\n\u003cli\u003eCompact cylindrical body for installation in tight frame profiles\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eRecessed mounting hides the sensor inside the frame — virtually invisible once installed\u003c\/li\u003e\n\u003cli\u003e2 cm gap tolerance covers typical door-to-frame clearances without precise alignment\u003c\/li\u003e\n\u003cli\u003eWired connection provides reliable signal transmission with no battery to replace\u003c\/li\u003e\n\u003cli\u003eSmall diameter allows installation in aluminium, PVC, and wooden profiles\u003c\/li\u003e\n\u003cli\u003eWhite finish matches the majority of interior door and window frame colours\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e ML-203R\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wired flush-mounted (recessed) magnetic contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Gap:\u003c\/strong\u003e 2 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×D):\u003c\/strong\u003e 0.9 × 1.5 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe hidden installation keeps your alarm sensors out of sight on interior doors and windows\u003c\/li\u003e\n\u003cli\u003eNo batteries required — once installed, the contact needs no maintenance\u003c\/li\u003e\n\u003cli\u003eThe very small 0.9 × 1.5 cm body fits in profiles where surface-mount contacts cannot\u003c\/li\u003e\n\u003cli\u003eReliable wired connection compatible with standard NC alarm inputs on any panel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Default Title","offer_id":56578867298686,"sku":"225013","price":2.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675163967870.webp?v=1779636022"},{"product_id":"other-dinsafer-helio-wireless-door-window-contact-sensor-dwc","title":"Dinsafer Helio DWCH1 Wireless Door\/Window Sensor – 433.92 MHz, 1000 m \u0026 Tamper","description":"\u003cp\u003eThe Dinsafer Helio DWCH1 is a wireless magnetic contact sensor designed as a zone detector for the Dinsafer Helio smart alarm system. When the transmitter and magnet are separated — as occurs when a door or window is opened — the sensor transmits an alarm signal to the main panel over the 433.92 MHz frequency band. The main panel then triggers the alarm and can send an SMS notification to the user for battery replacement when needed.\u003c\/p\u003e\u003cp\u003eThe sensor supports the DinsafeR Ready to Arm feature and includes tamper protection. The transmitter can be mounted on either the left or right side of the magnet, providing installation flexibility for doors and windows that open in either direction. The sensor is suitable for most standard door and window frames.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWireless magnetic contact sensor operating at 433.92 MHz\u003c\/li\u003e\n\u003cli\u003eTransmission distance: up to 1000 m without obstacle\u003c\/li\u003e\n\u003cli\u003eDinsafeR Ready to Arm feature supported\u003c\/li\u003e\n\u003cli\u003eTamper protection supported\u003c\/li\u003e\n\u003cli\u003eTransmitter mountable on either left or right side of the magnet\u003c\/li\u003e\n\u003cli\u003eMain panel sends SMS to user when battery replacement is needed\u003c\/li\u003e\n\u003cli\u003eWorking voltage: DC 3 V\u003c\/li\u003e\n\u003cli\u003eBattery: 1 × CR123 (3 V)\u003c\/li\u003e\n\u003cli\u003eWorking current: ≤100 mA\u003c\/li\u003e\n\u003cli\u003eStandby current: ≤15 μA\u003c\/li\u003e\n\u003cli\u003eWorking temperature: -10°C to 50°C\u003c\/li\u003e\n\u003cli\u003eHumidity: ≤90% rh (non-condensing)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe 1000 m open-air range far exceeds typical building dimensions, ensuring reliable signal delivery from any door or window to the main panel without repeaters\u003c\/li\u003e\n\u003cli\u003eThe SMS battery-low notification means the user is informed before the battery actually fails, preventing undetected gaps in coverage\u003c\/li\u003e\n\u003cli\u003eTamper protection detects and alerts if the sensor housing is opened or removed, indicating a possible attempt to defeat the detector\u003c\/li\u003e\n\u003cli\u003eThe DinsafeR Ready to Arm feature integrates with the Helio panel to allow arming only when all zones report closed\u003c\/li\u003e\n\u003cli\u003eFlexible left\/right transmitter mounting adapts to virtually any door or window frame configuration\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e DWCH1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCompatible System:\u003c\/strong\u003e Dinsafer Helio smart alarm series\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Frequency:\u003c\/strong\u003e 433.92 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Distance:\u003c\/strong\u003e Up to 1000 m (without obstacle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Voltage:\u003c\/strong\u003e DC 3 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 1 × CR123 (3 