{"title":"Satellite Multiswitches","description":"\u003cp\u003eA satellite multiswitch is the key component for distributing satellite TV signals from a single dish to multiple receivers across a home or building. Whether you need to feed two rooms or an entire apartment block, the right multiswitch keeps every receiver independent — each user can watch a different channel at the same time. Explore the full \u003ca href=\"\/en-au\/collections\/tv-antennas-amplifiers\"\u003eTV Antennas \u0026amp; Amplifiers\u003c\/a\u003e category for everything you need.\u003c\/p\u003e\u003ch3\u003eHow Multiswitches Work\u003c\/h3\u003e\u003cp\u003eA multiswitch takes the four polarisation outputs of a universal LNB and combines them with a terrestrial TV input, then distributes the combined signal to each outlet. Each receiver sends a 13\/18V and 0\/22kHz tone to select its required polarisation independently — so two receivers connected to the same multiswitch can tune to different transponders simultaneously.\u003c\/p\u003e\u003ch3\u003eChoosing the Right Size\u003c\/h3\u003e\u003cp\u003eMultiswitches are sized by inputs × outputs — for example, a 5×8 model accepts 4 satellite + 1 terrestrial input and feeds 8 receivers. For larger buildings, cascadable units and trunk amplifiers extend the system further. Pair with \u003ca href=\"\/en-au\/collections\/tv-antenna-amplifiers\"\u003eTV Antenna Amplifiers\u003c\/a\u003e and \u003ca href=\"\/en-au\/collections\/tv-coax-splitters-filters\"\u003eCoaxial Splitters\u003c\/a\u003e to maintain signal strength throughout.\u003c\/p\u003e\u003ch3\u003eInstallation Tips\u003c\/h3\u003e\u003cp\u003eGood quality coaxial cable is essential — we carry suitable cable in our \u003ca href=\"\/en-au\/collections\/power-cables-batteries\"\u003ePower \u0026amp; Cables\u003c\/a\u003e section. Terminate unused ports with 75Ω termination plugs to prevent reflections. For mounting hardware, see our \u003ca href=\"\/en-au\/collections\/tv-antenna-mounting-accessories\"\u003eAntenna Mounting Accessories\u003c\/a\u003e.\u003c\/p\u003e\u003cp\u003eAll purchases are backed by \u003ca href=\"\/en-au\/pages\/buyer-protection\"\u003eLynk Buyer Protection\u003c\/a\u003e, and shipping is free on orders over €80.\u003c\/p\u003e","products":[{"product_id":"johansson-9830-sat-ip-multiswitch-4x2","title":"Johansson 9830 SAT\u003eIP Multiswitch 4×2 – 16 IP Users, Quad\/Quattro LNB \u0026 Gigabit PoE","description":"\u003cp\u003eThe Johansson 9830 is a SAT\u0026gt;IP server multiswitch that converts satellite signals into IP streams, allowing up to 16 users to watch independent satellite TV and radio channels over a standard home or business network. It is designed for installers and integrators who need to distribute satellite content over Ethernet without running additional coaxial cables.\u003c\/p\u003e\n\u003cp\u003eBuilt by Unitron Group, the 9830 connects to a Quad or Quattro LNB and streams SD and HD content via two Gigabit Ethernet ports, each supporting eight independent users. It is suitable for hotels, apartment buildings, offices and any environment requiring flexible multi-room satellite distribution.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSAT\u0026gt;IP V1.2 compliant server\u003c\/li\u003e\n\u003cli\u003e4 satellite inputs for Quad or Quattro LNB\u003c\/li\u003e\n\u003cli\u003e2 Gigabit Ethernet RJ45 outputs (100\/1000 Mbps)\u003c\/li\u003e\n\u003cli\u003eUp to 16 simultaneous IP users (2 x 8 or 1 x 16)\u003c\/li\u003e\n\u003cli\u003e4 trunk outputs for cascading additional multiswitches\u003c\/li\u003e\n\u003cli\u003eDHCP and AUTO-IP automatic addressing\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet (PoE) or optional external 48 VDC adapter\u003c\/li\u003e\n\u003cli\u003eStreams SD and HD satellite TV and radio over IP\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDistribute satellite content using existing network infrastructure\u003c\/li\u003e\n\u003cli\u003eEliminates the need for separate coaxial cabling to each receiver\u003c\/li\u003e\n\u003cli\u003eAllows compatible smartphones, tablets and smart TVs to access live satellite TV\u003c\/li\u003e\n\u003cli\u003eReduces installation time and cabling cost in multi-room deployments\u003c\/li\u003e\n\u003cli\u003eCascade outputs let installers expand systems without replacing the head end\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eModel: Johansson 9830\u003c\/li\u003e\n\u003cli\u003eFrequency range: 950 - 2150 MHz\u003c\/li\u003e\n\u003cli\u003eSatellite inputs: 4 (for Quad or Quattro LNB)\u003c\/li\u003e\n\u003cli\u003eNetwork outputs: 2 x RJ45 Gigabit Ethernet\u003c\/li\u003e\n\u003cli\u003eCascade outputs: 4 trunk outputs\u003c\/li\u003e\n\u003cli\u003eIP user capacity: 2 x 8 or 1 x 16\u003c\/li\u003e\n\u003cli\u003eMaximum input level: 99 dBuV\u003c\/li\u003e\n\u003cli\u003eMinimum input level: 49 dBuV\u003c\/li\u003e\n\u003cli\u003eTrunk attenuation: 2.5 dB\u003c\/li\u003e\n\u003cli\u003ePower supply: 48 VDC via PoE or external adapter\u003c\/li\u003e\n\u003cli\u003ePower consumption: 16 W\u003c\/li\u003e\n\u003cli\u003eProtocol: SAT\u0026gt;IP V1.2 compliant\u003c\/li\u003e\n\u003cli\u003eOperating temperature: 0 to 50 C\u003c\/li\u003e\n\u003cli\u003eDimensions: 210 x 210 x 50 mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eModern IP-based satellite distribution that works with everyday Wi-Fi devices\u003c\/li\u003e\n\u003cli\u003eCompact form factor fits easily into a network cabinet or utility space\u003c\/li\u003e\n\u003cli\u003ePower over Ethernet keeps installation tidy with a single cable per port\u003c\/li\u003e\n\u003cli\u003eFuture-ready design supports growing households and tenant counts\u003c\/li\u003e\n\u003cli\u003eBacked by Unitron Group, a trusted name in satellite distribution equipment\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Johansson","offers":[{"title":"Default Title","offer_id":56563725959550,"sku":"207176","price":750.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671381787006.webp?v=1779627561"},{"product_id":"golden-media-ms-9916lc-multiswitch-9-inputs-16-outputs","title":"Golden Media MS-9916LC Multiswitch – 9 Inputs (8 SAT+1 TER), 16 Outputs \u0026 Active SMATV","description":"\u003cp\u003eThe Golden Media MS-9916LC is an indoor multiswitch designed for SMATV installations requiring distribution of two satellite polarities and bands alongside a terrestrial signal to 16 independent receiver outlets. It accepts 8 satellite IF inputs (covering the 4 polarisation\/band combinations of up to 2 satellites) plus one terrestrial input and one power input, all via F connectors. Built-in amplifiers compensate for splitting losses, and the switching commands cover all four LNB states: 13 V\/0 Hz, 18 V\/0 Hz, 13 V\/22 kHz, and 18 V\/22 kHz.\u003c\/p\u003e\n\u003cp\u003eThe unit is supplied with a power adapter (external, 110–240 V AC \/ 50–60 Hz) and an instruction manual. It is suitable for medium to large SMATV installations in apartment buildings, hotels, and similar multi-outlet environments.