{"title":"Anttron","description":"\u003cp\u003eAnttron offers TV signal distribution equipment, including HDMI modulators, RF and DVB-T modulators, TV signal amplifiers and TV signal splitters. Suited to distributing and converting television signals across an installation, the Anttron range is available at Lynk.gr with delivery across Greece.\u003c\/p\u003e","products":[{"product_id":"anttron-tm300","title":"Anttron TM300 RCA to DVB-T Modulator – 2-Input UHF 470-862 MHz, QAM Selectable \u0026 35 dB MER","description":"\u003cp\u003eThe Anttron TM300 is a dual-input RCA to DVB-T modulator. It accepts two composite video sources via 3RCA Cinch and two F female (MIX) connectors, then encodes and modulates them as a DVB-T COFDM signal across the UHF frequency range of 470–862 MHz. This makes it suitable for distributing sources such as set-top boxes, DVD players, or gaming consoles to multiple televisions in hotels, hospitals, or other centralised antenna systems.\u003c\/p\u003e\n\u003cp\u003eThe output channel bandwidth is selectable at 7 or 8 MHz, with adjustable output level and a choice of QPSK, 16QAM, or 64QAM modulation, allowing integration into existing DVB-T distribution networks.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTwo composite RCA inputs (3RCA Cinch) and two F female MIX inputs\u003c\/li\u003e\n\u003cli\u003eDVB-T COFDM output on UHF range 470–862 MHz\u003c\/li\u003e\n\u003cli\u003eSelectable output channel bandwidth: 7 or 8 MHz\u003c\/li\u003e\n\u003cli\u003eModulation: QPSK, 16QAM, 64QAM (optional)\u003c\/li\u003e\n\u003cli\u003eFEC rates: 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003eAdjustable output level: 75–95 dBμV (20 dB range)\u003c\/li\u003e\n\u003cli\u003eMER output: \u0026gt;35 dB\u003c\/li\u003e\n\u003cli\u003eInput video modulation support: PAL, NTSC, SECAM\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConverts legacy RCA sources to DVB-T, making them viewable on any TV in a centralised coaxial distribution system\u003c\/li\u003e\n\u003cli\u003eTwo simultaneous inputs allow two independent sources to be distributed from a single unit\u003c\/li\u003e\n\u003cli\u003eSelectable modulation and FEC settings enable fine-tuning for the receiving environment\u003c\/li\u003e\n\u003cli\u003eAdjustable output level accommodates different distribution network configurations\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 2 x 3RCA Cinch; 2 x F female MIX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Level (Video Baseband, yellow):\u003c\/strong\u003e 0.7–1.5 Vpp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Level (Audio, white=left, red=right):\u003c\/strong\u003e 0.5–2.5 Vpp\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput Video Modulation:\u003c\/strong\u003e PAL, NTSC, SECAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Standard:\u003c\/strong\u003e COFDM DVB-T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Channel Bandwidth:\u003c\/strong\u003e 7 \/ 8 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Modulation:\u003c\/strong\u003e QPSK, 16QAM, 64QAM (optional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFEC:\u003c\/strong\u003e 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level (Adjustable):\u003c\/strong\u003e 75–95 dBμV (20 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMER Output:\u003c\/strong\u003e \u0026gt;35 dB\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eTransforms any RCA-output source into a channel available on every TV in a coaxial distribution network\u003c\/li\u003e\n\u003cli\u003eMER output of \u0026gt;35 dB ensures a clean, stable signal across the distribution system\u003c\/li\u003e\n\u003cli\u003eFlexible modulation and FEC options make it compatible with a wide range of DVB-T receivers\u003c\/li\u003e\n\u003cli\u003ePAL, NTSC, and SECAM input support means it accepts sources from different regions without conversion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56563775373694,"sku":"220116","price":530.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671409049982.webp?v=1779627620"},{"product_id":"anttron-tm190hd","title":"Anttron TM190HD HDMI to DVB-T COFDM Modulator – RF Mix Input, USB Record \u0026 40 dB MER","description":"\u003cp\u003eThe Anttron TM190HD converts an HDMI signal — from any source at standard resolutions — into a DVB-T RF output that can be injected into an existing terrestrial or cable coaxial network. The module accepts one HDMI input and one RF mix input, combining them at the RF output. A USB stick is included for recording and playback directly from the unit.\u003c\/p\u003e\n\u003cp\u003eDesigned for professional headend installations, the TM190HD delivers a modulation error rate of 40 dB, on a par with premium headend equipment, while drawing only 5 W.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e1 HDMI input capable of receiving all standard resolutions\u003c\/li\u003e\n\u003cli\u003e1 RF mix input (F female, 5–1002 MHz) to pass through existing terrestrial or cable signals\u003c\/li\u003e\n\u003cli\u003e1 RF output combining the HDMI-derived DVB-T channel with the signals from the RF input\u003c\/li\u003e\n\u003cli\u003eCOFDM standard: DVB-T output with selectable 7\/8 MHz channel bandwidth\u003c\/li\u003e\n\u003cli\u003eCarrier modulation: QPSK, 16QAM, 64QAM (optional)\u003c\/li\u003e\n\u003cli\u003eFEC options: 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003eUSB record and play function (USB stick included)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAdds any HDMI source to a coaxial TV distribution network without rewiring\u003c\/li\u003e\n\u003cli\u003ePass-through RF input preserves existing channels while the modulator inserts a new one\u003c\/li\u003e\n\u003cli\u003e40 dB MER ensures clean, artefact-free picture quality across the distribution network\u003c\/li\u003e\n\u003cli\u003eLow 5 W consumption suits always-on headend environments\u003c\/li\u003e\n\u003cli\u003eUSB playback allows local content to be broadcast over the network without a separate player\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 1 × HDMI, 2 × F female MIX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eModulation (video standard):\u003c\/strong\u003e PAL, NTSC, SECAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF mix input frequency range:\u003c\/strong\u003e 5–1002 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRF mix input loss:\u003c\/strong\u003e 2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCOFDM standard:\u003c\/strong\u003e DVB-T\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput channel bandwidth:\u003c\/strong\u003e 7\/8 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCarrier modulation:\u003c\/strong\u003e QPSK, 16QAM, 64QAM (optional)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFEC:\u003c\/strong\u003e 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput frequency range:\u003c\/strong\u003e 170–230 MHz \/ 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level (adjustable):\u003c\/strong\u003e 75÷90 dBμV (15 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMER output:\u003c\/strong\u003e 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 5 W\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSlot-in module format integrates neatly into existing headend racks\u003c\/li\u003e\n\u003cli\u003eSingle cable carries both the existing network channels and the new HDMI-sourced channel\u003c\/li\u003e\n\u003cli\u003eSelectable modulation and FEC settings let you match the output to any DVB-T receiver network\u003c\/li\u003e\n\u003cli\u003eUSB stick included — plug in and start broadcasting local content immediately\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56563838550398,"sku":"220120","price":209.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671440441726.webp?v=1779627820"},{"product_id":"anttron-tm4hdv-hdmi-modulator","title":"Anttron TM4HDV HDMI-to-DVB Modulator – 4 HDMI Inputs, 1080p H.264 \u0026 DVB-T\/C Output","description":"\u003cp\u003eThe Anttron TM4HDV is an HDMI-to-DVB modulator that accepts four HDMI inputs — each up to 1080p — and compresses them using H.264 video encoding and AAC-LC or MPEG1-L2 audio encoding. The four encoded services are then available at the RF output on two adjacent channels in DVB-T or, after reconfiguration, in DVB-C format. This makes it possible to distribute HDMI content such as IPTV set-top boxes, cameras, or media players across a coaxial RF network to any connected TV.