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Current:\u003c\/strong\u003e ≤100 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby Current:\u003c\/strong\u003e ≤15 μA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Temperature:\u003c\/strong\u003e -10°C to 50°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity:\u003c\/strong\u003e ≤90% rh (non-condensing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (without battery):\u003c\/strong\u003e 22 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight (with battery):\u003c\/strong\u003e 38 g\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitter Dimensions (L × W × H):\u003c\/strong\u003e 84 × 26 × 22 mm (±0.1 mm)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Dimensions (L × W × H):\u003c\/strong\u003e 34 × 11 × 9 mm (±0.1 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe slim transmitter (84 × 26 × 22 mm) fits neatly on narrow door and window frames without protruding or interfering with operation\u003c\/li\u003e\n\u003cli\u003eThe 1000 m wireless range means the sensor works reliably even when installed on outbuilding doors or garden gates far from the main panel\u003c\/li\u003e\n\u003cli\u003eThe standby current of ≤15 μA keeps the CR123 battery running for an extended period between changes\u003c\/li\u003e\n\u003cli\u003eNo wiring is required — the sensor attaches with surface mounting, making installation non-destructive and reversible\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Default Title","offer_id":56579025797502,"sku":"225018","price":23.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675203715454.webp?v=1779636927"},{"product_id":"other-dinsafer-helio-wireless-vibration-sensor-dvbh1","title":"Dinsafer Helio DVBH1 Wireless Vibration Sensor – 433.92 MHz, 1000 m \u0026 Tamper","description":"\u003cp\u003eThe Dinsafer Helio DVBH1 is a wireless vibration sensor designed as an accessory for the Helio smart alarm system. When the sensor detects vibration, it immediately transmits a trigger signal to the Helio main panel, which can then activate the siren and send alerts.\u003c\/p\u003e\u003cp\u003eThe sensor is powered by a single CR123A (3 V) button battery and features RF supervision to confirm the radio link with the panel is active. Tamper protection triggers an alert if the unit is removed. Low battery warnings are sent by the main panel via SMS when replacement is needed.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eVibration detection with immediate trigger signal to the main panel\u003c\/li\u003e\n\u003cli\u003eRF supervision for continuous link monitoring\u003c\/li\u003e\n\u003cli\u003eTamper protection\u003c\/li\u003e\n\u003cli\u003eLow battery SMS alert from the main panel\u003c\/li\u003e\n\u003cli\u003eWireless transmission at 433.92 MHz, up to 1000 m without obstacle\u003c\/li\u003e\n\u003cli\u003ePowered by 1 × CR123A (3 V) battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eVibration sensing is effective on safes, drawers, doors, and windows — any surface that shakes on unauthorised contact\u003c\/li\u003e\n\u003cli\u003eRF supervision provides a continuous health-check of the wireless link, flagging connection loss before it becomes a security gap\u003c\/li\u003e\n\u003cli\u003eTamper protection means physically removing the sensor is itself an alarm event\u003c\/li\u003e\n\u003cli\u003eAt only 18 g without the battery and 84×26×22 mm, the sensor attaches to surfaces without being conspicuous\u003c\/li\u003e\n\u003cli\u003eSMS battery replacement notification from the panel eliminates manual battery inspection\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e DVBH1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Voltage:\u003c\/strong\u003e DC 3 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 1 × CR123A (3 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Current:\u003c\/strong\u003e ≤100 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby Current:\u003c\/strong\u003e ≤15 μA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Distance:\u003c\/strong\u003e 1000 m (without obstacle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Frequency:\u003c\/strong\u003e 433.92 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Supervision:\u003c\/strong\u003e Supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTamper Protection:\u003c\/strong\u003e Supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Temperature:\u003c\/strong\u003e -10°C to +50°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity:\u003c\/strong\u003e ≤90% rh (non-condensing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 18 g (without battery); 34 g (with battery)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (L×W×H):\u003c\/strong\u003e 84×26×22 mm (±0.1 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eOne sensor covers a wide range of attachment points — safes, filing cabinets, window frames, and door panels all work with a single sensor type\u003c\/li\u003e\n\u003cli\u003eThe slender 84×26×22 mm form factor fits on the edge of a drawer or safe door without interfering with normal operation\u003c\/li\u003e\n\u003cli\u003eCR123A batteries are widely available and the ≤15 μA standby current gives long service between changes\u003c\/li\u003e\n\u003cli\u003ePart of the Helio ecosystem: pairs directly with the same panel as door sensors, smoke detectors, and sirens\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Default Title","offer_id":56579030057342,"sku":"225023","price":18.