\u003c\/p\u003e\n\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e9 inputs: 8 satellite IF (F connectors) + 1 terrestrial + power input\u003c\/li\u003e\n\u003cli\u003e16 tap outputs for independent satellite receivers or TV-SAT sockets\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifiers for satellite and terrestrial signal paths\u003c\/li\u003e\n\u003cli\u003eSupports distribution of 2 satellites to 16 independent receivers\u003c\/li\u003e\n\u003cli\u003eAll four LNB switching commands: 13 V\/0 Hz, 18 V\/0 Hz, 13 V\/22 kHz, 18 V\/22 kHz\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor use\u003c\/li\u003e\n\u003cli\u003eSupplied with external power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eDistributes 2 satellites with terrestrial signal to 16 outlets from a single device, removing the need for cascaded switches\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifiers compensate for tap-insertion losses, maintaining signal levels at all 16 outputs\u003c\/li\u003e\n\u003cli\u003eLNB supply voltage and 22 kHz switching allow each receiver to independently select its preferred satellite band and polarity\u003c\/li\u003e\n\u003cli\u003eTerrestrial signal pass-through delivers antenna TV alongside satellite to every outlet\u003c\/li\u003e\n\u003cli\u003eSuitable for mid-to-large SMATV systems in residential blocks and hospitality venues\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e MS-9916LC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite frequency range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial frequency range:\u003c\/strong\u003e 5–860 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 8 satellite IF + 1 terrestrial + power in (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 16 taps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrunk insertion loss — satellite:\u003c\/strong\u003e 3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrunk insertion loss — terrestrial:\u003c\/strong\u003e 3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap insertion loss — satellite:\u003c\/strong\u003e 2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap insertion loss — terrestrial:\u003c\/strong\u003e 5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation trunk–trunk:\u003c\/strong\u003e \/\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-polar isolation:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap–tap isolation (satellite):\u003c\/strong\u003e 28 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap–tap isolation (terrestrial):\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRejection:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss — trunk in\/out:\u003c\/strong\u003e 12 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss — tap:\u003c\/strong\u003e 8 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level — satellite (IMA 335 dB, EN 50083-3):\u003c\/strong\u003e 100 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level — terrestrial (IMA 360 dB, EN 50083-5):\u003c\/strong\u003e 88 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching voltage:\u003c\/strong\u003e 20 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB power supply max.:\u003c\/strong\u003e 2.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e External adapter, 110–240 V AC \/ 50–60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching commands:\u003c\/strong\u003e 13 V\/0 Hz, 18 V\/0 Hz, 13 V\/22 kHz, 18 V\/22 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBox contents:\u003c\/strong\u003e 1 × Golden Media MS-9916LC Multiswitch, 1 × power adapter, 1 × instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\n\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eOne multiswitch, 16 independent outlets — each receiver chooses its own satellite, band, and polarity independently\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifiers mean no external booster is needed to compensate for the 16-way split\u003c\/li\u003e\n\u003cli\u003eTerrestrial signal is distributed alongside satellite at every outlet — no separate antenna distribution required\u003c\/li\u003e\n\u003cli\u003eExternal power adapter keeps the unit compact and replaces easily if needed\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Golden Media","offers":[{"title":"Default Title","offer_id":56563936592254,"sku":"207190","price":104.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671458660734.webp?v=1779628162"},{"product_id":"golden-media-ms-5516le-multiswitch-5-inputs-16-outputs","title":"Golden Media MS-5516LE Multiswitch 5×16 – 4 SAT + 1 Terrestrial Inputs \u0026 16 Outputs","description":"\u003cp\u003eThe Golden Media MS-5516LE is a passive\/active multiswitch designed for indoor SMATV installations. It accepts four satellite IF inputs and one terrestrial input and routes signals to 16 independent output taps. Built-in amplifiers compensate for distribution losses, making this unit appropriate for medium to large shared antenna systems. An external power adapter is included.\u003c\/p\u003e\u003cp\u003eEach output tap delivers satellite signals in the 950–2150 MHz band and terrestrial signals in the 5–860 MHz band. The switch supports all four DiSEqC switching commands (13V\/0Hz, 18V\/0Hz, 13V\/22KHz, 18V\/22KHz) and can feed LNB power up to 1.2 A total.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5 inputs: 4 satellite IF + 1 terrestrial, plus a power input\u003c\/li\u003e\n\u003cli\u003e16 independent output taps with F connectors\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifiers for active signal distribution\u003c\/li\u003e\n\u003cli\u003eSupports all four DiSEqC switching voltage\/tone commands\u003c\/li\u003e\n\u003cli\u003eTerrestrial pass-through from 5 to 860 MHz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA single unit replaces separate splitters and amplifiers in a shared building installation\u003c\/li\u003e\n\u003cli\u003e16 simultaneous outputs allow each resident to independently select satellite polarisation and band\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplification maintains signal quality across all taps\u003c\/li\u003e\n\u003cli\u003eIncluded power adapter means no extra power supply is needed\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e MS-5516LE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 Satellite IF + 1 Terrestrial + Power In (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 16 taps (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite frequency range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial frequency range:\u003c\/strong\u003e 5–860 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap insertion loss — Satellite:\u003c\/strong\u003e 5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap insertion loss — Terrestrial:\u003c\/strong\u003e 5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross polar isolation:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap-to-tap isolation (Satellite):\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap-to-tap