\u003c\/p\u003e\n\u003cp\u003eConfiguration is performed using the DTVIface programming software, which controls all DVB table parameters including programme names, SID, LCN, TSID, ONID, NID, and EIT. The unit is powered via a +5 V DC 2.1 mm connector and consumes 15 W.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4 × HDMI inputs accepting resolutions from 720p to 1080p\u003c\/li\u003e\n\u003cli\u003eH.264 video compression at 5–15 Mb\/s bitrate per input\u003c\/li\u003e\n\u003cli\u003eAudio encoding: AAC-LC or MPEG1-L2 at 128–384 Kb\/s symbol rate\u003c\/li\u003e\n\u003cli\u003eDVB-T output on 2 adjacent channels: frequency range 170–230 MHz and 470–862 MHz, output level \u0026gt;95 dBµV\u003c\/li\u003e\n\u003cli\u003eDVB-C output on 2 adjacent channels: frequency range 50–862 MHz, output level \u0026gt;95 dBµV (reconfigured from DVB-T using DTVIface)\u003c\/li\u003e\n\u003cli\u003eFull DVB table insertion: PAT, PMT, SDT, NIT, EIT\u003c\/li\u003e\n\u003cli\u003eConfiguration via DTVIface programming software over USB\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDistributes HDMI sources across an existing RF coaxial infrastructure — no HDMI cabling required at each TV point\u003c\/li\u003e\n\u003cli\u003eFour HDMI sources are encoded and multiplexed into two RF channels, maximising spectrum efficiency\u003c\/li\u003e\n\u003cli\u003eDTVIface software provides full control over service names, LCN, and DVB metadata, ensuring proper channel guide integration\u003c\/li\u003e\n\u003cli\u003eSwitchable between DVB-T and DVB-C output via software, adapting to the existing network type without hardware changes\u003c\/li\u003e\n\u003cli\u003eSuitable for both domestic and commercial installations such as hotels, offices, and hospitality venues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e TM4HDV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo inputs:\u003c\/strong\u003e 4 × HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo resolutions:\u003c\/strong\u003e 720p – 1080p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo compression:\u003c\/strong\u003e H.264, bitrate 5–15 Mb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio inputs:\u003c\/strong\u003e HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio sampling rate:\u003c\/strong\u003e 32 kHz \/ 44.1 kHz \/ 48 kHz (via HDMI)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio compression:\u003c\/strong\u003e AAC-LC \/ MPEG1-L2, symbol rate 128–384 Kb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB table insertion:\u003c\/strong\u003e PAT, PMT, SDT, NIT, EIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T output frequency:\u003c\/strong\u003e 170–230 MHz + 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T output level:\u003c\/strong\u003e \u0026gt;95 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T constellation\/FEC:\u003c\/strong\u003e QPSK \/ 16QAM \/ 64QAM — FEC 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T guard interval:\u003c\/strong\u003e 1\/4, 1\/8, 1\/16, 1\/32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T mode:\u003c\/strong\u003e 2K \/ 8K, MER 35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C output frequency:\u003c\/strong\u003e 50–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C output level:\u003c\/strong\u003e \u0026gt;95 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C constellation:\u003c\/strong\u003e 16, 32, 64, 128, 256 QAM (EN 300 429), symbol rate 4.00–6.96 Msps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower connector:\u003c\/strong\u003e DC 2.1 mm, +5 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 15 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox contents:\u003c\/strong\u003e 1 × Anttron TM4HDV, 1 × USB cable (PC connection), 1 × power supply, 1 × instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne unit handles four HDMI sources simultaneously — no need for multiple individual modulators\u003c\/li\u003e\n\u003cli\u003eContent appears on any TV connected to the RF network, including sets without HDMI inputs\u003c\/li\u003e\n\u003cli\u003eDVB-T or DVB-C mode is selected entirely in software — the hardware does not need to change\u003c\/li\u003e\n\u003cli\u003eFull DVB metadata control means channels appear correctly named with the right LCN in the TV's programme guide\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56563930825086,"sku":"220124","price":1090.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/anttron-tm4hdv-hdmi-modulator-onetrade.gif?v=1763458328"},{"product_id":"anttron-a181-wideband-catv-amplifier","title":"Anttron A181 Wideband CATV Amplifier – 21 dB Forward, 10 dB Return \u0026 GaAs-MMIC 230 VAC","description":"\u003cp\u003eThe Anttron A181 is a wideband CATV amplifier specifically designed for CATV installations handling both digital and analogue channels. Its die-cast aluminium chassis and GaAs-MMIC transistor technology combine to produce a compact unit with high linearity and efficiency, suitable for trunk and distribution applications.\u003c\/p\u003e\u003cp\u003eThe amplifier includes separate forward-path gain adjustment (0–18 dB range), slope adjustment, and return-path gain adjustment, allowing the installer to compensate for cable loss characteristics across the full frequency range. A noise figure below 7 dB maintains signal quality even at the end of a long cable run.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input, 1 output — no test output\u003c\/li\u003e\n\u003cli\u003eForward gain (85–862 MHz): 21 dB\u003c\/li\u003e\n\u003cli\u003eReturn path gain (5–65 MHz): 10 dB\u003c\/li\u003e\n\u003cli\u003eAttenuation range (forward and return path): 0–18 dB\u003c\/li\u003e\n\u003cli\u003eSlope attenuation range (forward path): 0–15 dB\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC transistor for high linearity and efficiency\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium chassis for compact, robust construction\u003c\/li\u003e\n\u003cli\u003eMains powered at 230 VAC\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSeparate forward and return path gain adjustments allow precise optimisation of both downstream and upstream signal levels in two-way CATV networks\u003c\/li\u003e\n\u003cli\u003eSlope adjustment compensates for frequency-dependent cable attenuation, ensuring flat signal response across the full forward band\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC technology delivers high maximum output level (118 dBµV) with low noise for reliable reception at the subscriber end\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium housing provides mechanical robustness and effective heat dissipation in continuous-operation installations\u003c\/li\u003e\n\u003cli\u003eLow 6 W power consumption reduces operating costs in always-on CATV head-end installations\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Outputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Output:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForward Gain (85–862 MHz):\u003c\/strong\u003e 21 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Path Gain (5–65 MHz):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation Range (forward\/return path):\u003c\/strong\u003e 0–18 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope Attenuation Range (forward path):\u003c\/strong\u003e 0–15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e \u0026lt;7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\/Output Return Loss:\u003c\/strong\u003e \u0026gt;10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Level (IM3: -52 dB, 3 equal carriers):\u003c\/strong\u003e 118 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230 VAC (-10%, +15%)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 6 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIncludes an Allen key and instruction manual for complete installation out of the box\u003c\/li\u003e\n\u003cli\u003eCompact aluminium chassis installs easily in a standard CATV head-end rack or enclosure\u003c\/li\u003e\n\u003cli\u003eThe 0–18 dB attenuation range and 0–15 dB slope adjustment provide the flexibility needed for diverse cable plant configurations\u003c\/li\u003e\n\u003cli\u003eDesigned specifically for CATV applications — not a generic amplifier — so all specifications are optimised for this use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56564315652478,"sku":"203324","price":86.45,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671571022206.webp?v=1779629625"},{"product_id":"anttron-am124-wideband-catv-amplifier","title":"Anttron AM124 Wideband CATV Amplifier – 40 dB Forward Gain, -30 dB Test Port \u0026 GaAs-MMIC","description":"\u003cp\u003eThe Anttron AM124 is a wideband CATV amplifier designed for CATV installations carrying both digital and analogue channels. Its die-cast aluminium chassis and GaAs-MMIC transistor produce a compact unit with high linearity and efficiency. The AM124 differs from the A181 model with its higher 40 dB forward gain and the addition of a -30 dB test input\/output port.