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675204829566.webp?v=1779636964"},{"product_id":"other-dinsafer-helio-wireless-roller-shutter-door-contact-se","title":"Dinsafer Helio DGDH1 Wireless Roller Shutter Sensor – 433.92 MHz, 1000 m \u0026 Tamper","description":"\u003cp\u003eThe Dinsafer Helio DGDH1 is a wireless contact sensor specifically designed for roller shutter doors, working as an accessory for the Helio smart alarm system. When the roller shutter door is opened while the system is armed, the sensor transmits a trigger signal to the Helio main panel, which activates the configured alarm response.\u003c\/p\u003e\u003cp\u003eThe sensor uses a reed-and-magnet design: the transmitter and reed part attach to the shutter frame, while the magnetic part attaches to the moving door surface. A 290 mm connecting line allows for flexible positioning. Energy saving mode and RF supervision keep the power draw low, while the main panel sends an SMS to the user when battery replacement is needed. Tamper protection triggers an alert if the unit is removed.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDesigned for roller shutter doors — reed-and-magnet contact detection\u003c\/li\u003e\n\u003cli\u003eTriggers alarm when shutter opens under armed status\u003c\/li\u003e\n\u003cli\u003eRF supervision for continuous wireless link monitoring\u003c\/li\u003e\n\u003cli\u003eTamper protection\u003c\/li\u003e\n\u003cli\u003eLow battery SMS notification from the main panel\u003c\/li\u003e\n\u003cli\u003eWireless transmission at 433.92 MHz, up to 1000 m without obstacle\u003c\/li\u003e\n\u003cli\u003ePowered by 1 × CR123A (3 V) battery\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDedicated roller shutter design uses a 170 mm magnetic part that runs the full vertical width of a standard shutter door contact zone\u003c\/li\u003e\n\u003cli\u003eRF supervision actively monitors the wireless link, flagging any loss of contact with the panel before it creates a coverage gap\u003c\/li\u003e\n\u003cli\u003eTamper protection means physical removal of the sensor triggers an alarm, deterring disabling by intruders\u003c\/li\u003e\n\u003cli\u003eAt only 169 g without the battery, the complete assembly is lightweight and does not place load on the shutter mechanism\u003c\/li\u003e\n\u003cli\u003eThe 290 mm connecting line provides mounting flexibility where the transmitter and reed part cannot be collocated directly\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e DGDH1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Voltage:\u003c\/strong\u003e DC 3 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBattery:\u003c\/strong\u003e 1 × CR123A (3 V)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Current:\u003c\/strong\u003e ≤100 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby Current:\u003c\/strong\u003e ≤15 μA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Distance:\u003c\/strong\u003e 1000 m (without obstacle)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmission Frequency:\u003c\/strong\u003e 433.92 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF Supervision:\u003c\/strong\u003e Supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTamper Protection:\u003c\/strong\u003e Supported\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWorking Temperature:\u003c\/strong\u003e -10°C to +50°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHumidity:\u003c\/strong\u003e ≤90% rh (non-condensing)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 169 g (without battery); 185 g (with battery)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReed Part Dimensions:\u003c\/strong\u003e 38×15×10 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnetic Part Dimensions:\u003c\/strong\u003e 15×170×15 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransmitter Dimensions:\u003c\/strong\u003e 84×26×22 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnecting Line Length:\u003c\/strong\u003e 290 mm (L×W×H ±0.1 mm)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe long 170 mm magnetic strip accommodates the wide contact gap geometry of roller shutter doors, which standard door sensors cannot cover\u003c\/li\u003e\n\u003cli\u003eOne CR123A battery powers the unit; the panel sends an SMS replacement reminder so the battery is never silently depleted\u003c\/li\u003e\n\u003cli\u003eThe slim transmitter (84×26×22 mm) attaches to a shutter frame without obstructing the door travel or surrounding structure\u003c\/li\u003e\n\u003cli\u003ePart of the Helio ecosystem: pairs with the same panel as motion sensors, smoke detectors, and the outdoor siren\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Other","offers":[{"title":"Default Title","offer_id":56579035857278,"sku":"225024","price":30.