isolation (Terrestrial):\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRejection:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss (Trunk in\/out):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss (Tap):\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite output level (EN50083-3):\u003c\/strong\u003e 100 dB (IMA335dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial output level (EN50083-5):\u003c\/strong\u003e 88 dB (IMA360dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching voltage:\u003c\/strong\u003e 20 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB power supply max:\u003c\/strong\u003e 1.2 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e External adapter 110–240 V AC \/ 50–60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching commands:\u003c\/strong\u003e 13V\/0Hz, 18V\/0Hz, 13V\/22KHz, 18V\/22KHz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eCompact indoor housing mounts cleanly in an equipment cabinet or on a wall\u003c\/li\u003e\n\u003cli\u003eA single cable run from each output tap reaches the receiver — no additional splitters needed downstream\u003c\/li\u003e\n\u003cli\u003eAll-in-one solution with power adapter included reduces installation time\u003c\/li\u003e\n\u003cli\u003eStandard F-connector interface is compatible with any coaxial cable in common use\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Golden Media","offers":[{"title":"Default Title","offer_id":56563965428094,"sku":"207197","price":94.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671465017726.webp?v=1779628266"},{"product_id":"golden-media-ms-5508le-multiswitch-5-inputs-8-outputs","title":"Golden Media MS-5508LE Indoor Multiswitch 5×8 – 4 SAT + Terrestrial, DiSEqC \u0026 PSU","description":"\u003cp\u003eThe Golden Media MS-5508LE is a passive-active multiswitch designed for indoor SMATV installations. It accepts 4 satellite IF inputs and 1 terrestrial input, routing satellite and terrestrial signals to up to 8 independent receivers or TV-SAT outlets simultaneously.\u003c\/p\u003e\n\u003cp\u003eWith built-in amplifiers and an external power adapter included in the box, the MS-5508LE is suited for mid-size to large shared-antenna systems where multiple residents or receivers need independent signal access from a single satellite.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e5 inputs: 4 satellite IF + 1 terrestrial, all via F connectors\u003c\/li\u003e\n\u003cli\u003e8 outputs (taps), each serving an independent receiver or TV-SAT socket\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifiers for maintained signal level across all outputs\u003c\/li\u003e\n\u003cli\u003eSupports all four DiSEqC switching commands: 13V\/0Hz, 18V\/0Hz, 13V\/22KHz, 18V\/22KHz\u003c\/li\u003e\n\u003cli\u003eExternal power adapter supplied (110–240V \/ 50–60 Hz)\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e8 independent outputs allow each receiver to independently select polarisation and band without affecting others\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifiers compensate for insertion and distribution losses across all 8 taps\u003c\/li\u003e\n\u003cli\u003eSingle terrestrial input distributes DVB-T\/analogue signal to all outputs alongside satellite\u003c\/li\u003e\n\u003cli\u003eMemory-free setup: switching commands are handled by the connected receivers\u003c\/li\u003e\n\u003cli\u003eIncluded power adapter means no additional accessories are needed for installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 Satellite IF + 1 Terrestrial + Power In (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 8 taps (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite frequency range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial frequency range:\u003c\/strong\u003e 5–860 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap insertion loss – Satellite:\u003c\/strong\u003e 5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap insertion loss – Terrestrial:\u003c\/strong\u003e 5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-polar isolation:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap-to-tap isolation (Satellite):\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap-to-tap isolation (Terrestrial):\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRejection:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss – Trunk in\/out:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss – Tap:\u003c\/strong\u003e 10 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level – Satellite (EN50083-3):\u003c\/strong\u003e 100 dB (IMA335dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput level – Terrestrial (EN50083-5):\u003c\/strong\u003e 88 dB (IMA360dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching voltage:\u003c\/strong\u003e 20 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB power supply (max):\u003c\/strong\u003e 1.2 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower supply:\u003c\/strong\u003e External adapter 110–240 V \/ 50–60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching commands:\u003c\/strong\u003e 13V\/0Hz, 18V\/0Hz, 13V\/22KHz, 18V\/22KHz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eAll-in-one box with power adapter saves an extra purchase\u003c\/li\u003e\n\u003cli\u003eIndoor design keeps the unit protected from the elements\u003c\/li\u003e\n\u003cli\u003eStraightforward F-connector wiring matches existing coaxial infrastructure\u003c\/li\u003e\n\u003cli\u003eIsolation figures ensure one receiver's tuning commands do not interfere with others\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Golden Media","offers":[{"title":"Default Title","offer_id":56563995574654,"sku":"207199","price":75.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15671472849278.webp?v=1779628358"},{"product_id":"satrix-ms512-hq-multiswitch-5-inputs-12-outputs","title":"Satrix MS512 HQ Satellite Multiswitch – 4 SAT + 1 TER Inputs, 12 Outputs \u0026 External PSU","description":"\u003cp\u003eThe Satrix MS512 HQ is a multiswitch with 4 satellite inputs, 1 terrestrial input, and 12 subscriber outputs. It is part of the MS 5x HQ series, built with components from mobile technology to achieve lower operating temperatures and reduced running costs compared to internally powered units.\u003c\/p\u003e\u003cp\u003eAn external power supply keeps heat generation inside the unit to a minimum, extending component life and improving long-term reliability. The terrestrial path is passive (no amplification), and the unit is fully compatible with return-channel systems for interactive satellite services.