\u003c\/p\u003e\u003cp\u003eThe amplifier provides separate forward-path gain adjustment, slope adjustment, and return-path gain adjustment. The attenuation range covers 0–18 dB for both paths, while the slope attenuation range on the forward path is 0–15 dB. Noise figure remains below 7 dB throughout the operating range.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 input, 1 output\u003c\/li\u003e\n\u003cli\u003eTest input\/output: yes, -30 dB\u003c\/li\u003e\n\u003cli\u003eForward gain (85–862 MHz): 40 dB\u003c\/li\u003e\n\u003cli\u003eReturn path gain (5–65 MHz): 10 dB\u003c\/li\u003e\n\u003cli\u003eAttenuation range (forward and return path): 0–18 dB\u003c\/li\u003e\n\u003cli\u003eSlope attenuation range (forward path): 0–15 dB\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC transistor for high linearity and efficiency\u003c\/li\u003e\n\u003cli\u003eDie-cast aluminium chassis for compact, robust construction\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e40 dB forward gain covers longer cable runs and larger distribution networks compared to lower-gain CATV amplifiers\u003c\/li\u003e\n\u003cli\u003eThe -30 dB test port allows signal level monitoring during installation and maintenance without interrupting service\u003c\/li\u003e\n\u003cli\u003eSeparate forward and return path gain controls enable optimisation of both downstream video and upstream data paths in two-way networks\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC technology delivers a maximum output of 118 dBµV with a noise figure below 7 dB, preserving signal quality to the subscriber\u003c\/li\u003e\n\u003cli\u003e6 W power consumption allows always-on operation with minimal energy cost\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Outputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Input\/Output:\u003c\/strong\u003e Yes, -30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eForward Gain (85–862 MHz):\u003c\/strong\u003e 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Path Gain (5–65 MHz):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation Range (forward\/return path):\u003c\/strong\u003e 0–18 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSlope Attenuation Range (forward path):\u003c\/strong\u003e 0–15 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e \u0026lt;7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput\/Output Return Loss:\u003c\/strong\u003e \u0026gt;10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Level (IM3: -52 dB, 3 equal carriers):\u003c\/strong\u003e 118 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVoltage:\u003c\/strong\u003e 230 VAC (-10%, +15%)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 6 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eIncludes an Allen key and instruction manual for a complete installation immediately out of the box\u003c\/li\u003e\n\u003cli\u003eThe compact die-cast aluminium housing installs neatly in any standard CATV rack or enclosure\u003c\/li\u003e\n\u003cli\u003eEAN: 5420037631247 — easily verified for procurement and inventory management\u003c\/li\u003e\n\u003cli\u003eConsistent 6 W consumption across all gain settings keeps energy costs predictable in long-term installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56564316373374,"sku":"203323","price":83.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671571743102.webp?v=1779629630"},{"product_id":"anttron-tmx160hd-hdmi-modulator-dvb-t-c","title":"Anttron TMX160HD HDMI to DVB-T\/C Modulator – 1080p H.264, RF Pass-Through \u0026 LCN Config","description":"\u003cp\u003eThe Anttron TMX160HD is a compact HDMI-to-DVB-T\/C modulator that takes any HDMI video source — up to 1080p — and encodes it as an H.264 compressed digital channel output on the DVB-T or DVB-C standard. The generated channel appears in the receiver's digital channel list alongside regular broadcast channels.\u003c\/p\u003e\u003cp\u003eIt includes one HDMI input, one RF pass-through input, and one RF output. Installation involves connecting the HDMI source, the RF input (or a 75-ohm terminating resistor if unused), the RF output cable, and the power supply. Channel parameters including name, SID, LCN, TSID, ONID, NID, and PIDs are fully configurable.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 HDMI input — supports resolutions 480p, 576p, 720p, 1080i, 1080p\u003c\/li\u003e\n\u003cli\u003e1 RF input for terrestrial signal pass-through\u003c\/li\u003e\n\u003cli\u003e1 RF output\u003c\/li\u003e\n\u003cli\u003eDVB-T output: 170–230 MHz and 470–862 MHz, level \u0026gt;82 dBμV\u003c\/li\u003e\n\u003cli\u003eDVB-C output: 47–862 MHz, level \u0026gt;82 dBμV\u003c\/li\u003e\n\u003cli\u003eVideo compression: H.264 at 5–15 Mb\/s bitrate\u003c\/li\u003e\n\u003cli\u003eAudio compression: AAC-LC \/ MPEG1-L2 at 128–384 Kb\/s\u003c\/li\u003e\n\u003cli\u003eFull DVB table insertion: PAT, PMT, SDT, NIT\u003c\/li\u003e\n\u003cli\u003eConfigurable channel\/network name, SID, LCN, TSID, ONID, NID, audio and video PIDs\u003c\/li\u003e\n\u003cli\u003ePower: +5V DC via 2.1 mm connector\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eConverts any HDMI source (media player, laptop, Blu-ray, streaming device) into a distributable TV channel — no additional set-top boxes needed at each screen\u003c\/li\u003e\n\u003cli\u003eRF pass-through input preserves the existing aerial\/cable signal alongside the modulated HDMI channel\u003c\/li\u003e\n\u003cli\u003eDVB-T and DVB-C compatibility covers both terrestrial and cable distribution networks\u003c\/li\u003e\n\u003cli\u003eFull DVB metadata configuration (LCN, channel name, PIDs) allows the channel to appear correctly labelled on any DVB-compliant receiver\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Anttron TMX160HD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo input:\u003c\/strong\u003e HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSupported resolutions:\u003c\/strong\u003e 480p, 576p, 720p, 1080i, 1080p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo compression:\u003c\/strong\u003e H.264, bitrate 5–15 Mb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio input:\u003c\/strong\u003e HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio sample rate:\u003c\/strong\u003e 32 kHz \/ 44.1 kHz \/ 48 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio compression:\u003c\/strong\u003e AAC-LC \/ MPEG1-L2, bitrate 128–384 Kb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB table insertion:\u003c\/strong\u003e PAT, PMT, SDT, NIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T output frequency:\u003c\/strong\u003e 170–230 MHz + 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T output level:\u003c\/strong\u003e \u0026gt;82 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T constellation – FEC:\u003c\/strong\u003e QPSK\/16QAM\/64QAM – 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T guard interval:\u003c\/strong\u003e 1\/4, 1\/8, 1\/16, 1\/32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T mode – MER:\u003c\/strong\u003e 2K\/8K – 31 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C output frequency:\u003c\/strong\u003e 47–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C output level:\u003c\/strong\u003e \u0026gt;82 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C constellation – MER:\u003c\/strong\u003e QAM16, 32, 64, 128, 256 \/ MER \u0026gt;40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower connector:\u003c\/strong\u003e DC 2.1 mm, +5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 10 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAny HDMI device can be distributed to every TV on the building's coaxial network without additional cabling\u003c\/li\u003e\n\u003cli\u003eThe RF pass-through preserves existing broadcast TV channels so no channel is displaced\u003c\/li\u003e\n\u003cli\u003eFull LCN and channel-name configuration means the modulated channel integrates neatly into the on-screen channel guide\u003c\/li\u003e\n\u003cli\u003eCompatible with both DVB-T (aerial) and DVB-C (cable) networks, so it works in diverse installation scenarios\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56564413563262,"sku":"220130","price":134.