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675205943678.webp?v=1779616870"},{"product_id":"isnatch-heysense-smart-wi-fi-door-window-detector","title":"iSNATCH HeySense Wi-Fi Door \u0026 Window Sensor – Magnetic Contact, App Alerts \u0026 AAA Battery","description":"\u003cp\u003eThe iSNATCH HeySense is a wireless magnetic contact sensor that monitors whether a door or window is open or closed. It connects over 2.4GHz Wi-Fi and communicates with the HeySmart app on Android or iOS, delivering push notifications in real time so you know the status of any monitored entry even when away from home.\u003c\/p\u003e\u003cp\u003eThe sensor consists of two parts: a transmitter (70×21×24 mm) fixed to the door or window frame, and a magnet (41×18×15 mm) attached to the moving part. Maximum contact distance between the two pieces is under 15 mm. It runs on two AAA 1.5V batteries, with a standby draw of under 45μA to extend battery life.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSmart Wi-Fi magnetic contact sensor (2.4GHz)\u003c\/li\u003e\n\u003cli\u003ePush notifications via HeySmart app: open, close, or both, with low-battery alert\u003c\/li\u003e\n\u003cli\u003eConfigurable notification triggers: open only, close only, open and close\u003c\/li\u003e\n\u003cli\u003eSupports smart home automations (e.g. trigger a light when a door opens)\u003c\/li\u003e\n\u003cli\u003eTwo-piece design: TX unit 70×21×24 mm + magnet 41×18×15 mm\u003c\/li\u003e\n\u003cli\u003eMaximum contact detection distance: \u0026lt;15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eReal-time push notifications let you monitor entrances remotely — useful for tracking when children arrive home or detecting unexpected entries\u003c\/li\u003e\n\u003cli\u003eConfigurable notification modes (open only, close only, both) reduce alert fatigue by sending only the events you care about\u003c\/li\u003e\n\u003cli\u003eIntegration with other HeySmart devices enables automations: for example, automatically turning on a light when a front door opens\u003c\/li\u003e\n\u003cli\u003eLow standby consumption (\u0026lt;45μA) significantly extends battery life compared to devices with higher idle draws\u003c\/li\u003e\n\u003cli\u003eWireless installation removes the need to run cables to doors and windows, simplifying setup in any home\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e 2×AAA 1.5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandby Consumption:\u003c\/strong\u003e \u0026lt;45μA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConsumption in Alarm:\u003c\/strong\u003e \u0026lt;130mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWi-Fi:\u003c\/strong\u003e 2.4GHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaximum Contact Distance:\u003c\/strong\u003e \u0026lt;15 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Temperature:\u003c\/strong\u003e 0°C ~ +45°C\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTX Dimensions:\u003c\/strong\u003e 70×21×24 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Dimensions:\u003c\/strong\u003e 41×18×15 mm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo hub or gateway required — the sensor connects directly to your existing 2.4GHz Wi-Fi router\u003c\/li\u003e\n\u003cli\u003eThe HeySmart app allows scheduling notifications so alerts only arrive during hours you specify\u003c\/li\u003e\n\u003cli\u003eTwo-battery AAA power is easy to source and replace anywhere\u003c\/li\u003e\n\u003cli\u003eThe compact TX unit (70×21×24 mm) sits discreetly on a door frame without dominating the entrance aesthetics\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"iSNATCH","offers":[{"title":"Default Title","offer_id":56579211886974,"sku":"251119","price":17.36,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675249951102.webp?v=1779638315"},{"product_id":"oem-bs-2012wh-wired-magnetic-contact-white","title":"BS-2012WH Wired Magnetic Door\/Window Contact – Surface Mount, 1.3×2.8 cm, White","description":"\u003cp\u003eThe BS-2012WH is a wired magnetic contact for alarm and security systems. It is supplied in white and measures 1.3x2.8 cm, a compact size that suits most door and window frame profiles without being visually obtrusive. The unit consists of the contact body and a matching magnet, with an operating gap of approximately 3 cm.