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e5 inputs: 4 SAT (Quattro or QUAD LNB only) + 1 terrestrial passive\u003c\/li\u003e\n\u003cli\u003e12 subscriber outputs for simultaneous independent receiver connections\u003c\/li\u003e\n\u003cli\u003eExternal power supply for energy-efficient, low-temperature operation\u003c\/li\u003e\n\u003cli\u003eReturn-channel compatible for interactive services\u003c\/li\u003e\n\u003cli\u003eSupports HD+, 3D, 4K, UHD, Ultra HD, and SKY reception\u003c\/li\u003e\n\u003cli\u003eMounting feet included for secure wall or rack installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eLower internal operating temperature extends product lifespan\u003c\/li\u003e\n\u003cli\u003eExternal PSU reduces electricity consumption and operating costs\u003c\/li\u003e\n\u003cli\u003ePassive terrestrial path avoids over-amplification of the terrestrial signal\u003c\/li\u003e\n\u003cli\u003eReturn-channel support enables video-on-demand and interactive TV services\u003c\/li\u003e\n\u003cli\u003eCompatible with all current and next-generation satellite broadcast formats\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 4 SAT, 1 Terrestrial\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSubscriber outputs:\u003c\/strong\u003e 12\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial amplifier (88–790 MHz):\u003c\/strong\u003e No — passive\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB selection \/ polarity:\u003c\/strong\u003e Analogue 14.5–15.5 V-DC, analogue 22 kHz ± 4 kHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFrequency range:\u003c\/strong\u003e SAT\/IF 950–2150 MHz; Terrestrial 88–790 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eThru loss (subscriber outputs):\u003c\/strong\u003e SAT\/IF @ 950 MHz: −7 dB; SAT\/IF @ 2150 MHz: −0 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial loss (all values ±1.5 dB):\u003c\/strong\u003e Outputs 1–8: −2 dB; Outputs 9–16: −4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. input level:\u003c\/strong\u003e SAT\/IF: 95 dBµV; Terrestrial: 90 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. output level:\u003c\/strong\u003e SAT\/IF IMA3P: 92 dBµV; Terrestrial: 86 dBµV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn loss (inputs\/outputs):\u003c\/strong\u003e \u0026gt;8 dB (typ. 10 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation SAT–SAT:\u003c\/strong\u003e \u0026gt;30 dB; SAT–TV: \u0026gt;35 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eScreening immunity:\u003c\/strong\u003e 47–300 MHz: 85 dB; 300–470 MHz: 80 dB; 470–1000 MHz: 75 dB; \u0026gt;1000 MHz: 55 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eUsable LNBs:\u003c\/strong\u003e Quattro or QUAD LNB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. current from receiver:\u003c\/strong\u003e 40 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. current internal:\u003c\/strong\u003e 40 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower consumption:\u003c\/strong\u003e 250 mA load: 4.5 VA; 500 mA load: 8.5 VA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax. current to LNB:\u003c\/strong\u003e 500 mA, 12 V on LNB input HH\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOperating temperature:\u003c\/strong\u003e −20°C to +60°C (indoor use only)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the box:\u003c\/strong\u003e 1× Satrix MS512 HQ; 1× Power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA single unit distributes satellite and terrestrial signals to 12 rooms without requiring an additional LNB\u003c\/li\u003e\n\u003cli\u003eQuick deployment with the included mounting feet — no custom bracket needed\u003c\/li\u003e\n\u003cli\u003eThe low operating temperature means no forced cooling or ventilation gaps required\u003c\/li\u003e\n\u003cli\u003eCost-effective alternative to cascading multiple smaller multiswitches\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Satrix","offers":[{"title":"Default Title","offer_id":56564349665662,"sku":"207206","price":80.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/satrix-ms512-hq-multiswitch-5-inputs-12-outputs-onetrade_201.jpg?v=1769512985"},{"product_id":"golden-media-ms-1708lc-multiswitch-17-inputs-08-outputs","title":"Golden Media MS-1708LC Multiswitch 17×8 – 4 Satellites \u0026 Built-In Amplifiers","description":"\u003cp\u003eThe Golden Media MS-1708LC is a passive multiswitch with built-in amplifiers designed for medium to large SMATV (Satellite Master Antenna TV) systems. It accepts 16 satellite IF inputs and 1 terrestrial input, and delivers independent satellite and terrestrial signals to 8 receiver outputs. Each output is fully independent, supporting all four switching commands for quattro LNB-based systems.\u003c\/p\u003e\u003cp\u003eThe unit supports signals from 4 satellites distributed to 8 receivers, with separate satellite and terrestrial frequency paths. It is supplied with an external power adaptor (110–240 V \/ 50\/60 Hz) and includes detailed insertion loss and isolation specifications for professional system design.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e17 inputs: 16 satellite IF + 1 terrestrial + power input\u003c\/li\u003e\n\u003cli\u003e8 independent outputs (taps)\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifiers for satellite and terrestrial paths\u003c\/li\u003e\n\u003cli\u003eSatellite frequency range: 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003eTerrestrial frequency range: 5–860 MHz\u003c\/li\u003e\n\u003cli\u003eSupports all 4 switching commands: 13V\/0Hz, 18V\/0Hz, 13V\/22kHz, 18V\/22kHz\u003c\/li\u003e\n\u003cli\u003eLNB power supply max.: 2.5 A\u003c\/li\u003e\n\u003cli\u003eSwitching voltage: 20 V\u003c\/li\u003e\n\u003cli\u003eSupplied with external power adaptor 110–240 V \/ 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e16 satellite IF inputs allow a single unit to handle a full quattro LNB set for up to 4 satellites without any additional signal splitting\u003c\/li\u003e\n\u003cli\u003eBuilt-in amplifiers compensate for insertion losses in the distribution path, maintaining usable signal levels at all 8 outputs\u003c\/li\u003e\n\u003cli\u003eIndependent outputs mean each connected receiver can independently select polarisation, band, and 22 kHz tone without affecting other outputs\u003c\/li\u003e\n\u003cli\u003eTerrestrial input integration eliminates the need for a separate terrestrial splitter, reducing the number of components in the headend\u003c\/li\u003e\n\u003cli\u003eWide-input power adaptor (110–240 V) is compatible with both European and international mains voltages\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Golden Media MS-1708LC\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite Inputs:\u003c\/strong\u003e 16 (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial Input:\u003c\/strong\u003e 1\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 8 (taps)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite Frequency:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial Frequency:\u003c\/strong\u003e 5–860 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrunk Insertion Loss — Satellite:\u003c\/strong\u003e 3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTrunk Insertion Loss — Terrestrial:\u003c\/strong\u003e 3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Insertion Loss — Satellite:\u003c\/strong\u003e 