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671613620606.webp?v=1779630017"},{"product_id":"anttron-r835-3-way-splitter","title":"Anttron R835 3-Way Indoor Coaxial Splitter – 5-2300 MHz, DC Pass \u0026 20 dB Isolation","description":"\u003cp\u003eThe Anttron R835 is a 3-way passive indoor splitter designed for splitting TV and satellite coaxial signals. It supports the 5–2300 MHz frequency range, covering both terrestrial and satellite IF bands, and passes DC power on all three ports through diode protection.\u003c\/p\u003e\u003cp\u003eThe unit uses F-type connectors and is built for low insertion loss performance in indoor distribution installations.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3 outputs\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003eF-type connectors on all ports\u003c\/li\u003e\n\u003cli\u003eDC power pass on all three ports (diode protection)\u003c\/li\u003e\n\u003cli\u003eTerrestrial (TERR) branch loss: 9 dB\u003c\/li\u003e\n\u003cli\u003eSatellite (SAT) branch loss: 11 dB\u003c\/li\u003e\n\u003cli\u003eIsolation between outputs: 20 dB\u003c\/li\u003e\n\u003cli\u003eLow insertion loss design\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDC pass on all three output ports allows LNB or amplifier power to be fed through any output without additional DC injectors\u003c\/li\u003e\n\u003cli\u003eDiode protection prevents DC short-circuit between outputs if multiple DC sources are connected\u003c\/li\u003e\n\u003cli\u003eF-type connectors ensure a secure, weatherproof signal connection compatible with standard coaxial cabling\u003c\/li\u003e\n\u003cli\u003e20 dB isolation between outputs prevents signal from one receiver interfering with the others\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Anttron R835\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of outputs:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector type:\u003c\/strong\u003e F-type\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranch loss – TERR:\u003c\/strong\u003e 9 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranch loss – SAT:\u003c\/strong\u003e 11 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation between outputs:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC power pass (outputs\/inputs):\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC protection:\u003c\/strong\u003e Diode\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDC pass on all ports means no separate power injector is needed when powering a dish LNB through the splitter\u003c\/li\u003e\n\u003cli\u003eThe 5–2300 MHz range handles both UHF TV and full satellite IF in one unit\u003c\/li\u003e\n\u003cli\u003eF-type connectors make installation straightforward with standard RG-6 coaxial cables\u003c\/li\u003e\n\u003cli\u003eCompact indoor form factor fits neatly behind a TV cabinet or in a signal distribution point\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56564427817342,"sku":"204131","price":3.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671620960638.webp?v=1779630056"},{"product_id":"anttron-r865-6-way-splitter","title":"Anttron R865 6-Way Indoor Coaxial Splitter – 5-2300 MHz, DC Pass \u0026 20 dB Isolation","description":"\u003cp\u003eThe Anttron R865 is a 6-way passive indoor splitter designed for distributing antenna and satellite IF signals throughout a property. It covers the full hybrid TERR\/SAT frequency range from 5 to 2300 MHz, making it compatible with both terrestrial and satellite distribution systems in a single unit.\u003c\/p\u003e\u003cp\u003eAll six output ports carry DC pass capability with diode protection, which allows connected equipment or line amplifiers to be powered directly through the coaxial cable. F-type connectors on all ports ensure secure, low-loss connections.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e6-way signal distribution from a single input\u003c\/li\u003e\n\u003cli\u003eFrequency range: 5–2300 MHz (TERR and SAT compatible)\u003c\/li\u003e\n\u003cli\u003eDC power pass on all 6 outputs with diode protection\u003c\/li\u003e\n\u003cli\u003eF-type connectors on all ports\u003c\/li\u003e\n\u003cli\u003eLow insertion loss design\u003c\/li\u003e\n\u003cli\u003e20 dB port-to-port isolation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle unit handles both terrestrial and satellite distribution, eliminating the need for separate splitters\u003c\/li\u003e\n\u003cli\u003eDC pass on every port allows powered devices to operate without breaking the DC path at any outlet\u003c\/li\u003e\n\u003cli\u003eDiode protection prevents damage if DC is inadvertently applied to more than one port\u003c\/li\u003e\n\u003cli\u003eF-type connectors provide secure, weatherproof-grade connections that resist loosening over time\u003c\/li\u003e\n\u003cli\u003eLow insertion loss preserves signal quality at each of the six outputs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency Range:\u003c\/strong\u003e 5–2300 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation:\u003c\/strong\u003e 20 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBranch Loss:\u003c\/strong\u003e 12 dB (TERR) \/ 15 dB (SAT)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDC Power Pass (out\/in):\u003c\/strong\u003e 6\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConnector Type:\u003c\/strong\u003e F-type\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCovers the complete TERR and SAT spectrum in one compact housing, simplifying installation\u003c\/li\u003e\n\u003cli\u003eSix fully DC-passing ports give maximum flexibility for placement in any distribution topology\u003c\/li\u003e\n\u003cli\u003eIndoor-rated build suits in-wall, cabinet, or equipment-room mounting\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56564439744894,"sku":"204133","price":8.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671627317630.webp?v=1779630072"},{"product_id":"anttron-am340lte-multiband-amplifier-5g","title":"Anttron AM340LTE 3-Input Multiband TV Amplifier – 40 dB UHF, 5G LTE Filter \u0026 GaAs-MMIC","description":"\u003cp\u003eThe Anttron AM340LTE is a central-installation multiband amplifier designed for the distribution of digital and analogue television signals in apartment blocks and commercial buildings. It accepts three separate inputs — BI+FM, Band III (DAB), and UHF — and combines them into a single output with independently adjustable attenuation (0–18 dB) per input, allowing installers to balance signal levels from different sources.\u003c\/p\u003e\u003cp\u003eThe amplifier is built around GaAs-MMIC transistor technology, which delivers high linearity and efficiency from a compact aluminium die-cast chassis. A built-in 5G LTE filter on the UHF input suppresses mobile interference without requiring an external filter. A test output (−30 dB) and front-mounted attenuators simplify commissioning and fine-tuning. The UHF input also carries a 12V\/200mA remote power supply for a mast-head preamplifier.