\u003c\/p\u003e\u003cp\u003eMounting is flexible: the included 3M adhesive tape allows tool-free installation on smooth surfaces, while the screw fixing option suits timber, PVC, and aluminium frames. Both methods can be used simultaneously for additional retention. The 44 cm AWG24 cable connects to a wired alarm panel or control unit.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWired magnetic contact\u003c\/li\u003e\n\u003cli\u003eWhite colour\u003c\/li\u003e\n\u003cli\u003eDimensions: 1.3x2.8 cm\u003c\/li\u003e\n\u003cli\u003eOperating gap: approximately 3 cm\u003c\/li\u003e\n\u003cli\u003e44 cm AWG24 cable\u003c\/li\u003e\n\u003cli\u003e3M adhesive tape included\u003c\/li\u003e\n\u003cli\u003eScrew mounting also supported\u003c\/li\u003e\n\u003cli\u003eCompatible with doors, windows, shutters, and aluminium frames\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThree mounting options — adhesive, screw, or both combined — allow installation without drilling where surfaces must not be pierced, or a secure screw-fixed installation on timber and metal frames\u003c\/li\u003e\n\u003cli\u003eThe 3M adhesive backing provides an immediately bonded, no-drill installation on flat, clean surfaces\u003c\/li\u003e\n\u003cli\u003eA 3 cm operating gap gives tolerances for doors and windows that do not close with perfect alignment, reducing false triggers\u003c\/li\u003e\n\u003cli\u003eAWG24 cable is the standard gauge for alarm circuits, compatible with all typical wired alarm panels\u003c\/li\u003e\n\u003cli\u003eThe 1.3x2.8 cm body is small enough to be unobtrusive on standard door and window rebates\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e BS-2012WH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wired magnetic contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (WxH):\u003c\/strong\u003e 1.3x2.8 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating Gap:\u003c\/strong\u003e approximately 3 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 44 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Gauge:\u003c\/strong\u003e AWG24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e 3M tape (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing Methods:\u003c\/strong\u003e Adhesive, screw, or both\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe choice between adhesive, screw, or combined fixing means this contact adapts to virtually any mounting situation without additional hardware\u003c\/li\u003e\n\u003cli\u003eThe white finish matches standard door and window frames, making the sensor inconspicuous once installed\u003c\/li\u003e\n\u003cli\u003eAt 1.3x2.8 cm the body is among the smaller magnetic contacts available, leaving minimal visual impact on the frame\u003c\/li\u003e\n\u003cli\u003eSuitable for aluminium frames — a common material where some contacts require special consideration — confirmed in the reference\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oem","offers":[{"title":"Default Title","offer_id":56579234234750,"sku":"555080","price":1.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675257946494.webp?v=1779638632"},{"product_id":"oem-bs-2012gr-wired-magnetic-contact-grey","title":"BS-2012GR Wired Magnetic Door\/Window Contact – Surface Mount, 3M Adhesive \u0026 Screws, Grey","description":"\u003cp\u003eThe BS-2012GR is a compact grey wired magnetic contact for use with alarm systems. Its small dimensions make it easy to fit discreetly on doors, windows, shutters, and aluminium profiles without obstructing operation.\u003c\/p\u003e\u003cp\u003eInstallation is flexible: the unit can be fixed with the supplied 3M adhesive sticker, machine screws, or a combination of both — giving installers the option that best suits the surface material and finish requirements.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eWired magnetic contact with 44 cm AWG24 cable\u003c\/li\u003e\n\u003cli\u003eDual-fixing method: 3M adhesive sticker or screws (or both simultaneously)\u003c\/li\u003e\n\u003cli\u003eGrey colour finish for discreet installation\u003c\/li\u003e\n\u003cli\u003eSmall dimensions: 1.3 × 2.8 cm\u003c\/li\u003e\n\u003cli\u003eDetection gap: approximately 3 cm\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThe AWG24 cable provides reliable signal transmission to the alarm panel without requiring additional cabling\u003c\/li\u003e\n\u003cli\u003e3M adhesive backing means no drilling is needed on glass, aluminium, or finished surfaces\u003c\/li\u003e\n\u003cli\u003eSmall footprint keeps the contact hidden from view on narrow door or window frames\u003c\/li\u003e\n\u003cli\u003eCompatible with a broad range of surfaces including wood, aluminium, and uPVC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e BS-2012GR\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Wired magnetic contact\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Grey\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Length:\u003c\/strong\u003e 44 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable Gauge:\u003c\/strong\u003e AWG24\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W × H):\u003c\/strong\u003e 1.3 × 2.8 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetection Gap:\u003c\/strong\u003e approx. 