2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Insertion Loss — Terrestrial:\u003c\/strong\u003e 5 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Cross Polar:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Tap-Tap (Satellite):\u003c\/strong\u003e 28 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIsolation Tap-Tap (Terrestrial):\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRejection:\u003c\/strong\u003e 25 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss Trunk in\/out:\u003c\/strong\u003e 12 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReturn Loss Tap:\u003c\/strong\u003e 8 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level — Satellite (EN50083-3):\u003c\/strong\u003e 100 dB (IMA 335 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutput Level — Terrestrial (EN50083-5):\u003c\/strong\u003e 88 dB (IMA 360 dB)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching Voltage:\u003c\/strong\u003e 20 V\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Power Supply Max.:\u003c\/strong\u003e 2.5 A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Supply:\u003c\/strong\u003e External adaptor, 110–240 V \/ 50\/60 Hz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSwitching Commands:\u003c\/strong\u003e 13V\/0Hz, 18V\/0Hz, 13V\/22kHz, 18V\/22kHz\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eA single unit replaces multiple splitters and combiners in the headend, reducing cabling complexity and installation time\u003c\/li\u003e\n\u003cli\u003eThe supplied power adaptor is the only additional component needed — no separate LNB power injectors are required for basic installations\u003c\/li\u003e\n\u003cli\u003eComprehensive isolation and return loss figures allow professional installers to verify system performance against EN50083 standards\u003c\/li\u003e\n\u003cli\u003eGolden Media's SMATV product line is designed for continuous operation in building distribution systems\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Golden Media","offers":[{"title":"Default Title","offer_id":56577701904766,"sku":"207208","price":127.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15674726482302.webp?v=1779632056"},{"product_id":"baff-gold-10-8-g-multiswitch-10-inputs-8-outputs","title":"Baff Gold 10\/8 G SMATV Multiswitch – 9 SAT + 1 Terrestrial Inputs, 8 Outputs \u0026 DiSEqC 2.0","description":"\u003cp\u003eThe Baff Gold 10\/8 G is a passive multiswitch designed for indoor SMATV installations. It accepts 9 satellite IF inputs plus 1 terrestrial input and routes signals to 8 independent satellite receivers or TV-SAT sockets, supporting distribution from 2 satellites simultaneously. The terrestrial signal input allows free-to-air antenna signals to be distributed alongside satellite content.\u003c\/p\u003e\u003cp\u003eThe unit is supplied with a power adapter (16V DC, 2A) and supports DiSEqC 2.0 for compatibility with current receiver firmware. An additional 10th satellite input is available exclusively for use with a quattro LNB for a single band extension.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e10 inputs: 9 satellite IF + 1 terrestrial\u003c\/li\u003e\n\u003cli\u003e8 outputs for independent receivers or TV-SAT sockets\u003c\/li\u003e\n\u003cli\u003eSatellite frequency range: 950–2250 MHz\u003c\/li\u003e\n\u003cli\u003eTerrestrial frequency range: 47–862 MHz\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 command support\u003c\/li\u003e\n\u003cli\u003eLNB power supply: 1500 mA\u003c\/li\u003e\n\u003cli\u003ePower input: 16V DC, 2A via RCA MALE jack\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor use\u003c\/li\u003e\n\u003cli\u003eSupplied with power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDistributes 2 satellites to 8 independent receivers without cross-interference (Cross Polar isolation: 30 dB)\u003c\/li\u003e\n\u003cli\u003eTerrestrial input means a single installation serves both satellite and antenna signal distribution\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 compatibility ensures full control from modern receivers and set-top boxes\u003c\/li\u003e\n\u003cli\u003eHigh output level (SAT max 95 dBμV, terrestrial max 90 dBμV) maintains signal quality across all 8 outputs\u003c\/li\u003e\n\u003cli\u003eIndoor-rated enclosure protects internal components in equipment rooms and risers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Baff Gold 10\/8 G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 9 Satellite IF + 1 Terrestrial + Power In (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 8 taps (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite Frequency:\u003c\/strong\u003e 950–2250 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial Frequency:\u003c\/strong\u003e 47–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss — Trunk Sat.:\u003c\/strong\u003e -1 to -2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss — Trunk Terr.:\u003c\/strong\u003e -3 to -4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss — Sat.:\u003c\/strong\u003e 0 to +3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss — Terr.:\u003c\/strong\u003e -2 to +2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Polar Isolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax SAT Output Level (IMA3):\u003c\/strong\u003e 95 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Terrestrial Output Level (IMA3):\u003c\/strong\u003e 90 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e 16V DC \/ 2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input Jack:\u003c\/strong\u003e RCA MALE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Power:\u003c\/strong\u003e 1500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiSEqC Support:\u003c\/strong\u003e DiSEqC 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Multiswitch, power adapter, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle-unit solution for distributing both satellite and terrestrial signals to 8 rooms or sockets\u003c\/li\u003e\n\u003cli\u003eSupplied with power adapter — no additional accessories needed to get started\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 works seamlessly with standard satellite receivers available today\u003c\/li\u003e\n\u003cli\u003eCompact indoor design installs easily in a cabinet or riser space\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baff","offers":[{"title":"Default Title","offer_id":56578957869438,"sku":"207215","price":90.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675182907774.webp?v=1779636456"},{"product_id":"baff-gold-10-16-g-multiswitch-10-inputs-16-outputs","title":"Baff Gold 10\/16 G SMATV Multiswitch – 9 SAT + 1 Terrestrial, 16 Outputs \u0026 DiSEqC 2.0","description":"\u003cp\u003eThe Baff Gold 10\/16 G is a passive multiswitch designed for indoor SMATV installations serving larger buildings or multi-room environments. It accepts 9 satellite IF inputs plus 1 terrestrial input and routes signals to 16 independent satellite receivers or TV-SAT sockets, supporting simultaneous distribution from 2 satellites. The terrestrial input lets free-to-air antenna signals share the same infrastructure.