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e3 inputs: BI+FM, Band III (DAB), UHF\u003c\/li\u003e\n\u003cli\u003e1 output with test output at −30 dB\u003c\/li\u003e\n\u003cli\u003eBuilt-in 5G LTE filter on UHF input\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC transistor technology for high linearity\u003c\/li\u003e\n\u003cli\u003eAluminium die-cast chassis\u003c\/li\u003e\n\u003cli\u003eAttenuation range per input: 0–18 dB\u003c\/li\u003e\n\u003cli\u003eRemote power supply for preamplifier: 12V \/ 200mA (UHF input only, selectable)\u003c\/li\u003e\n\u003cli\u003eMains voltage: 230Vac (−10%, +15%)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eThree independent inputs let installers combine aerial, DAB, and FM sources into a single cable run\u003c\/li\u003e\n\u003cli\u003ePer-input attenuation (0–18 dB) balances unequal signal levels without external pads\u003c\/li\u003e\n\u003cli\u003eGaAs-MMIC technology gives high output levels and low noise in a small enclosure\u003c\/li\u003e\n\u003cli\u003eBuilt-in LTE filter eliminates 5G interference on the UHF path without an additional accessory\u003c\/li\u003e\n\u003cli\u003eTest output at −30 dB allows signal-level monitoring without interrupting the main distribution\u003c\/li\u003e\n\u003cli\u003eRemote 12V power on the UHF input drives a mast-head preamplifier from the same coaxial cable\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Inputs:\u003c\/strong\u003e 3\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNumber of Outputs:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTest Output:\u003c\/strong\u003e −30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain BI+FM Input:\u003c\/strong\u003e 24 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain Band III (DAB) Input:\u003c\/strong\u003e 33 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGain UHF Input:\u003c\/strong\u003e 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAttenuation Range (each input):\u003c\/strong\u003e 0–18 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNoise Figure:\u003c\/strong\u003e \u0026lt; 7 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. Output Level (DIN45004B):\u003c\/strong\u003e 120 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote Power Supply for Preamplifier:\u003c\/strong\u003e 12V \/ 200mA selectable (UHF input only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMains Voltage:\u003c\/strong\u003e 230Vac (−10%, +15%)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 6 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eChassis:\u003c\/strong\u003e Aluminium die-cast\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTransistor Technology:\u003c\/strong\u003e GaAs-MMIC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the Box:\u003c\/strong\u003e AM340LTE amplifier, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAll three signal bands — aerial UHF, DAB, and FM — are combined in one box, reducing installation hardware\u003c\/li\u003e\n\u003cli\u003eThe built-in LTE filter means one less component to source and install for 5G-compliant distributions\u003c\/li\u003e\n\u003cli\u003eFront-panel attenuators make level adjustment quick without opening the enclosure\u003c\/li\u003e\n\u003cli\u003eLow 6W power consumption keeps running costs minimal in always-on central distribution systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56577289355646,"sku":"203326","price":89.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674564411774.webp?v=1779631188"},{"product_id":"anttron-tmx170hd-hdmi-modulator-dvb-t-c","title":"Anttron TMX170HD HDMI to DVB-T\/C Modulator – 1080p, HDMI Loop \u0026 RF Bypass","description":"\u003cp\u003eThe Anttron TMX170HD is a compact HDMI-to-DVB-T\/C modulator that allows any HDMI-equipped device — such as a Blu-ray player, gaming console or streaming box — to be watched on every TV in a building via the existing coaxial cable infrastructure. The output channel appears alongside regular digital terrestrial channels in the TV's channel list, with resolutions up to 1080p.\u003c\/p\u003e\u003cp\u003eAn HDMI loop output keeps the source signal available for a directly connected display at the same time. The device is controlled through a 3-button menu with a 2×16 character LCD, and includes RF Bypass so the coaxial network continues to carry other channels uninterrupted.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eConverts HDMI input to DVB-T or DVB-C RF output, ready for distribution over coaxial cable\u003c\/li\u003e\n\u003cli\u003eSupports resolutions up to 1080p (480p, 576p, 720p, 1080i, 1080p)\u003c\/li\u003e\n\u003cli\u003eHDMI loop output keeps the source connected to a local display simultaneously\u003c\/li\u003e\n\u003cli\u003eRF Bypass for uninterrupted pass-through of existing coaxial signals\u003c\/li\u003e\n\u003cli\u003e3-button control with 2×16 character LCD for on-device configuration\u003c\/li\u003e\n\u003cli\u003eFull SI table insertion: PAT, PMT, SDT, NIT\u003c\/li\u003e\n\u003cli\u003eConfigurable channel\/network name, SID, LCN, TSID, ONID, NID, audio and video PIDs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDistributes any HDMI source to every TV on the coaxial network — no rewiring required\u003c\/li\u003e\n\u003cli\u003eHDMI loop eliminates the need to switch cables on the source device\u003c\/li\u003e\n\u003cli\u003eRF Bypass ensures existing antenna signals reach all TVs without interruption\u003c\/li\u003e\n\u003cli\u003eFull SI table configuration allows proper integration into digital channel listings including LCN ordering\u003c\/li\u003e\n\u003cli\u003eH.264 video compression at selectable bitrates (5–15 Mb\/s) balances quality and bandwidth\u003c\/li\u003e\n\u003cli\u003eAAC-LC \/ MPEG1-L2 audio at 128–384 Kb\/s with HDMI sample rate support (32, 44.1, 48 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Anttron TMX170HD \/ MPN: TMX170HD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Input:\u003c\/strong\u003e HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution Modes:\u003c\/strong\u003e 480p, 576p, 720p, 1080i, 1080p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Compression:\u003c\/strong\u003e H.264 — bitrate 5–15 Mb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Input:\u003c\/strong\u003e HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Sample Rate:\u003c\/strong\u003e 32kHz \/ 44.1kHz \/ 48kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Compression:\u003c\/strong\u003e AAC-LC \/ MPEG1-L2 — bitrate 128–384 Kb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSI Tables:\u003c\/strong\u003e PAT, PMT, SDT, NIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e DVB-T\/C RF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Frequency \/ Level:\u003c\/strong\u003e 170–230 MHz + 470–862 MHz \/ \u0026gt;85 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstellation \/ FEC:\u003c\/strong\u003e QPSK\/16QAM\/64QAM — 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuard Interval:\u003c\/strong\u003e 1\/4, 1\/8, 1\/16, 1\/32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode \/ MER:\u003c\/strong\u003e 2K\/8K — 34 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Connector:\u003c\/strong\u003e DC 2.1mm — +5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 5 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAdd any HDMI device to every TV in the building using cables already in the walls\u003c\/li\u003e\n\u003cli\u003eHDMI loop means the primary display in the room loses nothing\u003c\/li\u003e\n\u003cli\u003eSimple 3-button menu makes installation and channel setup manageable without a laptop\u003c\/li\u003e\n\u003cli\u003eIncludes power supply and instruction manual — ready to install out of the box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56577811743102,"sku":"220131","price":159.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674779271550.webp?v=1779632671"},{"product_id":"anttron-tmx4kl-hdmi-modulator-dvb-t-c","title":"Anttron TMX4KL HDMI to DVB-T\/C Modulator – 4K HDMI Loop, 1080p Encode \u0026 RF Bypass","description":"\u003cp\u003eThe Anttron TMX4KL is a compact HDMI-to-DVB-T\/C modulator that allows any HDMI-equipped device to be watched on every TV in a building via the existing coaxial cable infrastructure. The output channel appears alongside regular digital terrestrial channels in the TV's channel list, with modulated resolutions up to 1080p. Unlike the standard TMX170HD, the TMX4KL includes a 4K-capable HDMI loop output, preserving the source signal at full 4K resolution for a directly connected display.\u003c\/p\u003e\u003cp\u003eRF Bypass ensures existing antenna signals pass through uninterrupted. The device is configured through a 3-button menu with a 2×16 character LCD, with full SI table insertion and detailed channel parameter control.