3 cm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAdhesive:\u003c\/strong\u003e 3M sticker included\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFixing Method:\u003c\/strong\u003e Adhesive, screws, or both\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNo additional adhesive or fasteners needed — 3M tape and screws are supplied in the box\u003c\/li\u003e\n\u003cli\u003eWorks on a wide variety of entry points including aluminium sliding doors and louvered shutters\u003c\/li\u003e\n\u003cli\u003eThe compact size means it can be positioned even where frame space is minimal\u003c\/li\u003e\n\u003cli\u003eSimple wired connection integrates directly with any standard alarm control panel\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oem","offers":[{"title":"Default Title","offer_id":56579234431358,"sku":"555081","price":2.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675258405246.webp?v=1779638637"},{"product_id":"gbc-24-0529-20-switch-for-doors-and-leaves-html","title":"GBC 24.0529.20 Door \u0026 Shutter Momentary Switch 2 A 250 V – OFF-(ON), IP20 \u0026 Panel Mount","description":"\u003cp\u003eThe GBC 24.0529.20 is a momentary push-button switch designed to control lighting linked to a door or shutter. When the door closes against the plunger, the contacts open and the light turns off; when the door opens and releases the plunger, the contacts close and the light turns on.\u003c\/p\u003e\u003cp\u003eThe switch has an OFF-(ON) momentary action with two contact positions and is suitable for surface or panel mounting in cabinets, wardrobes, fridges and shutter mechanisms. A compact 32x34mm body and screw terminals make wiring straightforward.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003ePush-button function with instantaneous OFF-(ON) action\u003c\/li\u003e\n\u003cli\u003eRated 2A at 250Vac for lighting and low-current loads\u003c\/li\u003e\n\u003cli\u003e2-pin screw terminals for secure, tool-friendly wiring\u003c\/li\u003e\n\u003cli\u003eIP20 ingress protection for indoor enclosed applications\u003c\/li\u003e\n\u003cli\u003eCompact 32x34mm body weighs only 8g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAutomates lighting control inside cabinets, wardrobes and shutter boxes\u003c\/li\u003e\n\u003cli\u003eMomentary action returns to OFF automatically when the door closes\u003c\/li\u003e\n\u003cli\u003eTwo-position design fits a wide range of door and shutter fixtures\u003c\/li\u003e\n\u003cli\u003eLightweight 8g body adds no significant load to the host fixture\u003c\/li\u003e\n\u003cli\u003eWhite finish blends into most cabinet interiors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFunction:\u003c\/strong\u003e Push-Button\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eType:\u003c\/strong\u003e Switch\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAction:\u003c\/strong\u003e Instantaneous (momentary)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eContacts:\u003c\/strong\u003e OFF-(ON)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePositions:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRating:\u003c\/strong\u003e 2A - 250Vac\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePins:\u003c\/strong\u003e 2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProtection:\u003c\/strong\u003e IP20\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e White\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e On panel\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerminals:\u003c\/strong\u003e Screw\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions:\u003c\/strong\u003e 32x34mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 8g\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIdeal for cabinet lighting, wardrobe interiors and shutter limit detection\u003c\/li\u003e\n\u003cli\u003eScrew terminals accept standard wiring without special tooling\u003c\/li\u003e\n\u003cli\u003eCompact footprint fits tight panel cut-outs and door frames\u003c\/li\u003e\n\u003cli\u003ePackage includes 1x GBC 24.0529.20 push-button door switch\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"GBC","offers":[{"title":"Default Title","offer_id":56579544351102,"sku":"219334","price":3.8,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675300512126.webp?v=1779640337"},{"product_id":"oem-spark-mc-smmc-a1-heavy-duty-wired-magnetic-contact-metal","title":"Oem Spark-MC SMMC-A1 Heavy Duty Wired Magnetic Contact – Metal Housing \u0026 Door\/Window Alarm","description":"\u003cp\u003eThe Oem Spark-MC-SMMC-A1 Heavy Duty Wired Magnetic Contact Metal is a sensors from Oem, suitable for sensors applications. Built to deliver reliable everyday performance, it ships ready-to-use with the standard fittings and connectors expected for its category.