\u003c\/p\u003e\u003cp\u003eSupplied with a power adapter (16V DC, 2A), the unit supports DiSEqC 2.0 for compatibility with current receiver firmware. The 10th satellite input is reserved exclusively for use with a quattro LNB for a single additional band.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e10 inputs: 9 satellite IF + 1 terrestrial\u003c\/li\u003e\n\u003cli\u003e16 outputs for independent receivers or TV-SAT sockets\u003c\/li\u003e\n\u003cli\u003eSatellite frequency range: 950–2250 MHz\u003c\/li\u003e\n\u003cli\u003eTerrestrial frequency range: 47–862 MHz\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 command support\u003c\/li\u003e\n\u003cli\u003eLNB power supply: 1500 mA\u003c\/li\u003e\n\u003cli\u003ePower input: 16V DC, 2A via RCA MALE jack\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor use\u003c\/li\u003e\n\u003cli\u003eSupplied with power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eDoubles the output count of the 8-port model — serves 16 independent sockets from a single unit\u003c\/li\u003e\n\u003cli\u003eCross Polar isolation of 30 dB prevents signal bleed between satellite polarisations across all 16 outputs\u003c\/li\u003e\n\u003cli\u003eTerrestrial input allows a single cable run to deliver both satellite and FTA antenna content to each room\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 ensures full compatibility with modern receivers and set-top boxes\u003c\/li\u003e\n\u003cli\u003eHigh output levels (SAT max 95 dBμV, terrestrial max 90 dBμV) maintain signal integrity across the full output bank\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Baff Gold 10\/16 G\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 9 Satellite IF + 1 Terrestrial + Power In (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 16 taps (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite Frequency:\u003c\/strong\u003e 950–2250 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial Frequency:\u003c\/strong\u003e 47–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss — Trunk Sat.:\u003c\/strong\u003e -1 to -2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss — Trunk Terr.:\u003c\/strong\u003e -3 to -4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss — Sat.:\u003c\/strong\u003e 0 to +3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss — Terr.:\u003c\/strong\u003e -2 to +2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Polar Isolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax SAT Output Level (IMA3):\u003c\/strong\u003e 95 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Terrestrial Output Level (IMA3):\u003c\/strong\u003e 90 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e 16V DC \/ 2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input Jack:\u003c\/strong\u003e RCA MALE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Power:\u003c\/strong\u003e 1500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiSEqC Support:\u003c\/strong\u003e DiSEqC 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Multiswitch, power adapter, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eSingle-unit solution for 16 rooms or sockets — no stacking of smaller switches needed\u003c\/li\u003e\n\u003cli\u003eSupplied with power adapter so installation can start immediately\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 works seamlessly with standard satellite receivers\u003c\/li\u003e\n\u003cli\u003eCompact indoor design fits in a standard equipment cabinet or riser\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baff","offers":[{"title":"Default Title","offer_id":56578958229886,"sku":"207216","price":106.45,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675183038846.webp?v=1779636461"},{"product_id":"baff-ultra-10-8-mx-multiswitch-10-inputs-8-outputs","title":"Baff Ultra 10\/8 MX SMATV Multiswitch – 9 SAT + 1 Terrestrial, 8 Outputs \u0026 Cascade","description":"\u003cp\u003eThe Baff Ultra 10\/8 MX is an indoor passive multiswitch that distributes signals from 9 satellite IF inputs and 1 terrestrial input to 8 independent satellite receivers or TV-SAT sockets. A key advantage over standard models is the built-in normal\/cascade mode selector switch, which lets the installer configure the unit for standalone operation or as part of a cascaded multi-unit system without additional hardware.\u003c\/p\u003e\u003cp\u003eSupplied with a power adapter (13V DC, 2A) and supports DiSEqC 2.0. The 10th satellite input is available exclusively for use with a quattro LNB for a single additional band.\u003c\/p\u003e\u003ch4\u003eKey Features\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e10 inputs: 9 satellite IF + 1 terrestrial\u003c\/li\u003e\n\u003cli\u003e8 outputs for independent receivers or TV-SAT sockets\u003c\/li\u003e\n\u003cli\u003eNormal\/cascade mode selector switch on the unit\u003c\/li\u003e\n\u003cli\u003eSatellite frequency range: 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003eTerrestrial frequency range: 47–862 MHz\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 command support\u003c\/li\u003e\n\u003cli\u003eLNB power supply: 1500 mA\u003c\/li\u003e\n\u003cli\u003ePower input: 13V DC, 2A via RCA MALE jack\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor use\u003c\/li\u003e\n\u003cli\u003eSupplied with power adapter\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNormal\/cascade switch eliminates the need for a separate cascade adapter when expanding the system\u003c\/li\u003e\n\u003cli\u003eCross Polar isolation of 30 dB prevents signal bleed between satellite polarisations\u003c\/li\u003e\n\u003cli\u003eHigher maximum SAT output level (100 dBμV) compared to the Gold series, better suited to longer cable runs\u003c\/li\u003e\n\u003cli\u003eHigher terrestrial output level (92 dBμV) maintains strong signal delivery across all 8 outputs\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 ensures full compatibility with modern receivers\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Baff Ultra 10\/8 MX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 9 Satellite IF + 1 Terrestrial + Power In (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 8 taps (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite Frequency:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial Frequency:\u003c\/strong\u003e 47–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss — Trunk Sat.:\u003c\/strong\u003e -1 to -2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion Loss — Trunk Terr.:\u003c\/strong\u003e -3 to -4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss — Sat.:\u003c\/strong\u003e 0 to +4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTap Loss — Terr.:\u003c\/strong\u003e -1 to +3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross Polar Isolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax SAT Output Level (IMA3):\u003c\/strong\u003e 100 