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eConverts HDMI input to DVB-T or DVB-C RF output for distribution over coaxial cable\u003c\/li\u003e\n\u003cli\u003eModulated output up to 1080p (480p, 576p, 720p, 1080i, 1080p)\u003c\/li\u003e\n\u003cli\u003e4K HDMI loop output — passes the source signal at 4K resolution to a local display\u003c\/li\u003e\n\u003cli\u003eRF Bypass for uninterrupted pass-through of existing coaxial signals\u003c\/li\u003e\n\u003cli\u003e3-button control with 2×16 character LCD for on-device configuration\u003c\/li\u003e\n\u003cli\u003eFull SI table insertion: PAT, PMT, SDT, NIT\u003c\/li\u003e\n\u003cli\u003eConfigurable channel\/network name, SID, LCN, TSID, ONID, NID, audio and video PIDs\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDistributes any HDMI source to every TV on the coaxial network without new cabling\u003c\/li\u003e\n\u003cli\u003e4K HDMI loop means the primary display retains full 4K resolution — nothing is downscaled locally\u003c\/li\u003e\n\u003cli\u003eRF Bypass keeps all existing antenna channels available on the network simultaneously\u003c\/li\u003e\n\u003cli\u003eFull SI table configuration enables proper LCN ordering in digital channel lists\u003c\/li\u003e\n\u003cli\u003eH.264 video compression at 5–15 Mb\/s balances picture quality with coaxial bandwidth\u003c\/li\u003e\n\u003cli\u003eAAC-LC \/ MPEG1-L2 audio at 128–384 Kb\/s with HDMI sample rate support (32, 44.1, 48 kHz)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Anttron TMX4KL \/ MPN: TMX4KL\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Input:\u003c\/strong\u003e HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eResolution Modes (modulated output):\u003c\/strong\u003e 480p, 576p, 720p, 1080i, 1080p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI Loop Resolution:\u003c\/strong\u003e 4K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Compression:\u003c\/strong\u003e H.264 — bitrate 5–15 Mb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Input:\u003c\/strong\u003e HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Sample Rate:\u003c\/strong\u003e 32kHz \/ 44.1kHz \/ 48kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Compression:\u003c\/strong\u003e AAC-LC \/ MPEG1-L2 — bitrate 128–384 Kb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSI Tables:\u003c\/strong\u003e PAT, PMT, SDT, NIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput:\u003c\/strong\u003e DVB-T\/C RF\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Frequency \/ Level:\u003c\/strong\u003e 170–230 MHz + 470–862 MHz \/ \u0026gt;85 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConstellation \/ FEC:\u003c\/strong\u003e QPSK\/16QAM\/64QAM — 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eGuard Interval:\u003c\/strong\u003e 1\/4, 1\/8, 1\/16, 1\/32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMode \/ MER:\u003c\/strong\u003e 2K\/8K — 34 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Connector:\u003c\/strong\u003e DC 2.1mm — +5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 5 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4K HDMI loop means the room's primary display gets the full 4K feed while other TVs share the HD distribution\u003c\/li\u003e\n\u003cli\u003eUses the existing coaxial infrastructure — no new cabling or drilling required\u003c\/li\u003e\n\u003cli\u003eSimple 3-button LCD menu allows full channel configuration without a PC\u003c\/li\u003e\n\u003cli\u003eIncludes power supply and instruction manual — complete and ready to install\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56577814561150,"sku":"220132","price":197.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674780942718.webp?v=1779632689"},{"product_id":"anttron-trm84-compact-headend","title":"Anttron TRM84 Digital Compact Headend – 4 SAT In, 4 DVB-T\/C Out \u0026 LCN with Web Admin","description":"\u003cp\u003eThe Anttron TRM84 is a digital compact headend that transmodulates free-to-air (FTA) satellite programs from up to 8 DVB-S\/S2 transponders across 4 SAT inputs into 4 adjacent DVB-T or DVB-C output channels. The integrated remultiplexer allows programs from any of the 8 transponders to be freely assigned to any of the 4 output MUX, giving installers precise control over which channels appear at each distribution point.\u003c\/p\u003e\n\u003cp\u003eThe TRM84 is designed for cost-effective satellite channel distribution in existing coaxial networks — hotels, hospitals, nursing homes, and similar multi-room installations. It supports LCN (Logical Channel Numbering) and remote administration via web interface over Ethernet or LAN.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4 SAT inputs covering 8 DVB-S\/S2 transponders\u003c\/li\u003e\n\u003cli\u003e4 adjacent DVB-T or DVB-C output channels (MUX)\u003c\/li\u003e\n\u003cli\u003eIntegrated remultiplexer for free assignment of satellite programs to output MUX\u003c\/li\u003e\n\u003cli\u003eLCN (Logical Channel Numbering) support\u003c\/li\u003e\n\u003cli\u003eUSB input for programming via PC\u003c\/li\u003e\n\u003cli\u003eRJ45 port for LAN programming and remote web-based administration\u003c\/li\u003e\n\u003cli\u003eAdjacent-channel-capable modulators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eConverts satellite channels for distribution over existing coaxial infrastructure — no new cabling required\u003c\/li\u003e\n\u003cli\u003eRemultiplexer lets the operator select exactly which satellite programs reach each output MUX\u003c\/li\u003e\n\u003cli\u003eWeb-based remote management reduces the need for on-site visits after initial setup\u003c\/li\u003e\n\u003cli\u003eFour adjacent output channels maximise the number of programs distributed within a tight frequency plan\u003c\/li\u003e\n\u003cli\u003eLCN support ensures TV sets display channels in the correct numbered order without manual retuning\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Anttron TRM84\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT inputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceivable transponders:\u003c\/strong\u003e 8 DVB-S\/S2\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT frequency range:\u003c\/strong\u003e 950 ... 2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT input level:\u003c\/strong\u003e -65 ... -25 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB supply:\u003c\/strong\u003e 13\/18 V \/ 22 kHz \/ DiSEqC, 300 mA per input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT demodulation:\u003c\/strong\u003e QPSK \/ 8PSK, 1 ... 45 Msps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T output frequency:\u003c\/strong\u003e 170 ... 230 MHz + 470 ... 862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T modulation:\u003c\/strong\u003e 2k \/ QPSK \/ 16 QAM \/ 64 QAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T MER:\u003c\/strong\u003e \u0026gt;35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C output frequency:\u003c\/strong\u003e 50 ... 862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C modulation:\u003c\/strong\u003e 16\/32\/64\/128\/256 QAM (EN 300 429)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C symbol rate:\u003c\/strong\u003e 4 ... 6.96 Mbps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C MER:\u003c\/strong\u003e \u0026gt;39 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e \u0026gt;90 dBuV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level adjustment:\u003c\/strong\u003e -1 ... -20 dB (software)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRemote administration:\u003c\/strong\u003e Web-control\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 100–240 VAC \/ 50–60 Hz \/ \u0026lt;25 W\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e 1× Anttron TRM84 Compact Headend, 1× instruction manual, 1× mains cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSingle compact unit handles both reception and modulation — no separate components needed\u003c\/li\u003e\n\u003cli\u003eWorks over existing coaxial cabling in hotels and multi-unit buildings, protecting prior infrastructure investment\u003c\/li\u003e\n\u003cli\u003eWeb control panel lets you manage the headend from any device on the local network\u003c\/li\u003e\n\u003cli\u003eAdjustable output level compensates for different cable run lengths in the distribution network\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56577936785790,"sku":"221146","price":1599.