\u003c\/p\u003e\u003cp\u003eWhether you're upgrading existing equipment or building a new setup, this product offers the build quality and standards-compliance required for both home and commercial environments.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSensors from Oem\u003c\/li\u003e\n\u003cli\u003eDesigned for sensors use\u003c\/li\u003e\n\u003cli\u003eReady-to-use with standard fittings and connectors\u003c\/li\u003e\n\u003cli\u003eBuilt to recognised quality and safety standards\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDrop-in replacement or upgrade — no specialist installation required\u003c\/li\u003e\n\u003cli\u003eReliable performance for both residential and commercial applications\u003c\/li\u003e\n\u003cli\u003eCompatible with standard equipment in this category\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eBrand: Oem\u003c\/li\u003e\n\u003cli\u003eType: Sensors\u003c\/li\u003e\n\u003cli\u003eCategory: Security \u0026amp; Smart Home\u003c\/li\u003e\n\u003cli\u003eSubcategory: Sensors\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eTrusted Oem build quality\u003c\/li\u003e\n\u003cli\u003eStandards-compliant fitment with existing equipment\u003c\/li\u003e\n\u003cli\u003eSuitable for everyday domestic use and demanding commercial environments\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oem","offers":[{"title":"Default Title","offer_id":56579883008382,"sku":"PN15338","price":9.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675341373822.webp?v=1779641773"},{"product_id":"spark-smmc-a1-heavy-duty-wired-magnetic-contact-metal-reed-30mm-range","title":"Spark SMMC-A1 Heavy Duty Wired Magnetic Contact – Metal, Reed, 30mm Range","description":"\u003cp\u003eThe Spark MC-SMMC-A1 is a heavy-duty wired magnetic contact in metal construction, using Reed technology with a neodymium magnet for detection up to 30mm — with a 37cm metal mesh-protected 2-wire cable and screw mounting.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHeavy-duty metal construction\u003c\/li\u003e\n\u003cli\u003eReed technology with neodymium magnet\u003c\/li\u003e\n\u003cli\u003eMaximum detection distance: up to 30mm (depending on installation material)\u003c\/li\u003e\n\u003cli\u003e2-wire cable protected by 37cm metal mesh\u003c\/li\u003e\n\u003cli\u003eScrew mounting included\u003c\/li\u003e\n\u003cli\u003eDetector dimensions: 49 × 9.6 × 20mm\u003c\/li\u003e\n\u003cli\u003eMagnet dimensions: 49 × 9.6 × 20mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMetal body withstands demanding environments including garages and industrial premises\u003c\/li\u003e\n\u003cli\u003eNeodymium magnet provides reliable activation across a range of installation materials\u003c\/li\u003e\n\u003cli\u003eMetal mesh cable protection prevents damage in high-traffic installation areas\u003c\/li\u003e\n\u003cli\u003eUp to 30mm detection gap tolerates imperfect door\/frame alignment\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrand:\u003c\/strong\u003e Spark\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e MC-SMMC-A1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTechnology:\u003c\/strong\u003e Reed with neodymium magnet\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMaterial:\u003c\/strong\u003e Metal\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Detection Distance:\u003c\/strong\u003e Up to 30mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCable:\u003c\/strong\u003e 2-wire, 37cm metal mesh-protected\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDetector Dimensions:\u003c\/strong\u003e 49 × 9.6 × 20mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMagnet Dimensions:\u003c\/strong\u003e 49 × 9.6 × 20mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting:\u003c\/strong\u003e Screw (included)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSKU:\u003c\/strong\u003e 225030\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 8435325444772\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eMetal construction handles the rigour of garage and industrial door installations\u003c\/li\u003e\n\u003cli\u003eCompact 49mm body fits most door frame profiles\u003c\/li\u003e\n\u003cli\u003eScrew mounting ensures stable, permanent installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Oem","offers":[{"title":"Default Title","offer_id":57463009280382,"sku":"225030","price":9.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15932858892670.webp?v=1779801125"}],"url":"https:\/\/lynk.gr\/en-eu\/collections\/security-door-window-sensors.oembed","provider":"Lynk.gr","version":"1.0","type":"link"}