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax Terrestrial Output Level (IMA3):\u003c\/strong\u003e 92 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input:\u003c\/strong\u003e 13V DC \/ 2A\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower Input Jack:\u003c\/strong\u003e RCA MALE\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB Power:\u003c\/strong\u003e 1500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiSEqC Support:\u003c\/strong\u003e DiSEqC 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eIn the Box:\u003c\/strong\u003e Multiswitch, power adapter, instruction manual\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eNormal\/cascade mode switch makes it straightforward to expand the installation later without replacing equipment\u003c\/li\u003e\n\u003cli\u003eHigher output levels support longer cable runs while maintaining signal quality\u003c\/li\u003e\n\u003cli\u003eSupplied with power adapter so installation can start immediately\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 works seamlessly with standard satellite receivers available today\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baff","offers":[{"title":"Default Title","offer_id":56578958655870,"sku":"207211","price":94.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675183104382.webp?v=1779636465"},{"product_id":"baff-ultra-10-16-mx-multiswitch-10-inputs-16-outputs","title":"Baff Ultra 10\/16 MX SMATV Multiswitch – 9 SAT + 1 Terrestrial, 16 Outputs \u0026 Cascade","description":"\u003cp\u003eThe Baff Ultra 10\/16 MX is a multiswitch that accepts 10 inputs — 9 satellite IF and 1 terrestrial — and routes signals to 16 independent receivers or TV-SAT sockets. It supports distribution of up to 2 satellites plus one additional frequency band, with that additional input requiring a quattro LNB and usable for a single band only.\u003c\/p\u003e\n\u003cp\u003eA mode selector switch allows the installer to configure the unit in normal or cascade mode without additional tools. The unit is supplied with a power adapter and includes F-connector inputs throughout.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10 inputs: 9 satellite IF + 1 terrestrial + power input\u003c\/li\u003e\n\u003cli\u003e16 tap outputs via F connectors\u003c\/li\u003e\n\u003cli\u003eNormal or cascade mode selectable via onboard switch\u003c\/li\u003e\n\u003cli\u003eTerrestrial signal pass-through included\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 command support\u003c\/li\u003e\n\u003cli\u003eLNB power supply up to 1500 mA\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eServes 16 receivers from a single unit, reducing cabling complexity in medium and large SMATV systems\u003c\/li\u003e\n\u003cli\u003eCascade mode enables expansion of the installation without replacing the multiswitch\u003c\/li\u003e\n\u003cli\u003eWide satellite frequency range (950–2150 MHz) ensures compatibility with standard LNB outputs\u003c\/li\u003e\n\u003cli\u003eTerrestrial input (47–862 MHz) allows simultaneous distribution of over-the-air TV signal\u003c\/li\u003e\n\u003cli\u003eSupplied power adapter means no separate PSU purchase is required\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Baff Ultra 10\/16 MX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 9 satellite + 1 terrestrial + power in (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 16 taps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite frequency range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial frequency range:\u003c\/strong\u003e 47–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Trunk Satellite:\u003c\/strong\u003e -1 … -2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Trunk Terrestrial:\u003c\/strong\u003e -3 … -4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Tap Satellite:\u003c\/strong\u003e 0 … +4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Tap Terrestrial:\u003c\/strong\u003e -1 … +3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-polar isolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax SAT output level (IMA3):\u003c\/strong\u003e 100 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax terrestrial output level (IMA3):\u003c\/strong\u003e 92 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower input:\u003c\/strong\u003e 13 VDC \/ 2 A (RCA male connector)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB power supply:\u003c\/strong\u003e 1500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiSEqC support:\u003c\/strong\u003e DiSEqC 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eSingle-box solution for 16-outlet installations keeps equipment rooms tidy\u003c\/li\u003e\n\u003cli\u003eMode switch accessible without disassembly, simplifying on-site configuration changes\u003c\/li\u003e\n\u003cli\u003eF-connector standard throughout ensures compatibility with standard coaxial cabling\u003c\/li\u003e\n\u003cli\u003eIncludes power adapter, instruction manual, and the multiswitch — everything needed to complete the install\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baff","offers":[{"title":"Default Title","offer_id":56578958852478,"sku":"207212","price":109.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675183235454.webp?v=1779636469"},{"product_id":"baff-ultra-10-24-mx-multiswitch-10-inputs-24-outputs","title":"Baff Ultra 10\/24 MX SMATV Multiswitch – 9 SAT + 1 Terrestrial, 24 Outputs \u0026 Cascade","description":"\u003cp\u003eThe Baff Ultra 10\/24 MX accepts 10 inputs — 9 satellite IF and 1 terrestrial — and routes signals to 24 independent receivers or TV-SAT sockets. It supports distribution of up to 2 satellites plus one additional frequency band; that additional input requires a quattro LNB and operates on a single band only.\u003c\/p\u003e\n\u003cp\u003eAn onboard mode selector switch allows configuration in normal or cascade mode without additional tools. The unit ships with a power adapter and uses F connectors on all inputs and taps.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10 inputs: 9 satellite IF + 1 terrestrial + power input\u003c\/li\u003e\n\u003cli\u003e24 tap outputs via F connectors\u003c\/li\u003e\n\u003cli\u003eNormal or cascade mode selectable via onboard switch\u003c\/li\u003e\n\u003cli\u003eTerrestrial signal pass-through included\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 command support\u003c\/li\u003e\n\u003cli\u003eLNB power supply up to 1500 mA\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eServes 24 receivers from a single unit, consolidating signal distribution in larger residential or commercial buildings\u003c\/li\u003e\n\u003cli\u003eCascade mode allows the installation to grow without swapping the multiswitch\u003c\/li\u003e\n\u003cli\u003eWide satellite frequency range (950–2150 MHz) ensures compatibility with standard LNB outputs\u003c\/li\u003e\n\u003cli\u003eTerrestrial input (47–862 MHz) delivers simultaneous over-the-air TV distribution alongside satellite\u003c\/li\u003e\n\u003cli\u003eIncluded power adapter removes the need for a