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674841989502.webp?v=1779633523"},{"product_id":"anttron-trm94-compact-headend","title":"Anttron TRM94 Compact Headend Transmodulator – 4× DVB-S\/S2\/S2X to DVB-T\/C, HDMI \u0026 USB Info","description":"\u003cp\u003eThe Anttron TRM94 is a digital compact headend that transmodulates free-to-air satellite programs from 8 DVB-S\/S2\/S2X transponders across 4 SAT inputs into 4 adjacent DVB-T (COFDM) or DVB-C output channels. An integrated remultiplexer allows programs from any transponder to be freely assigned to any of the 4 output MUX, giving installers full control over the channel lineup at each distribution point.\u003c\/p\u003e\n\u003cp\u003eIn addition to satellite transmodulation, the TRM94 can generate its own TV program using a USB port: *.ts video files played from a USB stick can be output as an independent info channel or as a timed replacement for a satellite program. The HDMI input can be used as an alternative or supplement to USB playback. A timer function controls the playback schedule. The TRM94 is the cost-effective solution for distributing satellite channels and one INFO channel over existing coaxial infrastructure in hotels, hospitals, nursing homes, and similar facilities.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e4 SAT inputs supporting 8 DVB-S\/S2\/S2X transponders\u003c\/li\u003e\n\u003cli\u003eHDMI input for live source or info-channel generation\u003c\/li\u003e\n\u003cli\u003eUSB port for *.ts video file playback as an independent info channel\u003c\/li\u003e\n\u003cli\u003e4 adjacent DVB-T or DVB-C output channels (MUX)\u003c\/li\u003e\n\u003cli\u003eIntegrated remultiplexer with LCN support\u003c\/li\u003e\n\u003cli\u003e1× USB-B port for PC programming\u003c\/li\u003e\n\u003cli\u003eEthernet port for remote maintenance via DTV KEY access key\u003c\/li\u003e\n\u003cli\u003eAdjacent-channel-capable modulators\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDVB-S2X demodulation supports the widest range of current satellite transmission modes\u003c\/li\u003e\n\u003cli\u003eHDMI and USB inputs allow a custom info channel without additional hardware\u003c\/li\u003e\n\u003cli\u003eTimer-controlled playback lets the operator schedule the info channel automatically\u003c\/li\u003e\n\u003cli\u003eWeb-based remote maintenance reduces on-site visits after initial installation\u003c\/li\u003e\n\u003cli\u003eWorks over existing coaxial distribution networks — no new cabling required\u003c\/li\u003e\n\u003cli\u003eLCN support ensures correct channel numbering on all connected TV sets\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Anttron TRM94\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT inputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReceivable transponders:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT frequency range:\u003c\/strong\u003e 950 ... 2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT input level:\u003c\/strong\u003e 38 ... 103 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB supply voltage:\u003c\/strong\u003e 13\/18 V, 22 kHz \/ DiSEqC (max. 300 mA per input)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-S demodulation:\u003c\/strong\u003e QPSK, symbol rate 1 ... 45 MS\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-S2 demodulation:\u003c\/strong\u003e QPSK, 8PSK, 16APSK, 32APSK, CCM, ACM, VCM, single\/multiple transport stream, GSE, symbol rate 1 ... 45 MS\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-S2X demodulation:\u003c\/strong\u003e QPSK, 8PSK, 8APSK-L, 16APSK, 16APSK-L, 32APSK, 32APSK-L, 64APSK, 64APSK-L\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHDMI input:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB input:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUSB-B port:\u003c\/strong\u003e 1× (PC programming)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEthernet:\u003c\/strong\u003e 1× (remote maintenance via DTV KEY)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T\/DVB-C output:\u003c\/strong\u003e 4 adjacent channels (MUX)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput frequency range:\u003c\/strong\u003e 47 ... 862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e max. 95 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLevel control:\u003c\/strong\u003e 0 ... -20 dB (PC software)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLoop-through attenuation:\u003c\/strong\u003e \u0026lt;2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T constellation:\u003c\/strong\u003e 16 QAM \/ 64 QAM \/ QPSK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T FEC:\u003c\/strong\u003e 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T guard interval:\u003c\/strong\u003e 1\/4, 1\/8, 1\/16, 1\/32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T mode:\u003c\/strong\u003e 2K\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C constellation:\u003c\/strong\u003e 16\/32\/64\/128 QAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMER:\u003c\/strong\u003e DVB-T \u0026gt;35 dB, DVB-C \u0026gt;39 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLCN:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 90 ... 264 V AC – 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDimensions (W×H×D):\u003c\/strong\u003e 119 × 133 × 196 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWeight:\u003c\/strong\u003e 1.5 kg\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage contents:\u003c\/strong\u003e 1× Anttron TRM94 Compact Headend, 1× instruction manual, 1× mains cable\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDVB-S2X support future-proofs the headend for advanced satellite platforms\u003c\/li\u003e\n\u003cli\u003eHDMI and USB info-channel capability adds a custom channel without extra equipment\u003c\/li\u003e\n\u003cli\u003eCompact form factor (119 × 133 × 196 mm, 1.5 kg) installs easily in a rack or equipment cabinet\u003c\/li\u003e\n\u003cli\u003eWide power supply range (90–264 V AC) accommodates varying mains conditions\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56578046820734,"sku":"221147","price":1690.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674884424062.webp?v=1779633632"},{"product_id":"anttron-trm98-compact-headend","title":"Anttron TRM98 Digital Compact Headend – 8× DVB-S\/S2\/S2X to 8× DVB-T\/C MUX \u0026 BISS","description":"\u003cp\u003eThe Anttron TRM98 is a digital compact headend designed for distributing satellite television through existing coaxial networks in hotels, hospitals, campsites, and similar multi-room installations. It accepts 4 satellite signal inputs covering 8 tunable transponders and converts them into up to 8 contiguous digital terrestrial or cable MUXes.\u003c\/p\u003e\u003cp\u003eAn integrated remultiplexer allows free assignment of programs from any of the 8 satellite transponders to any of the 8 output MUXes. BISS decryption is included. The unit can be programmed locally via USB and the free DTV Iface software, or remotely via Ethernet using a DTV KEY access key.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e4 SAT inputs supporting 8 tunable transponders\u003c\/li\u003e\n\u003cli\u003eDVB-S2X Multistream support (CCM \/ ACM \/ VCM \/ 16APSK \/ 32APSK) on the first 4 transponders (A, B, C, D)\u003c\/li\u003e\n\u003cli\u003eDiSEqC control (13\/18 V, 22 kHz) per individual input, 300 mA each\u003c\/li\u003e\n\u003cli\u003eSelectable DVB-T or DVB-C output configuration on eight contiguous channels\u003c\/li\u003e\n\u003cli\u003eIntegrated remultiplexer for free program assignment across MUXes\u003c\/li\u003e\n\u003cli\u003eBISS decoding\u003c\/li\u003e\n\u003cli\u003eLCN (Logical Channel Numbering) support\u003c\/li\u003e\n\u003cli\u003eUSB port for local programming via free DTV Iface software\u003c\/li\u003e\n\u003cli\u003eEthernet port for remote programming with DTV KEY access key\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eConverts satellite content to DVB-T or DVB-C for distribution over an existing coaxial network — no need to replace infrastructure\u003c\/li\u003e\n\u003cli\u003eRemultiplexer gives operators full flexibility to allocate channels across output MUXes\u003c\/li\u003e\n\u003cli\u003eBISS decryption enables reception of encrypted transponders without separate conditional access modules\u003c\/li\u003e\n\u003cli\u003eRemote management via Ethernet reduces the need for on-site maintenance visits\u003c\/li\u003e\n\u003cli\u003eDVB-S2X Multistream capability future-proofs the installation for high-efficiency satellite feeds\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eSAT inputs:\u003c\/strong\u003e 4\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTunable transponders:\u003c\/strong\u003e 8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput frequency range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput level:\u003c\/strong\u003e -65 to -25 dBm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB power supply:\u003c\/strong\u003e 13\/18 V \/ 22 kHz \/ DiSEqC, 300 mA per input\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInput modulation:\u003c\/strong\u003e QPSK \/ 8PSK, 1–45 Msps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMultistream:\u003c\/strong\u003e CCM \/ ACM \/ VCM \/ 16APSK \/ 32APSK\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T output frequency:\u003c\/strong\u003e 170–230 MHz + 470–862 MHz (eight contiguous channels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T modulation:\u003c\/strong\u003e 2k \/ QPSK \/ 16 QAM \/ 64 QAM\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T MER:\u003c\/strong\u003e \u0026gt;35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C output frequency:\u003c\/strong\u003e 50–862 MHz (eight contiguous channels)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C modulation:\u003c\/strong\u003e 16 \/ 32 \/ 64 \/ 128 \/ 256 QAM (EN 300 429)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C symbol rate:\u003c\/strong\u003e 4–6.96 Mb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C MER:\u003c\/strong\u003e \u0026gt;39 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level:\u003c\/strong\u003e \u0026gt;90 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level adjustment:\u003c\/strong\u003e -1 to -20 dB (SW)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e 100–240 V \/ 50–60 Hz \/ \u0026lt;25 W\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompact headend format integrates all conversion and remultiplexing in a single unit, simplifying rack installations\u003c\/li\u003e\n\u003cli\u003eFree DTV Iface software eliminates recurring licensing costs for local programming\u003c\/li\u003e\n\u003cli\u003eWeb-control remote management option allows configuration from any browser on the network\u003c\/li\u003e\n\u003cli\u003eSuitable for hotels, hospitals, campsites, and any facility requiring centralised satellite-to-terrestrial conversion\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56578788655486,"sku":"221150","price":1999.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675146076542.webp?v=1779635454"},{"product_id":"anttron-tmz160hd-hdmi-modulator-convert-hdmi-to-dvb-t-c-1080","title":"Anttron TMZ160HD HDMI to DVB-T\/C Modulator – H.264, 1080p \u0026 47-862 MHz RF Output","description":"\u003cp\u003eThe Anttron TMZ160HD accepts any HDMI source — set-top box, media player, camera, or computer — and re-encodes it as an H.264-compressed DVB-T or DVB-C channel, making it accessible on all connected TV sets without additional receivers. The modulated channel appears in the digital terrestrial channel list alongside broadcast channels.\u003c\/p\u003e\u003cp\u003eVideo resolutions up to 1080p are supported. An RF input allows terrestrial signals to pass through alongside the modulated channel. An OLED display and joystick provide on-unit parameter configuration. The package includes a power supply and instruction manual.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e1 HDMI input, supporting all resolutions up to 1080p (480p, 576p, 720p, 1080i, 1080p)\u003c\/li\u003e\n\u003cli\u003e1 RF input for terrestrial signal bypass\u003c\/li\u003e\n\u003cli\u003e1 RF output\u003c\/li\u003e\n\u003cli\u003eDVB-T output: 170–230 MHz and 470–862 MHz, output level greater than 82 dBµV\u003c\/li\u003e\n\u003cli\u003eDVB-C output: 47–862 MHz, output level greater than 82 dBµV\u003c\/li\u003e\n\u003cli\u003eVideo compression: H.264, bitrate 5–15 Mb\/s\u003c\/li\u003e\n\u003cli\u003eAudio compression: AAC-LC \/ MPEG1-L2, bitrate 128–384 Kb\/s\u003c\/li\u003e\n\u003cli\u003eOLED display with joystick for parameter configuration\u003c\/li\u003e\n\u003cli\u003eDVB table insertion: PAT, PMT, SDT, NIT\u003c\/li\u003e\n\u003cli\u003ePower consumption: 4 Watts\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eAny HDMI device can be watched on all TVs connected to the coaxial network — no need for additional receivers or HDMI splitters per room\u003c\/li\u003e\n\u003cli\u003eH.264 encoding at up to 1080p preserves HD image quality through the coaxial distribution\u003c\/li\u003e\n\u003cli\u003eDVB-T and DVB-C output modes cover both terrestrial and cable coaxial network infrastructure in a single unit\u003c\/li\u003e\n\u003cli\u003eHDMI audio at 32 kHz, 44.1 kHz, and 48 kHz sample rates is preserved through the modulation chain\u003c\/li\u003e\n\u003cli\u003eThe RF bypass input keeps existing broadcast channels available on all TVs alongside the modulated HDMI channel\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e TMZ160HD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Input:\u003c\/strong\u003e HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Resolutions:\u003c\/strong\u003e 480p, 576p, 720p, 1080i, 1080p\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVideo Compression:\u003c\/strong\u003e H.264, bitrate 5–15 Mb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Input:\u003c\/strong\u003e HDMI\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Sample Rate:\u003c\/strong\u003e 32 kHz \/ 44.1 kHz \/ 48 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAudio Compression:\u003c\/strong\u003e AAC-LC \/ MPEG1-L2, bitrate 128–384 Kb\/s\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T Output Frequency:\u003c\/strong\u003e 170–230 MHz + 470–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T Output Level:\u003c\/strong\u003e greater than 82 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T Constellation \/ FEC:\u003c\/strong\u003e QPSK\/16QAM\/64QAM, 1\/2, 2\/3, 3\/4, 5\/6, 7\/8\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T Guard Interval:\u003c\/strong\u003e 1\/4, 1\/8, 1\/16, 1\/32\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-T Mode \/ MER:\u003c\/strong\u003e 2K\/8K, 31 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C Output Frequency:\u003c\/strong\u003e 47–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C Output Level:\u003c\/strong\u003e greater than 82 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB-C Constellation \/ MER:\u003c\/strong\u003e QAM16, 32, 64, 128, 256 \/ MER greater than 40 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDVB Table Insertion:\u003c\/strong\u003e PAT, PMT, SDT, NIT\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eConfigurable Parameters:\u003c\/strong\u003e Channel\/network name, SID, LCN, TSID, ONID, NID, versions, audio\/video PIDs\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Connector:\u003c\/strong\u003e DC 2.1mm, +5V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Consumption:\u003c\/strong\u003e 4 Watts\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDisplay:\u003c\/strong\u003e OLED with joystick\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA single modulator delivers an HDMI source to every TV on the coaxial network — ideal for hotels, offices, hospitals, and multi-room home installations\u003c\/li\u003e\n\u003cli\u003eDVB-T and DVB-C output modes in one unit means it works on existing terrestrial or cable infrastructure without purchasing separate models\u003c\/li\u003e\n\u003cli\u003eThe OLED display and joystick make channel number, network name, and LCN configuration straightforward without a PC\u003c\/li\u003e\n\u003cli\u003e4 Watt consumption keeps operating costs minimal for always-on installations\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Anttron","offers":[{"title":"Default Title","offer_id":56579912860030,"sku":"220134","price":140.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675354579326.webp?v=1779555556"}],"url":"https:\/\/lynk.gr\/en-eu\/collections\/anttron.oembed","provider":"Lynk.gr","version":"1.0","type":"link"}