separate power supply purchase\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Baff Ultra 10\/24 MX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 9 satellite + 1 terrestrial + power in (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 24 taps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite frequency range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial frequency range:\u003c\/strong\u003e 47–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Trunk Satellite:\u003c\/strong\u003e -1 … -2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Trunk Terrestrial:\u003c\/strong\u003e -3 … -4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Tap Satellite:\u003c\/strong\u003e 0 … +4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Tap Terrestrial:\u003c\/strong\u003e -1 … +3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-polar isolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax SAT output level (IMA3):\u003c\/strong\u003e 100 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax terrestrial output level (IMA3):\u003c\/strong\u003e 92 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower input:\u003c\/strong\u003e 13 VDC \/ 2 A (RCA male connector)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB power supply:\u003c\/strong\u003e 1500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiSEqC support:\u003c\/strong\u003e DiSEqC 2.0\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eHandles 24-outlet SMATV systems in a single chassis, keeping the equipment room simple\u003c\/li\u003e\n\u003cli\u003eMode switch accessible without disassembly makes on-site reconfiguration straightforward\u003c\/li\u003e\n\u003cli\u003eStandard F-connector interface throughout ensures compatibility with existing coaxial cabling\u003c\/li\u003e\n\u003cli\u003eComplete kit — multiswitch, power adapter, and instruction manual — included in the box\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baff","offers":[{"title":"Default Title","offer_id":56578959245694,"sku":"207213","price":144.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675183366526.webp?v=1779636474"},{"product_id":"baff-ultra-10-32-mx-multiswitch-10-inputs-32-outputs","title":"Baff Ultra 10\/32 MX SMATV Multiswitch – 9 SAT + 1 Terrestrial, 32 Outputs \u0026 Cascade","description":"\u003cp\u003eThe Baff Ultra 10\/32 MX accepts 10 inputs — 9 satellite IF and 1 terrestrial — and distributes signals across 32 independent receivers or TV-SAT sockets. Up to 2 satellites plus one additional frequency band can be distributed; the additional input requires a quattro LNB and is limited to one band.\u003c\/p\u003e\n\u003cp\u003eA built-in mode selector switch configures the unit in normal or cascade mode without tooling. The unit is supplied with a power adapter and uses F connectors on all connection points.\u003c\/p\u003e\n\u003ch4\u003eKey Features\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e10 inputs: 9 satellite IF + 1 terrestrial + power input\u003c\/li\u003e\n\u003cli\u003e32 tap outputs via F connectors\u003c\/li\u003e\n\u003cli\u003eNormal or cascade mode selectable via onboard switch\u003c\/li\u003e\n\u003cli\u003eTerrestrial signal pass-through included\u003c\/li\u003e\n\u003cli\u003eDiSEqC 2.0 command support\u003c\/li\u003e\n\u003cli\u003eLNB power supply up to 1500 mA\u003c\/li\u003e\n\u003cli\u003eDesigned for indoor installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eProduct Benefits\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003eServes 32 receivers from a single chassis, ideal for large apartment blocks or commercial SMATV systems\u003c\/li\u003e\n\u003cli\u003eCascade mode allows the system to be expanded further without replacing the core multiswitch\u003c\/li\u003e\n\u003cli\u003eWide satellite frequency range (950–2150 MHz) ensures compatibility with standard LNB outputs\u003c\/li\u003e\n\u003cli\u003eTerrestrial input (47–862 MHz) distributes broadcast TV alongside satellite on the same cabling\u003c\/li\u003e\n\u003cli\u003eSupplied power adapter means no additional power supply is required at installation\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical Specifications\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eModel:\u003c\/strong\u003e Baff Ultra 10\/32 MX\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInputs:\u003c\/strong\u003e 9 satellite + 1 terrestrial + power in (F connectors)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOutputs:\u003c\/strong\u003e 32 taps\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSatellite frequency range:\u003c\/strong\u003e 950–2150 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTerrestrial frequency range:\u003c\/strong\u003e 47–862 MHz\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Trunk Satellite:\u003c\/strong\u003e -1 … -2 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Trunk Terrestrial:\u003c\/strong\u003e -3 … -4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Tap Satellite:\u003c\/strong\u003e 0 … +4 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eInsertion loss — Tap Terrestrial:\u003c\/strong\u003e -1 … +3 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCross-polar isolation:\u003c\/strong\u003e 30 dB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax SAT output level (IMA3):\u003c\/strong\u003e 100 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMax terrestrial output level (IMA3):\u003c\/strong\u003e 92 dBμV\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePower input:\u003c\/strong\u003e 13 VDC \/ 2 A (RCA male connector)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLNB power supply:\u003c\/strong\u003e 1500 mA\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDiSEqC support:\u003c\/strong\u003e DiSEqC 2.0\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEAN:\u003c\/strong\u003e 8697460232274\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMPN:\u003c\/strong\u003e Ultra 10\/32 MX\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch4\u003eWhy You'll Love It\u003c\/h4\u003e\n\u003cul\u003e\n\u003cli\u003e32-output capacity in one unit reduces the number of devices required in large installations\u003c\/li\u003e\n\u003cli\u003eOnboard mode switch accessible without disassembly for easy field reconfiguration\u003c\/li\u003e\n\u003cli\u003eStandard F-connector interface throughout works with all standard coaxial satellite cabling\u003c\/li\u003e\n\u003cli\u003eBox includes the multiswitch, power adapter, and instruction manual ready for installation\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Baff","offers":[{"title":"Default Title","offer_id":56578959278462,"sku":"207214","price":183.45,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/files\/15675183399294.webp?v=1779636478"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0961\/2250\/3550\/collections\/tv-satellite-multiswitches.webp?v=1780734634","url":"https:\/\/lynk.gr\/en-au\/collections\/tv-satellite-multiswitches.oembed","provider":"Lynk.gr","version":"1.0","type":"link"}